Double Portal

The Portals Plus Double Pipe Portal Cover (POR-36052) provides a weather-tight rooftop penetration solution for a combination of small and medium pipes: up to two pipes sized .375″-1″ and up to six pipes sized 1″-2″ in diameter. It features an 18-gauge galvanized roof curb with welded seams, factory-installed wood nailer and 1.5″-thick 3 lb rigid fiberglass insulation. The cover is made of laminated, acrylic-coated ABS plastic with two 8″ collared openings. Two EPDM compression-molded caps...

The Portals Plus Double Pipe Portal Cover (POR-36142) is designed for roof penetrations where multiple small-diameter pipes (0.375″-1″) must be sealed through one assembly. It includes an 18-gauge galvanized roof curb with integral base plate, continuously welded corner seams, factory-installed wood nailer and 1.5″-thick 3 lb rigid fiberglass insulation. The top cover is laminated, acrylic-coated ABS plastic with two 8″ collared openings and molded sealing rings. Two EPDM compression-molded...

The Portals Plus Double Pipe Portal Cover (POR-36042) is designed for roof areas where up to four pipes measuring 0.375″–1″ and up to four pipes measuring 1″–2″ pass through a single curb. It includes an 18-gauge galvanized roof curb with integral base plate, welded seams, factory wood nailer and 1.5″ thick 3 lb rigid fiberglass insulation. The assembly uses a laminated, acrylic-coated ABS plastic curb cover with two 8″ collared openings and molded sealing rings. Two EPDM compression-molded...

The Portals Plus Double Pipe Portal Cover (POR-36032) provides a durable and watertight solution for dual rooftop pipe penetrations. Designed to fit two pipes between 2–6 inches in diameter, it includes an 18-gauge galvanized roof curb with an integral base plate, welded seams, and factory-installed wood nailer. The laminated, acrylic-coated ABS cover features two 8-inch collared openings with molded sealing rings. Each C-126 EPDM compression-molded cap includes a stainless steel Snaplock...

The Portals Plus Double Pipe Portal Cover (POR-36092) is engineered for roof installations where multiple medium-sized pipes between 1″ and 2″ in diameter require flashing. It includes an 18-gauge galvanized roof curb with integral base plate, continuously welded corner seams, factory-installed wood nailer, and 1.5″-thick 3 lb rigid fiberglass insulation. The cover is molded ABS plastic with a laminated acrylic coating and includes two 8″ collared openings. Two EPDM compression-molded C-412...

The Portals Plus Double Pipe Portal Cover (POR-36062) provides a reliable solution for multiple pipe penetrations in commercial roofing. It supports up to six pipes sized .375″-1″ in diameter and up to two pipes sized 1″-2″ in diameter. The unit features an 18-gauge galvanized roof curb with welded seams, a factory-installed wood nailer, and 1.5″-thick 3 lb rigid fiberglass insulation. The curb is topped with a laminated, acrylic-coated ABS plastic cover featuring two 8″ collared openings and...

The Portals Plus 36002 Double Pipe Portal Cover with C-126 & C-212 Caps (Tan) is a complete dual-portal flashing system. The unit includes a laminated, acrylic-coated ABS plastic curb cover that features two 8″ collared openings with molded sealing rings. It is paired with two EPDM compression-molded caps: model C-126 and model C-212, each equipped with stainless-steel Snaplock clamps. The product is specified for roof penetrations where up to two pipes ⅜″-1″ in diameter, up to two pipes 1″-2″...

The Portals Plus Double Pipe Portal Cover (POR-36022) provides a reliable solution for sealing multiple roof penetrations. Designed for one large 2–6 inch pipe and up to four smaller 0.375–1 inch pipes, it features an 18-gauge galvanized roof curb with factory-installed insulation and a laminated ABS plastic cover. Two EPDM compression caps, models C-126 and C-481, include stainless steel Snaplock clamps to create a weather-tight, flexible seal that accommodates roof movement and pipe...

The Portals Plus Double Pipe Portal Cover (POR-36102) is designed for commercial rooftop penetrations where multiple smaller and medium-sized pipes must be routed. It features an 18-gauge galvanized roof curb with integral base plate, continuously welded corner seams, and factory-installed 1.5″-thick 3 lb rigid fiberglass insulation. The laminated, acrylic-coated ABS plastic curb cover includes two 8″-collared openings fitted with two EPDM compression-molded caps (models C-412 and C-481) each...

The Portals Plus 36012 Double Pipe Portal Cover with C-126 & C-412 Caps (Tan) provides a dual-portal flashing solution for roofs needing one large and multiple small penetrations. It includes a laminated, acrylic-coated ABS cover with two 8″ collared openings and molded sealing rings, plus two EPDM caps (models C-126 and C-412) each fitted with stainless-steel Snaplock clamps. Designed for use with a compatible RC-A roof curb, this assembly accommodates one 2″–6″ and up to four .1″–2″ pipes....