Price: $199.95
Item #CHE-F1428
Write a review!
Quantity:
Description
1-Part is a moisture curing, pourable sealant designed for use in pitch pans and warranted chem curb penetrations seal, suitable in damp, dry, or cold climates. Part-1 is solvent free, contains no Isocyanates and will not shrink upon curing. Can not " out gas" or bubble on damp surfaces as urathane sealants often do. 1-part has resilient "elastomeric" properties and excellent adhesion to most construction materials. It can be used effectively in many difficult construction site conditions and cures in wet or dry climate conditions and at low temperature (32 degrees F / 0 degrees C). 1-Part's low durometer accommodates greater movement in penetration seal than typical urethane sealants.
Advantages
- Solvent free, 100% solids will not shrink
- 20 minute skin over
- no outgassing on damp surfaces
- Good UV stability, will not suntan
- Paintable within 24 hrs. (see limitations)
- Self-leveling, no special tools or mixing required
- Applications at temps as low as 32 degrees F ( 0 degrees C)
Compatible Substrates
Single Ply MembranesAPP with gran. targetTPO with TPO PrimerSBS Mod Bit / BURPVC / PIBAsphalt
Colors: Gray
CASE OF 24
Installation
INSTALLATION
Bonding surfaces should be clean, dry and free from all contamination that may inhibit the sealant’s performance. Brush away all gravel or loose granules. Isopropyl alcohol is an effective cleaner for surface preparation. Do not extend 1-Part with foreign materials or liquids. The seal surface will skin over and will be water tight in approximately 1 hour. Do not use if rain is anticipated within 4 hours. Please contact customer service for application guidelines with temperatures below 32°F (0°C). Do not use on TPO without the use of TPO primer. Do not use on Hypalon. Smooth APP membranes require a granulated target. This product sets rapidly upon exposure to moisture.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
ChemLink, #F1263 DuraLink 35 Sealant White 10.1oz...
DuraLink 35 Sealant White 10.1oz
Price: $189.95
Availability: In Stock
Usually ships within 1-2 Business Days
F1263 ChemLink DuraLink 35 Multi-Purpose Sealant White 10.1oz Cartridge. ChemLink DuraLink 35 is a multi-purpose, moisture cure, elastomeric sealant that combines economy and high performance. DuraLink 35 has excellent elastomeric properties which is ideal for a wide range of applications including difficult surfaces such as Kynar 500%u00AE PVDF and other anodized metals and coatings. DuraLink 35 is isocyanate free, paintable and SWRI validated for %u00B1 35% joint movement.Bonds to Kynar...
![]()
New!
Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
Price: $160.15
Availability: In Stock
Usually ships within 1-2 Business Days
E-Curbs seal penetrations by using a plastic mold and a pour-in-place polymer seal. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing), and are specified for PVC, PIB, and TPO single-ply roofing membranes. The service temperature range for the E-Curbs is -40 F to 200 F, but should not be applied at temperatures below 32 F. This rectangular E-Curb was specifically designed to work with SnapNrack one-hole standoff kits and the SnapNrack HD...
ChemLink, #F1351GR E-Curb 9 in. MiniCurb Kit - Gray
Designed to seal roof penetrations, Replaces old-style metal pitch pans, Installs in under 15 minutes
Price: $169.95
Availability: In Stock
Usually ships within 1-2 Business Days
Green Roofing Solutions by Chem Link The MiniCurb™ was designed to seal small penetrations such as HVAC conduit and drains, exterior lighting supports, surveillance cameras, mounts for solar panels and light angle-iron struts. The MiniCurb is built with a special fiberglass reinforced nylon that is tough and durable. Its unique slip-fit components permit quick assembly around penetrations that can't be disturbed. MiniCurbs are installed with the same adhesive as the larger ChemCurbs® and a...
ChemLink, #F1211T Translucent Silicone DuraSil. Box of 24...
DuraSil Translucent Silicone
Price: $246.55
Availability: In Stock
Usually ships within 1-2 Business Days
DuraSil is a highly flexible silicone adhesive/sealant/caulk designed for 50% joint movement that can handle very low to high temperature extremes. It bonds to difficult surfaces quickly. Use on glass, aluminum, steel, masonry, polycarbonate, vinyl (PVC), fiberglass (FRP), acrylic, Kynar 500 PVDF, Tedlar PVF, coated metals and concrete. We stock DuraSil in white and translucent. This product contains no biocides or fungicides. It is ultra-low odor when wet and no odor once cured. The white...