Edge Rollers

Bends up to 8" of Sheet Metal From 0° to 90° The Wuko Uni Bender 2204 substitutes models 2200 and 2202 and their longer versions. It is the shorter version of model 2354. This is a great do-it-all model from the Wuko Bender lineup. The single set of rollers allows for radius bends (smaller outside radius are possible when compared to inside radius). Its larger size also works very well on straight sections because of its one set of 4 rollers. If acquiring only one set of Wuko Benders, this is...

Makes 5/8" to 4" Bends in 29-22 Gauge Steel. The center roller station features a precision depth gauge on one shaft leg that, when locked in place at the desired setting, accurately aligns the depth of all roller stations. The center roller station is also independently adjustable, with outer roller stations retracted and locked, allowing for bending on a curve.

Wuko Duo Bender 3202 with case The Wuko Duo 3202 bender (formerly 3200) features two bending wheels, specially designed for quick and easy bending of long, straight, sheet metal strips. Its function is equal to that of the Wuko Uni Bender, but it’s equipped with a second pair of bending rolls and a handle. Featuring two sets of rollers, this Wuko bender is ideal for longer straight lines, like gutters or roof panels.  Wuko benders are a must have tool for metal roofers, those bending...

Bends up to approximately 2" of Sheet Metal From 0° to 90° The Wuko Mini Bender 2050, a larger version of the 2020, is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally.This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for the 1/4" bends needed for the Pittsburg...

Bends up to 1 1/4" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4040 is an ideal tool to create hems. It features a thin bending wheel, which allows for bends from 90° up to 180°.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the standing seams needs to be bent by hand, like in a starter panel.Wuko...

Bends up to 8" of Sheet Metal From 0° to 100° The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is really intended for more straight lines.Another great tool from the Wuko Arsenal.Wuko benders are a...

The Wuko Hem Bender 8200 offers the ability of making bends from 0° up to 180°. The only Wuko tool that does both a regular 90° bend like Wuko Duo Benders then a hem as a second step.- Includes carrying case- Another great tool from the Wuko Arsenal.- Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the standing seams needs to be bent by hand, like in a...

The Wuko Mini Bender 2020 is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally. This is a great tool for sheet metal workers, HVAC workers and metal roofers. It is a must have for doing the 1/4" bends needed for the Pittsburg lock.This tool can be used on most sheet metals. Commonly on copper, zinc, steel,...

Bends up to 7/8" of Sheet Metal From 90° to 180° - Ideal for Hems and Radius bends The Wuko Bender 4010 is an ideal tool to create small hems and radius bends, both inside and outside. It features a thin bending wheel, which allows for bends from 90° up to 180°.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels where one of the...

Bends up to 1 9/16" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4000 is an ideal tool to create hems in long pieces of metal by featuring 2 discs. No adjustments are needed, creating precise results. The ideal tool to create hems while not damaging finished metals.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or triangular shaped panels...

Bends up to 8" of Sheet Metal From 0° to 100° The Wuko Uber Bender Duo 7200 features two bending angled wheels, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Unlike the 6200, this bender features two sets of rollers and a handle, making it ideal for longer straight lines.Includes carrying caseAnother great tool from the Wuko Arsenal.Wuko benders are a must have tools for...

For Edging Curved Sheet Metal and Producing Tight Radii Freund Radius Roller 50 Edge Bender bends inside and outside radii, infinitely adjustable bend height from 0.2″ to 1.96″. Freund 91631000 Radius Roller 50 Edge Bender Bends inside and outside radii [36″ radius is nominal, but can be made tighter depending on type of material]Infinitely adjustable bend height from 0.2″ to 1.96″Bends copper, zinc, aluminum up to .032″ and steel up to 22gaEasy to read scale with both inches and mm...

This Wuko bender set provides quick and easy bending of straight sheet metal strips. The Wuko 7200/4000 set is the perfect starter kit: Super easy to use and does the trick on any straight panels you work with! The Uber Bender 7200 prevents any damage on delicate, color-coated material plus lets you bend an extra 10 degree on any spring back material. The Disc-O-Bender 4000 gives you maximum stability when making the hem. Just like the 7200, it works super gently on any delicate materials...

For Edging Curved Sheet Metal and Producing Tight Radii Freund 91630000 Radius Roller 25 Edge Bender bends inside and outside radiuses, infinitely adjustable bend height from 0.2″ to 0.98″. Freund 91630000 Radius Roller 25 Edge Bender Bends inside and outside radiuses [36″ radius is nominal, but can be made tighter depending on type of material]Infinitely adjustable bend height from 0.2″ to 0.98″Bends copper, zinc, aluminum up to .032″ and steel up to 22gaEasy to read scale with both inches...

