U.S. Aluminum TS Twist Roof Strap Gutter Hanger, 100/ctn

Built for low-profile strength, the U.S. Aluminum TS Twist Roof Strap Hanger installs under the shingle line and twists down to the gutter hem for a clean, hidden look. The strap spreads load along the roof deck, helping long runs stay straight through storms and seasonal debris. Corrosion-resistant construction and an installer-friendly bend make layout fast on new installs or repairs. Packed 100 per carton to keep crews moving on big jobs.

Features

• Under-shingle, twist-to-hem design for a clean, hidden appearance
• Load-spreading strap supports straighter runs on long eaves
• Corrosion-resistant construction for year-round outdoor durability
• Installer-friendly strap geometry for quick bend, align, and fasten
• Compatible with common 5" and 6" K-style gutter systems
• 100-count contractor pack for efficient stocking and production

• Brand/Model: U.S. Aluminum TS (Twist Roof Strap Hanger)
• Product Type: Under-shingle, twist-to-hem strap hanger for K-style gutters
• Material: Aluminum strap, corrosion-resistant (mill finish)
• Dimensions (Each): ~18–22" L × ~0.75–1.00" W × ~0.030–0.040" T (approx.; batch dependent)
• Weight (Each): ~0.09–0.13 lb (approx.)
• Weight (Carton, 100/ctn): ~9–13 lb (approx.)
• Compatibility: Standard 5" and 6" K-style aluminum/steel gutters
• Profile/Design: Low-profile strap installs under shingles; twist leg fastens to gutter hem for hidden support
• Fasteners: Exterior-rated roofing nails or screws for deck; gutter screws/rivets for hem (match substrate)
• Installation Spacing: ~24" O.C. typical; tighten to ~18" O.C. in snow/wind/high-load zones (follow local code/manufacturer guidance)
• Load/Use: Residential & light-commercial eaves; supports long runs with distributed load path
• Operating Environment: Exterior, all-weather; rust-proof substrate
• Finish Options: Mill aluminum; field/factory paintable to match system
• Carton Quantity: 100 hangers per carton
• Notes/Standards: Contractor-grade hardware; verify roof deck condition, underlayment, and local code requirements before installation

Q: Will these strap hangers work with both 5" and 6" K-style gutters?
A: Yes. They’re designed for standard 5" and 6" K-style systems; verify hem profile on specialty gutters before installation.

Q: How are they installed under the shingles without causing leaks?
A: Slide the strap beneath the shingle/drip edge onto the roof deck, fasten into framing with exterior-rated roofing nails or screws, twist the strap to the gutter hem, and secure with gutter screws/rivets. Use compatible sealant at penetrations as required by local code and best practice.

Q: What spacing should I use between strap hangers?
A: Typical spacing is ~24" on center. In snow/wind/high-load zones or on long, heavy runs, tighten to ~18" O.C. or follow local code/manufacturer guidance.

Q: Are these aluminum straps durable in coastal or wet climates?
A: Yes. The mill-finish aluminum won’t rust. For coastal exposure, pair with corrosion-resistant fasteners and compatible gutter components for maximum longevity.