Shingle Roofing Roof Brackets

The ACRO 26906 Roof Bracket is a contractor-grade support bracket set at a 90° angle, equipped with a 16″ back plate for use with structurally sound 2×6 lumber planks. Designed for safety and durability, it includes four offset nail slots—exceeding OSHA’s requirement—to prevent upward movement, a robust back-stiffening rib to resist twisting and flexing, and smooth, rounded edges to protect hands and roof surfaces. The powder-coated safety-yellow finish improves visibility and holds up under...

The ACRO 19700 Johnny Jack Offset Roof Bracket is a specialized staging solution for steep-pitch roofing installations involving interlocking materials such as slate, tile, metal shingles, and asphalt. Featuring a 7‑foot flat bar that offsets the walking surface from the attachment point, it delivers a safe, accessible work platform with 5½‑in surface clearance—keeping anchor screws exposed and reachable. The system folds compactly to 48″ for convenient transport and storage, and its...

This adjustable slaters bracket offers six locking positions and a 10" platform. It is built from heavy-duty galvanized steel and can be repositioned and taken down without damaging shingles. The bracket folds flat for transport and features a replaceable 3-position tongue. Key features: 6-position locking adjustments Heavy-duty galvanized steel construction 10" platform Folds flat for storage and transport Replaceable 3-position tongue ...

The ACRO 26606 Roof Bracket is a contractor-grade support bracket set at a 60° angle, featuring a 16-inch back plate optimized for use with structurally sound 2×6 lumber planks. It is engineered with four offset nail slots, surpassing OSHA’s three-slot minimum, providing resistance against upward shift. The bracket includes six long welds and a back-stiffening rib to resist twisting and flexing, plus smooth rounded edges that protect hands and roofing surfaces. Its durable powder-coated safety...

The ACRO 26904 Roof Bracket is a contractor-grade, 90° support bracket with a 16-inch back plate, designed specifically for use with structurally sound 2×4 lumber planks for roofing staging. It includes four offset nail slots—exceeding OSHA’s requirement for three—to prevent upward slipping, six extended welds and a back-stiffening rib to resist twisting or flexing, and a welded gusset for added strength. Finished with smooth, rounded edges to protect hands and roofing surfaces, and...

The ACRO 26456 Roof Bracket is a contractor-grade, 45∘ angled support bracket with a 16" back plate, designed for use with sound 2×4 or 2×6 lumber scaffolding planks. It enhances safety with four offset nail slots—a number that exceeds OSHA’s requirement of three—to prevent upward sliding. For structural integrity, the bracket features six long welds and a back-stiffening rib to resist twisting and flexing under load. Its smooth, rounded edges are specifically designed to protect both the...

The ACRO 29606 Roof Bracket is a rugged, contractor-grade support designed at a 60° angle with a generous 19″ back plate tailored for use with structurally sound 2×6 lumber. It exceeds OSHA safety standards with its four offset nail slots to prevent upward slippage, supplemented by six long welds, a back-stiffening rib, and welded gusset to reinforce structural integrity. With rounded, smooth edges that protect both hands and roofing materials and a high-visibility, powder-coated safety-yellow...

The ACRO 29456 Roof Bracket is a robust, contractor-grade 90° support bracket with a 19-inch back plate, designed for use with structurally sound 2×4 lumber. It features four offset nail slots—exceeding OSHA’s minimum requirement—plus a welded gusset and back-stiffening rib to resist twisting and flexing. With smooth, rounded edges to protect hands and roofing surfaces and a powder-coated safety-yellow finish for visibility and durability, this bracket installs and removes cleanly without...

The RACE Adjustable Roof Bracket is a steel staging bracket with a 10-inch platform and selectable angles of 30°, 45°, 60°, or 90°. It supports one worker per 8 feet of bracket spacing or up to 250 pounds of materials. The bracket must be nailed securely to roof rafters using all mounting slots for proper installation. Key features: 10" platform with adjustable angle settings Four positions: 30°, 45°, 60°, 90° Steel construction for durability Rated for one worker or up to 250 lbs of material...

The ACRO 29608 Roof Bracket is a contractor-grade, 60° angled support bracket with a generous 19″ back plate, specifically designed for use with structurally sound 2×8 lumber planks. It includes four OSHA-compliant offset nail slots to prevent upward slippage, reinforced with six long welds, a back-stiffening rib, and a welded gusset to provide exceptional strength and resistance to twisting or bending. The bracket’s smooth, rounded edges protect hands and roofing materials, and its...

The ACRO 29908 Roof Bracket is a contractor-grade support bracket set at a 90° angle, featuring an extended 19″ back plate designed for structurally sound 2×8 lumber planks. It includes four offset nail slots—surpassing OSHA’s minimum specification—for secure attachment. Built for robustness, it incorporates a back-stiffening rib and welded gusset to resist twisting and flexing. Smooth, rounded edges safeguard hands and roofing surfaces while allowing shingle-safe installation and removal. The...

The ACRO 2″ × 10″ 90° Roof Bracket with 19″ back length is a heavy-duty, contractor-grade staging support designed to hold structurally sound 2×10 lumber planks. It exceeds OSHA standards with four offset nail slots that prevent upward slippage and is reinforced with a back-stiffening rib, six long welds, and a welded gusset for maximum strength. Smooth, rounded edges protect both workers and roofing materials, while the safety-yellow powder-coated finish ensures high visibility and resistance...

The ACRO 29904 Roof Bracket is a contractor-grade 90° support bracket with a 19″ back plate designed for use with structurally sound 2×4 lumber planks. It includes four offset nail slots that exceed OSHA’s three-slot requirement, ensuring secure placement and preventing upward slippage. Reinforced with six long welds and a back-stiffening rib, the bracket resists twisting and flexing while maintaining structural integrity. Smooth, rounded edges protect roofing surfaces and workers’ hands,...

The RACE Fixed Roof Bracket is a rigid scaffold bracket designed to mount perpendicular (90°) to the roof surface for staging and slide guard use. It is intended for roofs with pitches between 4/12 and 6/12 and must be spaced no more than 8 feet apart when used as part of a slide guard system. The bracket is built for experienced tradesmen and requires appropriate fall protection and compliance with OSHA standards for use. Key features: Fixed 90° orientation to roof surface Designed for slide...

The ACRO 29451 Roof Bracket is a contractor-grade, 19-inch heavy-duty support bracket set at a 45° angle, designed for use with solid 2×10 planks to create safe staging on pitched roofs. It features four offset nail slots—compliant with OSHA safety standards—six long welds for structural strength, a back-stiffening rib to resist twisting and flexing, and a welded gusset on the back panel for added durability. Finished with rounded edges and corners to prevent hand injuries or damage to work...

The ACRO 29458 Roof Bracket is a rugged, contractor-grade 19-inch support bracket set at a 45° angle, designed specifically for use with structurally sound 2×8 planks to form stable staging on pitched roofs. It includes four offset nail slots (surpassing OSHA’s requirement of three) to prevent upward slipping, six extended welds for enhanced strength, a back-stiffening rib to resist twisting and flexing, and a welded gusset for long-term durability. Featuring smooth, rounded edges to protect...

The RACE Fixed Roof Bracket is a rigid scaffold bracket configured at a 45° angle, suited for use on steep (12/12 pitch) roofs. It is rated to support one worker and a load of materials in compliance with staging guidelines. The bracket features rounded corners to minimize shingle damage and requires experienced handling and adherence to fall protection rules. Key features: Fixed 45° orientation for steep roof (12/12 pitch) use Rounded corners to reduce shingle damage Rated for one worker plus...