Ivy Classic 36034 - Roofers Carbide Circular Saw Blade, 7-1/4 in., 14 Teeth

Built for demolition-grade roofing work, the 36034 chews through plywood/OSB decking and nail-embedded lumber with confident, straight tracking. Its coarse 14-tooth grind and deep gullets move chips fast, while tough carbide tips shrug off nails and stay sharp longer—perfect for tear-offs, re-sheeting, and framing on harsh jobsites.

Key Features

• 7-1/4" diameter, 14T configuration for fast, aggressive cuts in decking and nail-embedded wood.
• Heavy-duty carbide-tipped teeth deliver extended edge life and reduced downtime between blade changes.
• Deep, open gullets enhance chip ejection to help prevent binding and heat buildup during long rips.
• Optimized tooth geometry supports straight tracking and controlled feed on circular saws.
• Hardened steel body resists warping; designed for high-torque jobsite saws.
• Multipurpose roofing/framing use: tear-offs, sheathing cuts, rough framing, and deck replacement.

Brand / Model: Ivy Classic 36034

Product Type: Circular saw blade for roofing/demo (nail-embedded wood)

Weight: ~0.7–0.9 lb (blade only; approximate)

Dimensions (Diameter): 7-1/4 in (184 mm)

Dimensions (Kerf): ~0.071–0.087 in (1.8–2.2 mm) typical roofing/demo blade

Arbor Size: 5/8 in (15.88 mm)

Tooth Count: 14T (coarse, fast-cut)

Material (Body): Hardened alloy steel

Material (Tips): Carbide-tipped teeth

Tooth Grind / Geometry: Demo-oriented carbide grind with deep gullets for chip ejection

Hook / Rake Angle: Positive, aggressive (fast feed; typical for roofing/framing)

Max RPM: Up to ~8,000 RPM (check saw rating; use lower of tool/blade ratings)

Cutting Applications: Plywood/OSB sheathing, nail-embedded lumber, rough framing, tear-offs/re-sheeting

Feed Style: Fast, aggressive cutting; straight tracking on handheld circular saws

Compatibility: Fits standard 7-1/4 in circular saws with 5/8 in arbor (verify guard/clearance)

Usage Notes: Always wear eye/hand protection; confirm blade tightness and correct rotation; avoid side-loading

Included: One 7-1/4 in, 14T carbide-tipped circular saw blade

Q: What materials is this blade designed to cut?
A: Plywood/OSB sheathing, nail-embedded lumber, and rough framing materials—ideal for roofing tear-offs and re-sheeting.

Q: Can it handle nails without chipping immediately?
A: Yes—carbide-tipped teeth are built for occasional nail strikes in demo/roofing work, but always inspect teeth and replace when dull or damaged.

Q: Will it fit my circular saw?
A: It’s a 7-1/4" blade with a 5/8" arbor, compatible with most handheld circular saws—confirm your saw’s arbor size and guard clearance.

Q: Any usage or safety tips to get the best life?
A: Let the saw reach full speed, maintain a steady feed, avoid side-loading/binding, and wear PPE. Replace the blade if teeth are missing, chipped, or the cut quality degrades.