Freund

The Freund Perfect Bender S-150 makes bending sheet metal to a true 90° easy and fast. Bends steel, copper, zinc, aluminum metal sheets. The Freund Perfect Bender S-150 makes bending sheet metal to a true 90° easy and fast. Using the Perfect Bender S-150 is simple. Just a loosen the carriage clamping bolt and slide it to the appropriate laser etched mark on the stainless steel rod to set the bending point. Next slide the S-150 over the edge of the sheet metal and then roll it back and forth...

Freund Disc Roller S-Model makes bending sheet metal by starting with a 90° bend and continues the bend around to any angle. The Freund Disc Roller S-Model makes bending sheet metal a breeze! The S-Model starts with a 90° bend (made with any rolling edge bender) and continues the bend around to any angle between 90° and 180° by simply rolling the tool back and forth along the sheet metal while applying pressure to bend it over. Features: Aluminum housingStainless steel working parts and...

Freund Tools Hand Notcher 35 is perfect for cutting straight, parallel incisions in sheet metal up to 22ga thick. The notching cut length of 1-3/8″ enables long uninterrupted cuts. Easily cut through Copper, Steel, Zinc, and more! Freund Hand Notcher is a very useful tool for notching panels at the eaves end before hemmingFor straight / parallel cuts. ie. square seam folding on wall connection edgesCan be used to make continuous cutsMax depth of notch is 1-1/4″Notches 24ga steel with ease –...

Scribe trim lines on sheet metal quickly and accurately.22 pre-set scribing depths from 1/8” to 4-3/4”Each scribing depth size features a dual edged point to create clean; readable and accurate score lines parallel to the edge of the metal sheet.Stainless steel with etched-in dimensions.This is a great time saving tool, for all sheet metal trades.Useful for making engraved marks on the material for bending or soldering purposes. The Freund Scribe is perfect for quick marking of sheet...

Freund Tinman’s PVC Sheet Metal Mallets is perfect for old-world sheet metal crafting. Features:Milled PVC striking surfaces.Made in GermanyHammer offers PVC head and is fitted with a Hickory wood, ergonomic handleLightweight but strong, all purpose metal working hammerEdged end of hammerhead can be used for corner workWill not mar the metal ...

The iron comes with a medium copper turbo tip. This soldering iron is ultra-light and ultra-strong, and this is our most popular Express soldering kit. The innovative ergonomic handle offers a convenient thumb controlled on and off switch, plus a push-button igniter with up to 50,000 quick starts. Made in France. The Express soldering iron is used for soldering zinc, copper, and stainless steel. It has a swivel hose attachment and a 70-second start-up time. The iron length is 11 5/8". Iron...

This handy kit includes the famous Perkeo Heavy Duty Soldering Iron and just about everything you need to get started.All you need to provide is a propane cylinder, pressure regulator, solder flux and solder.The kit includes: Perkeo Heavy Duty Soldering Iron with Medium TipAdditional Medium TipHose adapterQuick Hose Connect12′ HosePerkeo StandPerkeo Wind ProtectorAdapter Fitting (Iron to Quick Connect)Handy Carrying Case18x6x6 in. IMPORTANT:This kit does not include a pressure regulator. The...

Freund forged welt iron seamers are traditional metal roof seam forming tools. Available in several designs including flat blade “scraper” models and an angle model for working tight corners. This flat scraper has a forged, long blade.The prism is 1 inch x 1 inch, slightly slanted, and 1/4 of an inch drilled.Made in Germany.It is 11 1/2 inches long by 5 1/2 inches wide.

The Perkeo heavy-duty propane soldering iron is a technically sophisticated quality product that is made from the finest materials such as stainless steel, solid brass and indestructible teflon. Exceptionally durable, low maintenance and easy to operate, this tool is ideal for everyday use. It goes on working well despite moisture, soldering chemicals or the toughest jobs. This is a tool you can really depend on!With the standard 350g tip, the Perkeo soldering iron is at operating temperature...

Stainless steel. Compound leverage for stainless steel sheetsHRc 58-60, bicomponent grip

Stainless steel.Compound leverage for stainless steel sheetsHRc 58-60,bicomponent grip

Stainless steel.Compound leverage for stainless steel sheetsHRc 58-60,bicomponent grip

The Freund Pocket Pan Former features a 6″ folding depth.The Freund Pocket Pan Former is used to create pig-ears in sheet metal for various transitions. Great for bending heavier metal.Made from steel and good for bending heavier gauge material6” depth is advantageous over standard pliersEasily create ”pigs ear” in sheet metal for roof pitch transitionsForged, long blade, prism 25 x 25 mm slightly slanted, 5 mm drilledUsed to create pig-ears in sheet metal for various transitions ...

