Gray EPDM 1/4 in. Notched Squeegees

This notched squeegee features a non-marking gray EPDM blade with a steel backing and a replaceable design. The blade is 1/4 inch thick, and it requires a 1-1/8 inch diameter tapered handle (not included). It is listed for use with polyurethane coatings, epoxies, and general floor coating applications.

Key Features:

• Non-marking gray EPDM blade
• Steel backing
• 1/4 inch thick, replaceable blade
• Compatible with 1-1/8 inch tapered handles
• Suitable for polyurethane coatings, epoxies, floor coatings

• Item #: 8493
• Blade thickness: 1/4 in
• Material: gray EPDM (non-marking)
• Backing: steel
• Replaceable blade
• Handle not included
• Handle compatibility: 1-1/8 in diameter tapered handle
• Applications: polyurethane coatings, epoxies, floor coatings

Q: What wet film thickness (WFT) is typically achieved using a ¼-inch V-notched squeegee for coatings?
A: According to industry guides, a ¼-inch V-notch can deliver around 20 mils wet film thickness under normal conditions.

Q: Why choose an EPDM blade for a notched squeegee among other rubber compounds?
A: EPDM offers excellent resistance to chemicals, solvents and UV exposure, and retains its notch definition longer, which supports consistent film delivery in demanding coating applications.

Q: What factors can affect the actual coverage and mil thickness when using this tool?
A: Coverage is influenced by substrate porosity, applicator pressure, angle and speed, material viscosity and whether a back roll is used. As a result, actual thickness may vary from nominal values.

Q: How can I tell when the notches on the squeegee are worn and need replacing?
A: When the notch edges round off, you see inconsistent ridges, or the coverage per gallon increases, those are signs the blade’s effectiveness is diminished and should be replaced.