Clearance!
- 4.375″–12″ Height Range: High-clearance telescoping roller easily levels heavy runs over rooftop obstacles.
- Thermal Expansion Roller: Smooth-rolling cradle prevents pipe binding and stress during thermal cycles.
- 6″ Nominal Capacity: Accommodates large mechanical, gas, and HVAC lines up to 8.5″ OD.
- Non-Penetrating 18″ × 24″ Base: Spreads 305-lb loads over 432 sq. in. without piercing roof membranes.
Price: $105.00
Item #MIR-6-RAH-12
Write a review!
Description
The MIRO 6-RAH-12 is a rooftop roller pipe support designed for heavy-duty piping systems up to 6 inches nominal size and 8.5 inches OD. Its adjustable roller allows clearance from 4.375 inches to 12 inches, offering installation flexibility while permitting thermal expansion movement. Built with a UV-stable polycarbonate base and roller assembly, this non-penetrating design ensures even load distribution and long-term roof protection.
Key Features:
- Supports 6 in. nominal pipe up to 8.5 in. OD
- Adjustable clearance from 4.375 in. to 12 in.
- Roller cradle allows smooth thermal pipe movement
-
UV-stable polycarbonate base distributes loads without roof penetrations
- Backed by a 20-year limited warrant
Specifications
- Model / SKU: MIR-6-RAH-12
-
Pipe capacity: up to 6 in. nominal; maximum OD 8.5 in.
-
Adjustable clearance: 4.375 in. to 12 in.
-
Base dimensions: approx. 18 in. × 24 in.
-
Footprint area: approx. 432 sq. in.
-
Materials: UV-stable polycarbonate base, polycarbonate roller, galvanized hardware
-
Load rating: up to 305 lb per support (evenly distributed static load)
-
Recommended spacing: up to 7 ft on center depending on pipe size and load
-
Design: non-penetrating adjustable rooftop roller stand
How To
- Plan pipe run and determine clearance needs.
- Clean roof surface, ensuring level and stable placement.
- Position each 6-RAH-12 support along the pipe route.
- Adjust roller height between 4.375 in. and 12 in. to meet clearance requirements.
- Set pipe onto roller cradle, ensuring free thermal expansion.
- Install additional supports at intervals up to 7 ft.
- Check alignment, spacing, and load distribution before completing installation.
FAQs
Q: what pipe size can the 6-RAH-12 accommodate?
A: it supports up to 6 in. nominal pipe with maximum 8.5 in. OD.
Q: what is the adjustable clearance range?
A: the roller can be set between 4.375 in. and 12 in. high.
Q: does this support require roof penetrations?
A: no, the polycarbonate base is non-penetrating and protects roof membranes.
Q: what is the maximum load capacity?
A: each support holds up to 305 lb of evenly distributed load.
Q: can it handle pipe expansion?
A: yes, the roller assembly allows axial pipe movement for thermal expansion and contraction.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
![]()
Clearance!
MIRO 16" Base Strut Rooftop Pipe Support - Adjustable 2.5"...
16" strut pipe support system used for ganging roof-mounted piping
Price: $90.50
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO MIR-16-BS-12 Base Strut Rooftop Pipe Support is engineered for rooftop piping and conduit applications, combining strength, adjustability, and roof-friendly design. Its 16-inch polymer base spreads load evenly without roof penetration, while the adjustable strut provides height flexibility from 2.5 inches up to 12 inches. Designed for long-term durability, this support is an ideal solution for mechanical piping, HVAC conduit, and utility lines. Key Features: adjustable strut height...
MIRO 3-RAH-12 Roller Pipe Support - Adjustable 3.875" to...
The MIRO 3-RAH-12 Pipestand offers durable, adjustable-height of 3.875" to 12" roller support for rooftop piping systems, minimizing membrane stress.
Price: $37.50
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 3-RAH-12 is an adjustable rooftop roller pipe support designed for gas, conduit, and mechanical piping that requires higher clearance. With an adjustable roller height from 5.25 to 12 inches, it ensures proper spacing while accommodating thermal expansion. Its polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof life. Key Features: Adjustable clearance range from 3.875 in. to 12 in. Supports axial thermal pipe movement with...
MIRO 4-RAH-10 Roller Pipe Support - Supports Pipes up to...
The MIRO 4-RAH-10 Pipestand provides durable, roller-bearing rooftop support for 4" piping, reducing stress from thermal movement with a Clearance height of 4.5" - 9.5"
Price: $44.60
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 4-RAH-10 is a heavy-duty rooftop roller support designed for 4 in. nominal pipe with up to 4.5 in. outside diameter. It provides adjustable clearance up to 9.5 inches while allowing pipes to expand and contract freely on its low-friction roller. Its wide polycarbonate base distributes load evenly without penetrating the roof, ensuring long-lasting protection and reliability. Key Features: Supports 4 in. nominal pipe up to 4.5 in. OD Adjustable clearance up to 9.5 in. Roller design...
MIRO 4-RAH-14 Roller Pipe Support - Supports Pipes up to...
The MIRO 4-RAH-14 Pipestand offers adjustable rooftop pipe support with a roller-bearing design for smooth thermal movement and roof protection. Adjustable 4.5" to 14"
Price: $54.00
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 4-RAH-14 is an adjustable rooftop roller support built for 4 in. nominal pipe with up to 4.5 in. outside diameter. With an adjustable clearance range from 4.5 to 14 inches, it provides greater elevation flexibility while allowing pipes to move freely on a low-friction roller. Its durable, UV-stable polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof system life. Key Features: Supports 4 in. nominal pipe up to 4.5 in. OD...