Everhard MR05240 - 2 in. x 2 in. Silicone Roller

The MR05240 pairs a wide, non-marring silicone wheel with a rugged offset frame to deliver smooth, even pressure across laps, seams, and transitions. Built for hot-air welding work on TPO, PVC, EPDM, and similar membranes, it tracks cleanly without leaving scuffs, helping you achieve strong, uniform adhesion over longer runs and detail areas alike.

Key Features

• 2" diameter x 2" wide silicone roller for broad, consistent pressure and faster coverage
• Non-marring, heat- and solvent-resistant silicone ideal for single-ply roofing membranes
• Offset steel frame keeps hardware clear of the contact path for precise tracking
• Enclosed precision bearings for smooth rolling and long service life
• 5" ergonomic (soft-grip) handle with knuckle clearance for comfort and control
• Jobsite-ready construction designed for daily professional use
• Made in the USA quality consistent with Everhard’s professional standards

Roller Diameter: 2″ (50.8 mm)

Roller Width: 2″ (50.8 mm)

Roller Material: Non-marring, heat/solvent-resistant silicone

Frame/Fork: Offset single-fork steel frame for clear tracking

Bearings: Enclosed precision ball bearings

Handle: 5″ soft-grip (cushion) handle with knuckle clearance

Overall Length (approx.): ~8.5″

Weight (approx.): ~0.95 lb (0.43 kg)

Origin: Made in USA

• Grip the 5″ wood handle firmly so the roller spins freely without slippage.
• Position the silicone roller on the membrane seam you want to press.
• Roll along the seam with steady pressure to consolidate the seam or adhesive.
• Reverse direction and roll backward if needed to ensure full adhesion.
• The silicone surface helps resist sticking during hot-air welding applications.
• After use, wipe away any adhesive or debris from the roller surface.
• Store the roller in a dry, protected place to preserve the silicone and bearings.

Q: What is the MR05240 used for?
A: Applying smooth, even, non-marring pressure on single-ply roofing seams and transitions (TPO, PVC, EPDM), especially during or after hot-air welding.

Q: Why choose a silicone roller instead of steel?
A: Silicone resists heat and common roofing solvents and won’t scuff finished membranes, making it ideal where a steel roller might leave marks.

Q: What are the key specs?
A: 2″ diameter × 2″ width silicone wheel, enclosed precision bearings, offset steel frame, 5″ soft-grip handle, overall length ~8.5″, weight ~0.95 lb (0.43 kg).

Q: Any tips for best results and care?
A: Use steady, even passes rather than force; keep the wheel and bearings clean; wipe with mild cleaner after use; store dry and avoid harsh petroleum solvents.