The Wuko Uni Bender can be used for bending and forming in sheet metal fabrication Features: The 'longer' brother of the Wuko Uni Bender 2204For bending straight sheets and radius up to 90°.Improved version of the 2200 & 2202 models: narrower, yet still equipped with 4 rollers and more efficient in bending common sheet metal, notably zinc and copper.This model has an increased ability to bend inside radius and easier creation of standing seam profiles (male and female).Adjustable bending...

The WUKO 9050 Bogie Bender is designed to handle sheet metal bending on inside/outside curves, as well as straight pieces. The support plates are able to be unlocked to rotate freely around tight curves while still providing support edges for a crisp bend. WUKO tools are excellent in quality and well known throughout the roofing industry. Key Features: Two swivel joints with three roller stops each give outstanding stability Designed to lean into all kinds of curves - both inner and outer...

The Wuko Duo 3352 bender (former 3350) is a longer version of the Wuko 3202. It features two bending wheels, especially designed for quick and easy bending of long, straight sheet metal strips. Its function is equal to that of the WUKO Uni Bender, but it’s equipped with a second pair of bending rolls and a handle.  FEATURES Featuring two sets of rollers, this an ideal bender for longer straight lines as in gutters or roof panels.Another great tool from the Wuko Arsenal.Wuko benders are a...

Mobile edge rolling machine for the edging and bending of sheet metal. Premium Single Edge Rollers are similar in design to the Standard Edge Rollers, except they feature four guide rollers and a large handle, adding stability & comfort to the tool making these tools ideal for all straight bend applications. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum. Mobile edge rolling machine for edging and bending of sheet metal, applicable to...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal The Freund Disk Bender is used to continue the bend from 90° to as much as 180° to create beautiful hems on curved flashings! The bend dimension is based on the depth of the 90 degree bend provided. Bends inside and outside radii [36″ radius is nominal, but can be made tighter depending on type of material]The Disk Bender self aligns to the previous bend [3/8″ minimum] up to 1-5/8″Bends copper, zinc, aluminum up to .032″ and...

Lock and Roller tool is used for closing the single-lock standing seam. FEATURES Close profile in both directionsClever system of eccentric lever with disc springs (patent applied for), adjustments of the pressure if necessary Clean and precise result regardless of materialSimple removal of the tool by relieving pressure at any time without scratching Ergonomic handholds above and on both sides of the toolForming rollers of stainless steel Rope tying device includedCarrying case...

Freund Disc Roller S-Model makes bending sheet metal by starting with a 90° bend and continues the bend around to any angle. The Freund Disc Roller S-Model makes bending sheet metal a breeze! The S-Model starts with a 90° bend (made with any rolling edge bender) and continues the bend around to any angle between 90° and 180° by simply rolling the tool back and forth along the sheet metal while applying pressure to bend it over. Features: Aluminum housingStainless steel working parts and...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal Standard Single Edge Benders feature an easy-to-read scale (mm + inch), loops to hang from work belt and are designed primarily for straight bends, though the Single Edge Roller will do gentle outside radii. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum Easily legible mm scale, eyelet for the tool belt, edge height 5 - 200 mm, also suitable for small radii Leading:...

The new WUKO Mini Uber Bender 6050 is a smart handy tool for small radius work. Features: Equipped with an angled bending disc for bending up to 100°Inch scale on the upper shaftTwo roller stops and two support rollersEasily removable handle Adjust the desired bending height with the engraved scale, tighten the wing screw and insert the sheet metal between the bending wheels. The angled bending disc shows in the bending direction. The roller stops should firmly rest against the sheet metal...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal Think of the Freund Tools Disk Rollers as a hemming tools. Once you’ve pre-bent your sheet metal to 90 degrees with a Single Edge Roller or Double Edge Roller, the Freund Disk bender quickly and easily continues the bend over to about 180 degrees to create a crisp and clean hem. Maximum Bending Depth of 1-5/8″. Bends aluminum, copper zinc and steel up to .032″. Bends from 90° profiles to maximum 180°Bending height:...

Mobile edge rolling machine for the edging and bending of sheet metal. Maxi Single Edge Benders are identical in design and purpose to the standard edge roller, but feature an extended bending capacity, allowing bends as far as 13-3/4″ from the edge of the sheet! Bending height: 1/4″ to 13-3/4″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum. Mobile edge rolling machine for the edging and bending of sheet metal, Equipped with four guiding rollers,easily readable scale (mm), hand grip,...

