Everhard MR13110 - Brass V Roller

Built for precision in tight corners and change-of-plane details, the MR13110 uses a solid brass V-profile wheel to deliver firm, even pressure exactly where flat rollers can’t reach. The V shape nests into inside angles, ribs, and step-downs to help you consolidate seams cleanly without scuffing adjacent surfaces. Paired with a rigid frame, smooth bearings, and a comfortable handle, it’s a go-to finisher for detail flashing on TPO, PVC, and EPDM.

Key Features

• Brass V-profile roller focuses pressure into angles, ribs, and channel details for crisp, uniform consolidation
• Solid brass wheel maintains heat well and rolls smoothly during hot-air weld finishing
• Smooth, enclosed bearings for consistent, chatter-free tracking
• Rigid single-fork frame keeps hardware clear of the contact path for precise control
• Ergonomic 5″ handle provides secure grip and knuckle clearance near walls and curbs
• Non-marring performance on single-ply membranes; ideal for corners, transitions, penetrations, and tight flashing work
• Jobsite-ready durability designed for daily professional use
• Made in the USA to Everhard’s professional standards

Roller material: Solid brass V-profile (detail) wheel — heat-resistant and precise in tight angles. 

Roller size: 1-1/8″ diameter × 0.196″ width (≈ 28.6 × 5.0 mm). 

Fork style: Offset “gooseneck” single fork for reach and line-of-sight. 

Handle: 5″ wood handle for a solid, familiar grip.

Bearings: Enclosed ball-bearing action for smooth, durable rolling. 

Weight: ≈ 0.350 lb (0.16 kg) per roller.

UPC / pack qty: 095412131107; typically 6 per carton. 

Origin: USA-made roofing tool line.

• Grip the 5″ wood handle with a stable, comfortable hold.
• Position the brass “V” roller tip into the seam, corner, or tight angle you want to press.
• Roll the roller along that seam or corner using steady pressure, guiding the “V” edge into the joint.
• Reverse direction if needed to reinforce adhesion or remove small gaps.
• Use in flashing details, around pipe penetrations, or wherever a sharp angle needs pressure.
• After use, wipe off any adhesive, debris, or residue from the roller surface.
• Store the detail roller in a dry place to protect the brass and bearing mechanism.

Q: What is the MR13110 Brass V Roller used for?
A: Finishing tight detail work on single-ply roofs—inside corners, change-of-plane seams, ribs, and step-downs—where a flat roller can’t reach.

Q: Why a brass V-profile instead of a flat steel or silicone wheel?
A: The V shape focuses pressure into angles for crisp consolidation, and the brass wheel glides smoothly (especially during hot-air weld finishing) while helping reduce visible track lines on adjacent surfaces.

Q: What are the size, weight, and handle details?
A: The wheel is about 1-1/8″ diameter × 0.196″ width, weighs roughly 0.350 lb (0.16 kg), and mounts on an offset “gooseneck” single fork with a 5″ wood handle for reach and line-of-sight control.

Q: Any tips for best results and care?
A: Use steady, even passes with light-to-moderate pressure; let the V ride the corner rather than forcing it. Keep the wheel clean, protect the enclosed bearings from debris, wipe down after use, and store the tool dry.