Miro Industries Pipe Supports

The MIRO 1.5PS Pillow Block Pipe Support is a compact rooftop stand engineered for small-diameter piping and conduit. It accommodates pipes up to 1.5 in. inside diameter and 1.9 in. outside diameter, resting on a polycarbonate base that distributes load evenly without roof penetration. This lightweight, non-metallic design ensures durability and protection for modern roof systems. Key Features: supports pipes up to 1.5 in. ID / 1.9 in. OD non-penetrating polycarbonate base protects roof...

The MIRO 3-RAH-8 is an adjustable rooftop roller pipe support designed for gas, conduit, or mechanical piping requiring height flexibility. With an adjustable clearance range of 2.75 to 8 inches, it accommodates thermal expansion while maintaining stability and roof protection. The polycarbonate base and roller system provide a non-penetrating, load-distributing solution for flat and low-slope roofs. Key Features: adjustable clearance range from 3.875 in. to 8 in. supports axial pipe movement...

The MIRO 3-R-4 is a rooftop roller pipe support engineered to carry 3 in. nominal piping while allowing for axial thermal expansion. Its durable polycarbonate base with a low-friction roller distributes loads evenly and eliminates roof penetrations. With a 4 in. pipe clearance, it is an ideal choice for gas, conduit, or mechanical piping across flat and low-slope roof systems. Key Features: accommodates up to 3 in. nominal pipe; supports 3.0–3.75 in. outside diameter 4 in. fixed clearance with...

The MIRO 3-R-2 is a roller-bearing rooftop pipe support designed for gas lines, conduit, and other mechanical piping where thermal expansion must be accommodated. Pipes ride on a low-friction polycarbonate roller and axle seated in a molded base, helping prevent membrane damage while maintaining alignment. The compact, non-penetrating footprint makes it a dependable choice for flat and low-slope roofs. Key Features: accommodates up to 3 in. nominal pipe; supports 3.0–3.75 in. outside diameter...

The MIRO 3-RAH-12 is an adjustable rooftop roller pipe support designed for gas, conduit, and mechanical piping that requires higher clearance. With an adjustable roller height from 5.25 to 12 inches, it ensures proper spacing while accommodating thermal expansion. Its polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof life. Key Features: adjustable clearance range from 3.875 in. to 12 in. supports axial thermal pipe movement with...

The MIRO 1.5 in. Pipe Guide Strap is a purpose-built accessory designed to keep rooftop piping secure, aligned, and protected against unwanted movement. Engineered with pre-drilled holes and supplied with stainless steel screws, this strap ensures quick installation and long-term stability. Designed specifically for use with MIRO Pipe Support systems, it provides a reliable method of restraining 1.5 in. diameter piping in commercial and industrial rooftop applications where weather resistance...

The MIRO 4-RAH-14 is an adjustable rooftop roller support built for 4 in. nominal pipe with up to 4.5 in. outside diameter. With an adjustable clearance range from 4.5 to 14 inches, it provides greater elevation flexibility while allowing pipes to move freely on a low-friction roller. Its durable, UV-stable polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof system life. Key Features: supports 4 in. nominal pipe up to 4.5 in. OD...

The MIRO 4-RAH-10 is a heavy-duty rooftop roller support designed for 4 in. nominal pipe with up to 4.5 in. outside diameter. It provides adjustable clearance up to 9.5 inches while allowing pipes to expand and contract freely on its low-friction roller. Its wide polycarbonate base distributes load evenly without penetrating the roof, ensuring long-lasting protection and reliability. Key Features: supports 4 in. nominal pipe up to 4.5 in. OD adjustable clearance up to 9.5 in. roller design...

The MIRO 5-RAH-8 is a rooftop roller pipe support built for 5 in. nominal pipe up to 5.6 in. outside diameter. Its adjustable roller height from 2.75 to 7 inches provides flexibility for different clearance requirements while ensuring smooth pipe movement for thermal expansion. The durable polycarbonate base distributes loads evenly without roof penetrations, helping protect membranes and extend roof service life. Key Features: supports 5 in. nominal pipe up to 5.6 in. OD adjustable clearance...

The MIRO 5-RAH-12 is a heavy-duty rooftop roller pipe support designed for 5 in. nominal pipe up to 5.6 in. outside diameter. With an adjustable clearance range from 4 to 12 inches, it provides flexibility for elevated piping systems while allowing smooth axial thermal movement. The rugged polycarbonate base distributes weight without roof penetrations, ensuring long-term protection and reliability. Key Features: supports 5 in. nominal pipe up to 5.6 in. OD adjustable clearance range from 4...

The MIRO 3-R-SPACER is an accessory designed to elevate MIRO 3-R-2 and 3-R-4 rooftop pipe supports by 2 inches. Constructed from durable, UV-stable polycarbonate, it maintains the non-penetrating base design while ensuring proper pipe clearance. This simple lift accessory helps meet code requirements or project-specific elevations without altering system stability. Key Features: provides 2 in. of additional clearance for MIRO 3-R-2 and 3-R-4 supports made from durable, UV-stable polycarbonate...