The True 180 Edge Bender rolls along the pre-bent (to 90 degrees) sheet metal edge to create clean crisp hem up to 180 degrees. The perfect companion tool to the True 90, or can be used with any other brand edge bender, including Freund and Malco.Features: 180 degree edge rollerIndustry exclusive spiral scratch guardBends up to 0.040″ thick metalsBends hem from 3/8″ to 1″ maximum depth

WUKO Bender Set 6200/4040 Wuko bender set to bend sheet metal up to 100° and make hems The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is really intended for more straight lines. The Wuko...

The Wuko Mini Uber Bender 6050 is a small tool from WUKO made especially for crispy small radius bends.Its angled bending wheel makes the tool perfect for radius work on springy materials and avoids any scratches on coated sheets.The Wuko Uber Bender 6200 features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. featuring only one set...

Mobile edge rolling machine for the edging and bending of sheet metal. Double Edge Rollers are similar in design to the Standard Edge Rollers, except they feature four guide rollers on each half for a total of 8 guide rollers, adding stability to the tool making these tools ideal for all straight bend applications. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum. Equipped with 4 guiding rollersEasy to read scale (mm & inch)Loops to hang...

WUKO Disc-O-Bender Maxi Twist 4041 Features: For bending sheet metal legs from 90 degree up to 180 degree No free space required at the side for setting the tool on and off Just twist the roller stop by means of the locking bolt, place the tool on the right angle bend, twist the roller stop and start bending The bigger bending disc enlarges the bending height

Bends up to 1/2" of Sheet Metal From 90° to 180° - Ideal for Hems The Wuko Bender 4050 is an ideal tool to create small hems of 0.5" in height. in log pieces of metal by featuring 2 discs. No adjustments are needed, creating precise results. The ideal tool to create hems while not damaging finished metals.Another great tool from the Wuko Arsenal.Wuko benders are a must have tools for metal roofers, those bending metal without a brake / box brake and those making radius roof panels and / or...

Set Includes WUKO Mini Bender 2050 WUKO Disc-O-Bender Twist 4040 Carrying Case Get this for any detail work WUKO Mini Bender 2050 for bending/forming up tp 90 degree: best results for small inner and outer radius WUKO Disc-O-Bender 4040 Twist, Start at 90 degree and bends up tp 180. No free space required at the side for setting the tool on and off Technical Data Weight including case: 6 lbs ...

The True 90 Edge Bender rolls along the sheet metal edge to create clean crisp bend up to 90 degrees. It features a special angled roller that allows 12 degrees of additional clearance so you can get a true 90 degree bend all at a great price!Features: Industry exclusive angled roller for a “true” 90 degree bendAdjustable length bearing shaftBending range (depth) from 3/8″ to 6-1/2″Bends up to 0.040″ thick metalsDims 16"x13"x13"11 lbs ...

Bends up to 14" of Sheet Metal From 0° to 100° The Wuko Uber Bender 6350 is thE longer version of the 6200. It features a thin bending angled wheel, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. featuring only one set of rollers, this bender still gives you the ability to do some radius bending, although it is really intended for more straight lines.Another great tool...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet MetalStandard Double Edge Rollers feature an easy-to-read scale. The Double Edge Roller should be your first choice for very long straight bends. Standard Double Edge Rollers feature an easy-to-read scale (mm + inch). The Double Edge Roller should be your first choice for very long straight bends; the double rollers make the bending faster. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper,...

The Freund Perfect Bender S-150 makes bending sheet metal to a true 90° easy and fast. Bends steel, copper, zinc, aluminum metal sheets. The Freund Perfect Bender S-150 makes bending sheet metal to a true 90° easy and fast. Using the Perfect Bender S-150 is simple. Just a loosen the carriage clamping bolt and slide it to the appropriate laser etched mark on the stainless steel rod to set the bending point. Next slide the S-150 over the edge of the sheet metal and then roll it back and forth...

Bends sheet metal and make hems The Wuko Mini Bender 2020 is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally.The Wuko Bender 4010 is an ideal tool to create small hems and radius bends, both inside and outside. It features a thin bending wheel, which allows for bends from 90° up to 180°.This is a great...

WUKO Bender Set 6050/4040 Set Includes WUKO Uber Mini Bender 6050 WUKO Mini Disc-O-Bender 4040 Carrying Case The best of the best for any detail and radius work WUKO Mini Bender 2050 for bending/forming up to 100 degree: Best results for small inner and outer radius! The angled bending disc prevents any damages on delicate, color-coated material. WUKO Disc-O-Bender 4040 Twist, starts at 90 degrees - 100 degrees and bends up tp 180 degrees: No free space required at the side for setting the...

