Everhard MR02040 - 2 in. x 2 in. Double Fork Radius Roller

Engineered for stability and smooth tracking, the MR02040 pairs a 2″ × 2″ polished, radius-edge steel wheel with a rigid double-fork frame. The radius profile helps the roller glide over laps, step-downs, and transitions without leaving sharp track lines, while the twin-fork design keeps the axle square under pressure for consistent, even compression. With enclosed bearings and a comfortable 5″ handle, it delivers reliable, repeatable results on TPO, PVC, and EPDM seams—day after day.

Key Features

• 2″ diameter × 2″ wide polished steel radius roller minimizes edge/track marks on membranes
• Double-fork steel frame provides balanced support on both sides of the wheel to reduce wobble and improve control
• Enclosed precision bearings for smooth rolling and long service life
• 5″ hardwood handle offers a solid, familiar grip and clear knuckle clearance near edges and walls
• Balanced weight helps apply firm, uniform pressure on long runs and detail areas
• Jobsite-ready construction built to withstand daily professional roofing use
• Made in the USA to Everhard’s professional standards

Roller Diameter: 2″ (50.8 mm)

Roller Width: 2″ (50.8 mm)

Roller Profile: Radius (rounded edges to minimize track/edge marks)

Roller Material: Polished solid steel

Frame/Fork: Heavy-duty double-fork steel frame for stable, square axle support

Bearings: Enclosed precision ball bearings for smooth, long-life operation

Handle: 5″ hardwood handle with clear knuckle clearance

Overall Length (approx.): ~8.5″

Weight (approx.): ~2.0 lb (0.91 kg)

Origin: Made in USA

• Hold the handle firmly so you maintain control and the roller spins freely.
• Position the steel roller over the seam or surface you wish to press.
• Roll forward using steady, even pressure to consolidate the seam.
• Roll back if needed over the same path to reinforce adhesion.
• Ensure the roller stays aligned and doesn’t wander off the intended path.
• After use, wipe off any adhesive, residue, or debris from the roller.
• Store the roller in a clean, dry place to protect both roller and bearings.

Q: What is the MR02040 designed for?
A: Applying firm, even pressure on single-ply seams (TPO, PVC, EPDM) and transitions. The radius-edge steel wheel helps minimize sharp track marks over laps and step-downs.

Q: What are the key size, materials, and weight?
A: The roller is 2″ diameter × 2″ wide, polished solid steel on a heavy-duty double-fork steel frame with enclosed bearings and a 5″ hardwood handle; it weighs about 2.0 lb (0.91 kg).

Q: Why choose a double-fork radius roller?
A: The double-fork keeps the axle square under load for smoother tracking and balanced pressure, while the radius profile reduces edge lines for a cleaner finish.

Q: Any usage and care tips?
A: Make steady, even passes; avoid striking fasteners; keep the wheel and bearings clean; and store the tool dry to maximize service life.