MIRO 3-R Spacer

The Model 3-R Spacer is 7.5 square and the base is gently rounded to prevent gouging the roof. The outer edges are raised 2" and increased elevations may be achieved by stacking Model 3-R-2 or 3-R-4 on 1 or 2 spacers, each with a height of 2". Four drainage ports are provided to prevent ponding within the device. The dimensional area resting on the roof is 7.5 inches square and 52.56 square inches exist of contact roof support

Increased Elevations for the 3-R-2 or the 3-R-4 Pipestand

Polycarbonate material, 7 1/2" square base. The top of the spacer is 2" high

Maximum Pipe Clearance: each spacer increases clearance of the pipe by 2"

Maximum load not to exceed 100 lbs., spacing not to exceed 10 ft.