Universal supporter: Creates double standing seams or single standing seams and also cuts the old seam perfectly – all this with only one handy device!The new folding machine Seaming Pro offers 3 functions in only one device! It makes no difference whether you are working on the roof or on the facade; our Seaming Pro always provides the highest level of comfort and a noticeable facilitation in sheet metal processing.1 Device for 3 ApplicationsCreation of double standing seams - in just one...

Freund Slater's Hammer, British Design: made for right handed (#00050000) or left handed (#00051000) use. Imported from Germany: fully heat-treated and polished, and fitted with an all leather bell-style grip. The nail puller is conveniently double-slotted on the side of the claw, and the square checkered hammer face offers sharp corners. Beveled shank for cutting slates on either side of the hammer. FEATURES: Pull nails with the key hole, punch holes with the point, drive in nails, and you...

Freund Slater's Hammer, British Design: made for right handed (#00050000) or left handed (#00051000) use. Imported from Germany: fully heat-treated and polished, and fitted with an all leather bell-style grip. The nail puller is conveniently double-slotted on the side of the claw, and the square checkered hammer face offers sharp corners. Beveled shank for cutting slates on either side of the hammer. FEATURES: Nail PullerHand ForgedLeather HandlePolished FinishPoint Protection ...

Heavy handle with recessed grip, stainless steel blade with rounded edges, flexible spring tempered blade is easily replaced by means of two special screws, spezial holder suitable for all blade lenghts, delivery complete including assembly wrench for quick change of the blade Straight handleStraight, heavy handle with recessed gripStainless steel blade with rounded edgesFlexible spring tempered blade is easily replaced by two special screwsSpecial holder suitable for all blade lengthsSlate...

Need a handheld tool for slate repair and shaping work? The Freund Ergo-Cut slate snips tool fit in your tool pouch and reliably cut all natural slate and fiber cement products up to 1/4″ in thickness. The Ergo-Cut slate snip is available with or without a built-in hole punch. Slate cutter, asbestos-cement and fibre-cement made out of high quality aluminium, ergonomic, light weight, with punching device.

Need a handheld tool for slate repair and shaping work? The Freund Ergo-Cut slate snips tool fit in your tool pouch and reliably cut all natural slate and fiber cement products up to 1/4″ in thickness. The Ergo-Cut slate snip is available with or without a built-in hole punch. For asbestos-cement and fibre-cementA manual cutter for all kinds of slate and asbestos-cement up to a thickness of 7 mm. Ergonomically formed for an easy and fatigue-proof working. Changing blades not necessary. ...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal The Freund Disk Bender is used to continue the bend from 90° to as much as 180° to create beautiful hems on curved flashings! The bend dimension is based on the depth of the 90 degree bend provided. Bends inside and outside radii [36″ radius is nominal, but can be made tighter depending on type of material]The Disk Bender self aligns to the previous bend [3/8″ minimum] up to 1-5/8″Bends copper, zinc, aluminum up to .032″ and...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal Think of the Freund Tools Disk Rollers as a hemming tools. Once you’ve pre-bent your sheet metal to 90 degrees with a Single Edge Roller or Double Edge Roller, the Freund Disk bender quickly and easily continues the bend over to about 180 degrees to create a crisp and clean hem. Maximum Bending Depth of 1-5/8″. Bends aluminum, copper zinc and steel up to .032″. Bends from 90° profiles to maximum 180°Bending height:...

For Edging Curved Sheet Metal and Producing Tight Radii Freund 91630000 Radius Roller 25 Edge Bender bends inside and outside radiuses, infinitely adjustable bend height from 0.2″ to 0.98″. Freund 91630000 Radius Roller 25 Edge Bender Bends inside and outside radiuses [36″ radius is nominal, but can be made tighter depending on type of material]Infinitely adjustable bend height from 0.2″ to 0.98″Bends copper, zinc, aluminum up to .032″ and steel up to 22gaEasy to read scale with both inches...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet Metal Standard Single Edge Benders feature an easy-to-read scale (mm + inch), loops to hang from work belt and are designed primarily for straight bends, though the Single Edge Roller will do gentle outside radii. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper, .032″ Aluminum Easily legible mm scale, eyelet for the tool belt, edge height 5 - 200 mm, also suitable for small radii Leading:...

Mobile Edge Rolling Machine for the Edging and Bending of Sheet MetalStandard Double Edge Rollers feature an easy-to-read scale. The Double Edge Roller should be your first choice for very long straight bends. Standard Double Edge Rollers feature an easy-to-read scale (mm + inch). The Double Edge Roller should be your first choice for very long straight bends; the double rollers make the bending faster. Infinitely adjustable. Bending height: 1/4″ to 7-7/8″. Capacity: 22ga steel, 24oz copper,...