SafePro 30 in. x 30 in. Roof Hatch Safety Rails

  • SafePro 30 in. x 30 in. Roof Hatch Safety Rails - SPS-3030
  • SafePro 30 in. x 30 in. Roof Hatch Safety Rails - SPS-3030
  • SafePro 30 in. x 30 in. Roof Hatch Safety Rails - SPS-3030

Price Includes Shipping to a Commercial Address

Residential deliveries are subject to a $250 limited access fee
Best Price Guaranteed
Price: $1,395.00
    Item #SPS-3030
    Write a review!

    Description

    SafePro's Roof Hatch Safety Rail and Ladder Extension is a 4-sided rail system with ergonomic hand grip side rails, a self closing gate with no pinch hinges, and integrated ladder extension rails that will hold steady in the event of a slip during ladder use and comply with OSHA standards.



    Structurally, SafePro’s steel system is the strongest rail on the market, with the load tested to over 1000 pounds. The rails are powder coated smooth with no joints or fittings to snag clothing, as well as no chains or latches to operate. Installation is even simple, with only 4 rail pieces and 10 bolts.



    Key Points :

  • OSHA / CAL-OSHA compliant
  • Self-closing /climb-assist gate
  • Rigid 360° powder-coated steel rails
  • No risk to existing roof warranty (Does not penetrate flashing)
  • Ergonomic, patent-pending design
  • Simple to install with any size hatch (4 rail pieces)
  • Easily Upgradeable to RiskPro High Risk Hatch Safety Solution
  • 20 Year Warranty

    • Benefits

    Customer Benefits :

  • Immediate OSHA compliance
  • OSHA fine avoidance (up to $250,000)
  • Decreased risk
  • Improved safety

    • Facts

    Compliance Facts: Are You At Risk?

  • OSHA §1910.23 and Cal-OSHA §3212 require that any hatch, hinged and/or has ladder access, must have either a permanent or removable safety rail. (Fines up to $250k)
  • Buildings not compliant with OSHA 1910.23 risk purchasers devaluing the property significantly, with replacement or refit of EACH non-complying roof hatch and/or skylight easily exceeding $100,000.
  • The #2 cause of work-related injuries, falls from 11+ feet also have a 50% survival rate. Building owners & architects risk litigation settlements averaging $4.2 MILLION for a fatal fall, as well as criminal/civil prosecution.

    • Materials

    Mounting System : Integrated stanchions, no fittings. Mounting holes pre-drilled for 3/8" diameter through bolts. Rail is mounted to extended cap flashing hols per SafePro installation instructions.


    Tubing : 1-1/2" OD .083 wall powder-coatded steel.


    Finish : Powder-coated safety yellow or hot dipped galvanized steel


    Gate System : Gravity self-closing, non-collapsible full wrap-around 1-1/2" tubing grab hold (welded - no fittings). Heavy duty hinges with 5/8" hinge pin with built-in pinch-less gate stops and pull up full opening positioning. Wraps around forward integrated protruding ergonomic hand grip integrated stanchions. Hinged on left side - standard.


    Back Cross Support Rail : Standard equipment 1-1/2" steel tubing smooth saddle joint bolt-on with 3/8" x 3" bolts and 3/8" tubing connector nuts. ASTM 316 SS.


    Tube Terminal End Plugs : UV-Resistant low density polyethylene (LDPE). Head diameter 1-1/2" plug length 0.511", fits cleanly at tube ends keeping out water, pests, and debris.


    Bolts and Washers : ASTM 316 grade stainless steel hex bolts 3/8" x 2-1/2", nylon locking hex nut, flat washers for counter flashing and outside mounting rail. NOTE : 316 grade stainless steel (marine grade) offers the highest corrosion resistance available for construction fasteners in or near salt water; recommended within 5 land miles of any salt water body. MIL NAS military grade available upon request.


    Labels : Safety warnings, manufacturer's identification including patents pending and/or patent numbers. Made in the United States.

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    SafePro 3096 - Roof Hatch Safety Rail, 30" x 96"
    Meets and exceeds OSHA standard CFR29 1910.23 and CFW29 1910.27.
    Price: $2,642.75
    Availability: In Stock
    Usually ships within 1-2 Business Days

      SafePro's Roof Hatch Safety Rail and Ladder Extension is a 4-sided rail system with ergonomic hand grip side rails, a self closing gate with no pinch hinges, and integrated ladder extension rails that will hold steady in the event of a slip during ladder use and comply with OSHA standards. Structurally, SafePro’s steel system is the strongest rail on the market, with the load tested to over 1000 pounds. The rails are powder coated smooth with no joints or fittings to snag clothing, as well as...

      New!
      SafePro - Automatic Roof Hatch Opener
      automatically open, close, lock, and unlock
      Price: $2,210.00
      Availability: In Stock
      Usually ships within 1-2 Business Days

        Automatic Roof Hatch Opener Standard Options: 110V by SafeProTM provides fall protection by unlocking/locking and lifting the hatch lid from the safety of ground level providing a safe ladder climb and egress/ingress through the roof opening by a push button closure of hatch lid, eliminating open hole violations per OSHA Regulation 1910.29.Fit: Fits all brands and a variety of roof hatch sizes with a hatchway hinge lid.Type of Installation: New or retrofit...

        Contact

        330 Meyer Road
        Bensenville, Illinois 60106

        © 2024 Big Rock Supply
        Leave a message