Best Price Guaranteed
Price: $34.25
    Item #E-WS-4-50C
    Write a review!

    Description

    To seal all windows when installed regardless of surfaces being joined. WindowSeal Tape creates a moisture tight, air and vapor barrier and can be applied during extremely cold temperatures easily. WindowSeal features EternaBond’s self-sealing advanced MicroSealant™ Technology, a sealant so advanced it permanently bonds to create a permanent, flexible seal to a wide range of surfaces including glass, wood, aluminum, vinyl, OSB, polyethylene, polypropylene, polystyrene, Tyvek™, fiberglass, brick, concrete, masonry, and virtually all construction materials.

    Basic Use
    WindowSeal Tape is a self sealing adhesive that creates a water tight seal between the window frame and virtually all structure surfaces. Irregular or curved surfaces are easy because Eternabond WindowSeal is extremely conformable. WindowSeal, if kept warm (room temperature+) prior to installation can be installed at temperatures as low as 20ºF, and as low as -20ºF with optional EternaPrime. No staples or nails required.

    Composition
    WindowSeal utilizes EternaBond’s advanced MicroSealant™ Technology, a 100% solids formulation of synthetic resins, thermoplastics, and non-curing rubbers, with a built in primer on a stretchable, low density polyethylene (LDPE) backing.

    Technical Data
    Standard roll size: 4’, 6’, X 50’
    Standard case quantity: 100 sq. ft. per case
    Available widths: up to 48"
    Application temp: Above -20ºF
    Total thickness: 20 mils
    Peel adhesion: 135 oz/in width
    Flexibility: Excellent
    Bacteria resistance: Excellent
    Fungal resistance Excellent
    Low temp flexibility: Excellent
    Sag rating: >200ºF
    Water absorption: Less than .05%
    Shelf life: Up to 5 years

    Surface Preparation
    Surface must be clean and dry. Moisture, dust, dirt, and other foreign matter should be removed. Remove oil, grease, etc. with a suitable cleaner.

    Application
    Eternabond EternaPrime has been developed specifically for use with WindowSeal and all Eternabond Tapes. Use EternaPrime before applying Eternabond WindowSeal Tapes over a dirty or rusty surface. Use the EternaPrime if the roof temperature is below 40ºF. Let EternaPrime dry to a tacky consistency before applying Eternabond WindowSeal Tapes. To apply the WindowSeal, remove the release liner and apply to the surface(s) to be protected or sealed. Rub to activate.

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Leave a message