Lucas #6600 Universal Sealant is a high performance, multipurpose thermoplastic elastomer based sealant. Excellent adhesion to most surfaces including: metal, Kynar®, asphalt, shingles, modified bitumen, EPDM, TPO, Elvaloy/PVC, Hypalon, vinyl, fiber cement, wood, concrete, tile, masonry, glass. #6600 is available in clear, black, white and various colors (see reverse). Ideal for residential roofing applications where appearance is important.
Surface to be sealed must be clean. Porous surfaces may be primed with Lucas #5015 prior to application of this product. To use, cut tip to size and puncture seal. Maximum recommended joint depth is 3/8 inch. Use backer rod for deep joints. Please read the most current Lucas Product Data Bulletin and MSDS for this product prior to use. May be painted. Some paints may require up to one week cure time before application. Keep product warm prior to use.
Flammable mixture, keep away from heat and open flames. Avoid prolonged contact with skin or fumes. For outdoor use only. If irritation occurs seek medical attention. Do not use near heat or open flame. Keep out of reach of children. Read MSDS prior to use.
Specification:
ASTM C-920, Type S, Grade NS, Class 25, Use NT, except for weight loss.
Fed Spec TT-S-00230c, Class A, Type II
Recommended rate of application See Application
% Solids by Volume 67 min
% Non-volatile 75 max
Elongation ASTM D-412 1000% @ 77°F (25°C)
Tensile Strength 400 psi min
Adhesion ASTM C-794
Shingle: 19 pli
TPO: 10 pli
PVC/KEE: 13 pli
Cement/Mortar: 20 pli
Aluminum: 25 pli
Steel: 12 pli
Kynar®: 19 pli
Wood: 22 pli
VOC: <250 g/l
Flash Point (TCC): +51°F (38.7°C)
Container Sizes: 10 oz. tubes
Standard Colors: Clear, White, Black, Aluminum