RACE Heat Gun

The RACE Heat Gun is a handheld hot air tool designed to deliver focused heat for applications on roofing, flooring, tarps, and plastic fabrications. It offers interchangeable parts compatible with Leister Triac S and BAK Rion tools. The unit includes a detachable air filter for easier maintenance.

• Voltage (VAC): 120
• Frequency (Hz): 50 / 60
• Power (W): 1,600
• Air flow (l/min): Approx 240
• Static pressure (Pa): Approx 3,000
• Emission level (dB): 64
• Weight (lbs): 2.87 with cord
• Weight with box: 5.8 lbs
• Weight without box: 2.8 lbs
• SKU / Item #: RACE-HW

Q: What sort of environments should the heat gun’s detachable air filter be cleaned for to maintain performance?
A: In dusty or high-particle environments like tear-off or after coating removal, you should check and clean the air filter before each shift to prevent air‐flow reduction, overheating, or element burnout.

Q: How does replacing nozzles or accessories impact the heat gun’s weld quality?
A: Using nozzles sized and shaped properly for the material or joint width ensures even airflow and temperature; mismatched accessories can cause cold welds or burnt surfaces, so match the width and fit the material type accordingly.

Q: What safety checks should you perform before using a hot air welding gun at 1,300 °F?
A: Verify the cord and plug are undamaged, ensure the work area is clear of flammables, wear heat-resistant gloves and eye protection, confirm the tool is on a stable surface or being properly supported, and allow the element to cool before storing.

Q: After heavy use, how can you extend the working life of the heating element and internal components?
A: Let the gun run on cool-air mode (if available) for a minute after use to purge heat, keep the airflow unobstructed, avoid overheating by not holding too long in one spot, and schedule periodic inspections of the element and brushes.