Mobile edge rolling machine for the edging and bending of sheet metal. Premium Single Edge Rollers are similar in design to the Standard Edge Rollers, except they feature four guide rollers, adding stability to the tool making these tools ideal for all straight bend applications. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum. CAUTION - Maximum Sheet Strength/Thickness: Zinc, Aluminum = 1 mm (0.04 in.)Copper = 0.8 mm (0.03 in.)Steel =...

WUKO Bender Set 2204/3202 Looking for tools to bend a standing seam profile and various other 90 degrees bends? The 2204/3302 Kit is ideal for both radius and straight panels. The Wuko Uni Bender 2204 substitutes models 2200 and 2202 and their longer versions. It is the shorter version of Model 2354.This is a great do-it-all model. The single set of rollers allows for radius bends (smaller outside radius are possible when compared to inside radius).Its larger size also works very well on...

Tool for beading, stiffening and offsetting of sheet metal The Wuko Combo Bender 5000 is a tool made for beading, stiffening and offsetting of sheet metal. It features four roller stops for easier guidance on straight sheet metal strips. Two of the rollers can be quickly and easily removed for working on curves.The throat features an adjustable depth from 0 to 6.5 cm / 0 to 2 1/2". The lower shaft is radially adjustable, forming pressure increase with each passing.This is a great tool for...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal Maxi Double Edge Rollers are identical in design and purpose to the standard edge rollers, but feature an extended bending capacity, allowing bends as far as 13-3/4″ from the edge of the sheet! Bending height: 1/4″ to 13-3/4″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum. Equipped with 4 guiding rollersEasily readable scale (mm/inch)Loops to hang from work beltBending height: 1/4"-13 3/4" CAUTION - Maximum Sheet...

The Wuko Mini Bender 2050, a larger version of the 2020, is made specially for radius inside and outside bends. Because of its small size, it makes it possible to achieve very tight radius. Although intended to bend sheet metal in curves, it also works on straight bends, although not ideally.The Wuko Uni Bender 2204  substitutes models 2200 and 2202 and their longer versions. It is the shorter version of Model 2354.This is a great do-it-all model. The single set of rollers allows for...

Your search for a light, versatile, and modular bending tool is over: look no further than the professional-grade Metal Benders by Malco! Form 0-100° bends on straight or curved panels of any length on the jobsite, without waiting on wholesale rollformers. Metal Benders by Malco are designed or bends on flashing, roofing details, standing seam and exposed fastener metal roofing.Malco's Metal Benders are available in five single-station models:Narrow, 75mm (FS1N75)Narrow, 165mm...

WUKO Bender Set 7350/4000Kit to bend sheet metal up to 100° and make hems The Wuko Uber Bender Duo 7350 is a longer version of the Wuko 7200. It features two bending angled wheels, which allows for bends over 90° up to 100°. It also allows for the bender to be over previous bends, such as bending along longitudinal beadings, or panel profile bends. Unlike the 6350, this bender features two sets of rollers and a handle, making it ideal for longer straight lines.The Wuko Bender 4000 is an...

WUKO Bender Set 3352/4000 This couple enable quick, easy and clean bending/forming of long, straight sheet metal strips. Start off with 0-90 degree and continue to 180 degree. Set Includes: Duo Bender 3352 Disc-O-Bender 4000 Carrying Case Features: WUKO Duo Bender 3352 for bending to 90 degree: Your go-to Bender for straight panels, the uber long shafts allow you a bonding height of up to 14" WUKO Disc-O-Bender 4040 Twist, Start at 90 degree and bends up to 180 degree: No free space required...

The Large Radius roller is an optional replacement 2mm roller available for users wanting a softer bend often needed for material such as copper, zinc, and even some painted materials when the finish is temperamental.  Assembly:  Remove the fasteners retaining the original 0.7mm roller and remove the roller. We recommend you store the original roller in a place where you may use it in the future for jobs requiring a smaller radius.Install the 2mm radius roller then reinstall the...

Roof panel machine for making the profile for single and double-lock standing seams (seam height 25 mm/1″) Model 0420 Machine frame made of modular aluminum profile systemUpper machine cover: Swing doors, easy to open, with safety switch, frame elements made of transparent, impact‐resistant polycarbonate⇒ clear view during profiling process⇒ easy access for adjustment and serviceMobile, two fixed and two swivel castors with brakes230 V motor with frequency converter for continuously...