The MIRO 6-RAH-8 is a rooftop roller pipe support engineered for 6 in. nominal piping with outside diameters up to 8.5 inches. Its adjustable roller height from 4.375 to 8 inches allows flexibility for rooftop clearances while enabling free axial thermal pipe movement. With a UV-stable polycarbonate base and roller system, this non-penetrating support protects roof membranes while handling heavy-duty mechanical and HVAC piping loads. Key Features: supports 6 in. nominal pipe up to 8.5 in. OD...

The MIRO 3-R-2 Pipe Guide Strap is an accessory for securing pipes or conduit on MIRO 3-R series supports. Constructed of .040 aluminum 5052 alloy with pre-punched holes, it includes #8 stainless steel screws for simple attachment. The strap provides pipe stability while still allowing for thermal expansion and contraction. Key Features: .040 aluminum 5052 alloy strap with pre-punched holes and stainless steel hardware designed for use with MIRO 3-R series polycarbonate base supports secures...

The MIRO SP-9X15 Rubber Support Pad is a non-penetrating rooftop accessory designed to stabilize pipe supports, conduit, or equipment stands. Made from durable recycled rubber, it features a slip-resistant surface and raised lip edge to help prevent shifting while protecting roof membranes from damage. This larger format pad ensures reliable weight distribution and long-lasting rooftop performance.Key Features: measures 9 in. × 15 in. for larger equipment and pipe support bases slip-resistant...

The MIRO SP-7X10 Rubber Support Pad is a durable rooftop accessory designed to provide a stable, non-penetrating foundation for pipe supports, equipment, or conduit. Constructed from slip-resistant recycled rubber with a raised lip design, it helps prevent movement while distributing weight evenly to protect roof membranes. This pad is lightweight, easy to install, and built to extend the life of both the roof and the supported equipment. Key Features: measures 7 in. × 10 in. for compact...

The MIRO MIR-16-BS-12 Base Strut Rooftop Pipe Support is engineered for rooftop piping and conduit applications, combining strength, adjustability, and roof-friendly design. Its 16-inch polymer base spreads load evenly without roof penetration, while the adjustable strut provides height flexibility from 2.5 inches up to 12 inches. Designed for long-term durability, this support is an ideal solution for mechanical piping, HVAC conduit, and utility lines.Key Features: adjustable strut height...

The MIRO 8-BS-12 is a rooftop base strut support designed for mechanical piping, conduit, and utility lines. With an 8 in. wide polymer base and a galvanized steel strut channel, it offers an adjustable height range from 3.5 in. to 12.875 in. Its non-penetrating design distributes loads evenly, protecting roof membranes while providing long-lasting durability. Key Features: adjustable height range from 3.5 in. to 12.875 in. non-penetrating 8 in. polymer base spreads weight and protects roof...

The MIRO 6-RAH-12 is a rooftop roller pipe support designed for heavy-duty piping systems up to 6 inches nominal size and 8.5 inches OD. Its adjustable roller allows clearance from 4.375 inches to 12 inches, offering installation flexibility while permitting thermal expansion movement. Built with a UV-stable polycarbonate base and roller assembly, this non-penetrating design ensures even load distribution and long-term roof protection. Key Features: supports 6 in. nominal pipe up to 8.5 in. OD...

The MIRO 8-BS-8 is a rooftop base strut support designed to elevate piping, conduit, and utilities while safeguarding roof membranes. It features an 8 in. wide UV-stable polymer base with a galvanized steel strut channel and provides adjustable clearance from 3.5 in. to 8.875 in. Its non-penetrating design distributes loads evenly for long-lasting, stable rooftop installations. Key Features: adjustable height range from 3.5 in. to 8.875 in. non-penetrating 8 in. polymer base protects roof...

The MIRO SP-19X23 Rubber Support Pad is designed to protect and stabilize rooftop equipment supports while safeguarding roof membranes. Its large 19-inch by 23-inch footprint distributes loads evenly, while the slip-resistant surface and raised lip edges help keep equipment securely in place. Built from durable recycled rubber, the pad offers long-lasting rooftop protection without roof penetration. Key Features: Slip-resistant surface with raised lip edges for added stability Large 19" × 23"...

The MIRO 3-R-4 Pipe Guide Strap is a rooftop accessory designed to secure larger pipes on MIRO 3-R series supports. Built from .040 aluminum 5052 alloy with pre-punched holes, it includes #8 stainless steel screws for easy installation. This strap provides stability while still allowing for pipe expansion and contraction, ensuring long-term performance without damaging the roof. Key Features: .040 aluminum 5052 alloy strap with pre-punched holes and stainless steel screws designed for MIRO 3-R...

The MIRO 8-BS-5 is a compact rooftop base strut support designed for conduit and piping runs that require low to medium clearance. With an 8 in. wide polymer base and a galvanized steel strut, it adjusts between 3.5 in. and 5.375 in. in height. Its non-penetrating design distributes loads evenly, protecting roof surfaces while providing stable, long-term support. Key Features: adjustable height range from 3.5 in. to 5.375 in. non-penetrating 8 in. polymer base spreads weight and protects roof...

The MIRO SP-16X18 Rubber Support Pad is a heavy-duty rooftop accessory designed to stabilize and protect equipment supports without roof penetration. Its recycled rubber construction includes drainage holes and a slip-resistant surface to prevent water pooling and shifting while evenly distributing weight across the roof surface. Key Features: Slip-resistant surface for secure equipment stability Drainage holes to prevent water buildup and roof damage Heavy-duty recycled rubber construction...