The Guardian Fall Protection Skyhook line of anchorage connectors are made from powder-coated steel for increased durability and weatherproofing, and fit roof pitches from flat to 12/12. Skyhook Anchors can be installed on wood (3/4 inch CDX plywood or better) and metal (20 gauge or thicker) substrates, and are perfectly suited fo a variety of fall protection applications.
Features:
- Easy to install
- Models for variety of roof pitches
- Compatible with horizontal lifelines
- Worker capacity Range: 130-420 lbs
- Material: Powder-coated steel increases durability and provides weatherproofing
- Compatible with wood, concrete, or metal substrates
- Min. breaking strength: 5,000 lbs.
Applicable Standards: ANSI Z359.18-17, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910
Worker Capacity Range: 130-420 lbs.
Material: Powder-coated steel
Min. Breaking Strength: 5,000 lbs.
Applications:
Personal Fall Arrest:
Skyhook anchors may be used in Personal Fall Arrest applications to support:
- Maximum 1 Personal Fall Arrest System (PFAS). Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
- Maximum allowable free fall is 6’, unless used in combination with equipment explicitly certified for extended free fall.
- Applicable D-rings: Dorsal.
Work Positioning:
Skyhook anchors may be used in Work Positioning applications:
- Work Positioning systems allow a worker to be supported while in suspension and work freely with both hands.
- Structure must withstand loads applied in the directions permitted by the system of at least 3,000 lbs.
- Maximum allowable free fall is 2’.
- Applicable D-rings: Side only
Restraint:
Skyhook anchors may be used in Restraint applications. Restraint systems:
- Prevent workers from reaching the leading edge of a fall hazard.
- Always account for fully deployed length of SRL.
- Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs.
- No free fall is permitted.
- May only be used on surfaces with slopes up to 4/12 (vertical/horizontal).
- Applicable D-rings: Dorsal, Chest, Side, & Shoulder.