WUKO Cutting and Detail Tools

WUKO Clipper 1020 C2A - with cordless drive, including battery charger and two batteries FEATURES Runs through sheet metal without vibrations or curlsIdeally suited for straight and curved, short and long sheet metal cuttingAlso for cutting tapered panelsTo be used in the workshop and at siteEquipped with a roller assembly to cut longer metal sheets placed on the floor in an easy and quick wayFor cutting according to marks or - equipped with an adjustable guide (accessory - see below) - for...

Forged cutter head and handle: Cutter head and handle are drop-forged as a single unit. This is what makes them so robust and reliable.Induction hardened cutting edges: Extra hard cutting edges guarantee more increased durability and optimal cutting results.Bolted joint: All conventional metal snips can be disassembled for easy sharpening, thus extending their service life!Best used for sheet metal applications: cutting gutters, downspouts, general sheet metal work, HVAC, metal roofing etc....

Handy tool for quick and clean cutting Cuts up to 26 gauge of sheet metal The Wuko Cutter 1070 is a great tool for quick sheet metal cuts. It features an ergonomic handle. Includes an extension rod, to be easily and quickly attached / removed on demand. Ideal for the workshop as well as for the site for straight and slightly curved cutting. Great for cutting off from coil.Includes carrying caseAnother great tool from the Wuko Arsenal.This tool can be used on most sheet metals. Commonly on...

Features: Easy to hold – Smooth Cutting ActionExtremely compact cutter headThese snips enable more capacity, precision and comfort with easier

The PICARD 1004951 Sheet Metal Hammer is a premium, German-engineered tool designed for professional metalworking, roofing, and fabrication applications. Built to meet the highest standards of durability and precision, this hammer features a forged alloy steel head that is carefully hardened and tempered to deliver consistent performance under demanding jobsite conditions. Designed in a traditional German pattern, the hammer includes a ground face and cross peen with chamfered edges, allowing...

The WUKO 1004928 Wedge-Shaped Metal Working Hammer is a precision tool designed for shaping, forming, and adjusting sheet metal without damaging the surface. Featuring a special plastic hammer head, this tool delivers controlled striking power while preventing marks, dents, or surface distortion—making it ideal for finished or coated materials. Its wedge-shaped design allows for accurate force application in tight areas and along edges, giving users greater control when working on seams,...

Features: Comfortable Wood Handle1 5/8" Head DiameterHard Plastic Soft-face EndsEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingMade for very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handle

WUKO’s 1080 Trimmer is a self-propelling power tool used for removing old single or double-lock standing seams including clips. This trimmer features a forward & backward run for cutting in both directions, the cutting wheels are protected for a much safer use. Unlike other trimmers WUKO’s 1080 can be inserted to the seam from above, saving you time & increasing productivity. Self-propelling power tool for removing old standing seams Features: For cutting off single or double-lock standing...

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Traditional European Tin snips: Best for circular cuts and semi-circular edges. High quality steel, painted handles. Features: For short, straight and curved cuts (Perfect for a small radius)Very slick cutting headAvailable in right or left cutting versionsD214 Painted handlesD114 PVC dipped handles ...

Traditional European Tin snips: Best for circular cuts and semi-circular edges. High quality steel, painted handles. Features: For short, straight and curved cuts(Perfect for a small radius)Very slick cutting headAvailable in right or left cutting versionsD214 Painted handlesD114 PVC dipped handles ...

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Features: Comfortable Wood Handle1 3/8" Head DiameterEasily interchangeable nylon headsGentle on the joints and low in noiseVery wear-resistantNo chippingFor very high impactVery secure shaft-head connection thanks to aluminum wedge and locking pinDouble curly hickory handleHard Plastic Soft-face Ends

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting BladesHrc Up to 64. Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

Mini compound leverage shape for tight cuts! Extremely compact cutting head : The design of the uniquely compact design head offers one tremendous maneuverability, the ability to cut the narrowest radii and the ability to reach some of the most difficult to access spots.Practicable combination of bar and arrester: A practical locking mechanism allows one to open and close with one hand and limits the maximum opening of the snip. Compound leverage, Compound leverage considerably reduces...

One round face, one horizontal face, finely polishedFor Sheet Metal Mechanics, Plumbers and Roofers PICARD planishing and grooving hammer with one round and slightly arched polished face and one polished cross peen. Features: Grey hammer effect enamel Made from alloyed PICARD special - steel, carefully hardened and tempered Head and handle with ring wedge fixture Ash handle Channels different intensity and differently arched One Round Face One Horizontal Face Finely Polished Steel ...

WUKO’s 1250 Rotary Sheet Metal Shear features an in-feed support plate made of stainless steel. The Shear comes with an adjustable stop, helps leave a perfect cut every time. Two carrying handles makes it easy to transport to & from the job site. Options:Slides Right to Left - 1005321Slides Left to Right - 1016807Features Max. sheet metal thickness: Galvanized steel: 0.8 mm/0.031″Aluminium, copper, zinc: 1.0 mm/0.039″Stainless steel: 0.6 mm/0.024"Perfect cut every timeVery low weightWeight: 35...

Special High Quality Steel Snips No slipping even without serrations Optimised leverage ratio: 25% less effort ERGO-handle for increased comfort reduced hand fatigue!Features: Mini Shape & Straight Cutting Snips All the power of full size aviation snips but 25 % smaller the best for small cutting areas High-quality steelRight Cut ...

Features: Comfortable Wood Handle 2" Head Diameter Hard Plastic Soft-face Ends Easily interchangeable nylon heads Gentle on the joints and low in noise Very wear-resistant No chipping Made for very high impact Very secure shaft-head connection thanks to aluminum wedge and locking pin Double curly hickory handle

Compound-action snips have 2 pivot points and are spring loaded to lessen user fatigue. FEATURES Material: Alloy steel, Overall Length: 10"Features: High Grade Steel Cutting Blades - Hrc Up to 64.Optimized Leverage Ration - 25% Less Effort. Compact Cutter Head.

For cutting equally wide strips (up to 625 mm/24.6') you can fit out the WUKO Clipper with the adjustable guide. Kit includes two (2) additional rods that can be used as extension rods for a width of up to roughly 24 ½ inches. WUKO Adjustable Guide for the Cipper C2A Only

Wuko’s Rotary Sheet Metal Shears are made of high resistance, non-corrosive materials. The Wuko 1010 is a clamping device that uses pressure bolts to fix materials. The cutting wheel featured on this rotary is adjustable & made of high quality, hardened steel. Available in four working widths: 1.00 m/40″ (1005289) - weight 57 kg/126 lbs 1.25 m/50″ (1005297) - weight 63 kg/139 lbs 1.50 m/59″ (1005305) - weight 69 kg/152 lbs 2.00 m/79″ (1005313) - weight 85 kg/187 lbs ...

The WUKO Clipper 1022 is the amazing little slitter that delivers smooth, vibration-free cutting through sheet metal — without curls or distortion. Engineered and manufactured in Austria, this compact yet powerful cutting tool is designed for precision, efficiency, and professional-grade results in both workshop and job site environments. Whether you're cutting straight lines or smooth curves, short sections or long panels, the Clipper 1022 provides clean, controlled performance with variable...