Everhard MR05020 - 1 3/4 in. x 1 3/8 in. Silicone Roller

Built for clean, controlled pressure in tight detail areas, the MR05020 pairs a compact silicone roller with a durable frame to deliver uniform, non-marring results on single-ply membranes and flashing. Its smaller width excels along seams, upstands, and corners, while the smooth-rolling bearings help you track straight lines without chatter or scuffing.

Key Features

• Non-marring silicone roller — resists heat and common roofing solvents while protecting finished surfaces.
• Compact size for detail work — 1-3/4″ diameter × 1-3/8″ width gives precise control in tight spots, around penetrations, and along edges.
• Smooth, consistent rolling — precision/enclosed bearings help maintain even pressure and straight tracking.
• Single-fork steel frame (offset) — keeps hardware clear of the contact path for clean, consistent contact.
• Comfortable 5″ handle with knuckle clearance — secure grip for long runs and vertical work.
• Jobsite-ready build — rugged construction for daily professional use.
• Made in the USA — manufactured to Everhard’s professional standards.

Model: MR05020.

Roller material: Heat-resistant silicone (60 durometer).

Roller size: 1-7/16″ diameter × 1-3/4″ width (≈ 36.5 mm × 44.5 mm).  

Handle: 5″ wood handle, single fork frame. 

Weight: ≈ 0.52 lb (0.24 kg) per roller. (Everhard lists 0.52 lb on its roofing site.) 

Package quantity: 12 per case. 

UPC: 095412050200.

• Hold the wood handle firmly so the roller spins freely.
• Place the silicone roller against the membrane seam where bonding is needed.
• Roll along the seam with steady pressure to embed the seam or adhesive.
• Re-roll in reverse if necessary to ensure full adhesion.
• Use during hot-air welding applications; the silicone resists sticking to hot tools.
• Wipe off any adhesive, debris, or residue after use.
• Store the roller in a dry, protected area to preserve the silicone and bearings.

Q: What is the MR05020 used for?
A: Applying smooth, non-marring pressure to single-ply roofing seams and flashing details—ideal around edges, penetrations, and tight corners.

Q: What are the roller’s size and material?
A: It uses a heat-resistant silicone roller (about 60 durometer), sized approximately 1-7/16 in diameter × 1-3/4 in width, on a single-fork steel frame with a 5 in wood handle.

Q: Will silicone scuff or react with membranes or cleaners?
A: Silicone is non-marring and resists common roofing solvents. Wipe clean after use with a mild cleaner; avoid harsh petroleum solvents that could degrade materials over time.

Q: Any tips for best results and care?
A: Use steady, even pressure and multiple passes rather than force. Keep bearings clean, inspect the roller for nicks, and store the tool dry away from direct heat sources