Everhard MR05110 - 2 in. x 4 in. Silicone Roller

The MR05110 combines a wide, non-marring silicone wheel with a rugged offset frame to deliver smooth, even pressure across long seams, laps, and transitions. Built for hot-air welding and detail work on single-ply membranes, it tracks straight without scuffing, helping you achieve strong, uniform adhesion with fewer passes and less fatigue.

Key Features

• 2″ diameter × 4″ wide silicone roller for broad coverage and consistent compression on long runs
• Non-marring, heat- and solvent-resistant silicone ideal for TPO, PVC, EPDM, and similar membranes
• Offset steel frame keeps hardware clear of the contact path for precise tracking near edges and details
• Enclosed precision bearings for smooth rolling and long service life
• 5″ ergonomic (soft-grip) handle with knuckle clearance for comfortable control
• Jobsite-ready construction designed to withstand daily professional use
• Made in the USA quality consistent with Everhard’s professional standards

Roller Diameter: 2″ (50.8 mm)

Roller Width: 4″ (101.6 mm)

Roller Material: Non-marring, heat/solvent-resistant silicone

Frame/Fork: Offset single-fork steel frame for clear tracking

Bearings: Enclosed precision ball bearings

Handle: 5″ soft-grip (cushion) handle with knuckle clearance

Overall Length (approx.): ~9″

Weight (approx.): ~1.55 lb (0.70 kg)

Origin: Made in USA

• Hold the wood handle firmly while ensuring the roller spins freely.
• Set the silicone roller against the membrane seam or surface to be pressed.
• Roll forward steadily with even pressure to embed the seam or bond adhesive.
• Roll backward if needed to reinforce adhesion or eliminate gaps.
• Use this roller during hot-air welding since silicone resists sticking.
• After use, wipe away any adhesive or debris from the roller surface.
• Store the roller in a dry, protected place to preserve its silicone and bearings.

Q: What is the MR05110 used for?
A: Applying smooth, even, non-marring pressure along long seams, laps, and transitions on single-ply membranes (TPO, PVC, EPDM), during or after hot-air welding.

Q: What are the size and materials?
A: The roller is 2″ diameter × 4″ wide, made of heat/solvent-resistant silicone, with an offset steel frame, enclosed precision bearings, and a 5″ soft-grip handle.

Q: Why choose a silicone roller instead of steel for this application?
A: Silicone resists heat and common roofing cleaners/solvents and won’t scuff finished membranes, making it ideal where a steel roller might leave marks.

Q: What are the weight and overall length?
A: The tool weighs about 1.55 lb (0.70 kg) and is approximately 9″ in overall length.