Price: $21.47
Item #GUA-00455
Write a review!
Quantity:
Overview
For use on roofs from flat to 12/12 pitch, wood or metal. 5000 lb. anchor point. Fasteners included. Tested and approved for metal roofing applications, minimum 20 gauge metal or thicker, attached directly onto the surface. For metal installation: use (16) screws (8 per side), 6 in center column of fastener installation holes, in 1 hole left of center and 1 hole right of center. Guardian recommends HILTI Kwik-Pro self-drilling screws.
Features:
- Designed for temporary use on wood rooftops
- Fits all roof pitches from flat to sheer
- Lightweight and durable
- Composed of thick plated steel for longer lasting product life
- Designed offset holes help keep the truss from splitting
- Easy to Install
- Reusable
Technical Data:
Applicable Standards: OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.18-17, and ANSI A10.32-12
Worker Capacity Range: 130-420 lbs.
Material: Zinc-plated steel
Min. Breaking Strength: 5,000 lbs.
Please read and understand the manufacturer instructions before using this product.
Specifications
| Product Depth (in.) | 11.375 | Product Height (in.) | 6 |
|---|
| Product Width (in.) | 7.5 |
|---|
FAQ
Q. Can I use the temper anchor with nails?
A. Yes. Temper can be installed using 16d (16 penny) galvanized, or duplex (double headed) nails. However, when in less than a 4/12 roof pitch steepness, the worker MUST be in fall restraint instead of fall arrest.
Q. Why?
A. The 2" screws have adequate holding power no matter what the pitch, but nails lose holding power compared to the screws depending on how flat the anchor is. In the 12/12 pitch angle the nails actually pull against on another at an angle, whereas when the anchor is flat they simply pull out all in the same direction. Double headed nails are an advantage because they are easier to pull out and don't require a screw gun.
Q. Can I install the temper on a flat roof if I'm using nails?
A. Yes. But you must be set up in a fall restraint situation when using nails instead of the screws. Fall restraint actually restrains the worker from leaving the edge of the building. (ie. dog tied up so it can't actually run out in the road even if it wanted to).
Q. Do I have to buy the fasteners from you if mine get worn?
A. No, you may use any equivalent #12 x 2" screw or 3.5" 16d galvanized or duplex nail.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
Guardian Fall Protection 00710 Snappy Disposable Roof...
Temporary, single use, disposable anchor that fits any pitch. Packs of 8 and 25. Fasteners included
Price: $173.89
Availability: In Stock
Usually ships within 1-2 Business Days
The Guardian Fall Protection Snappy Anchor is a disposable anchorage connector designed to fit a wide variety of wood roof pitches. The Snappy is convenient, easy to install and remove, and meets all applicable OSHA regulations. To use, simply adjust the Snappy to fit over selected roof ridge, then nail into roof truss using all fastener installation holes. Supplied with all necessary fasteners. Features: Single UseCan be bent to fit any roof pitch Convenient and disposable Easy to...
FallTech 7414P - Weld-On D-Ring Anchor w/ Unplated...
Uncoated Steel Plate for Weld-on or Bolt-on Applications
Price: $26.80
Availability: In Stock
Usually ships within 1-2 Business Days
Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holes Anchorage Location: Select a suitable anchorage point that will support the strength requirement and minimize free fall and...
Guardian 00815 Bucket of Safe-Tie Premium Roofing Kit w/XL...
OSHA Compliant, XL Harness w/tongue buckle leg straps & padding, 50ft lifeline, reusable anchor & premium rope grab
Price: $220.00
Availability: In Stock
Usually ships within 1-2 Business Days
Each Kit Contains: Lightweight, Universal Fit Full Body Harness XL-2XL (Guardian #37016): Features our Impact Indicator tag that deploys if the harness has been involved in a fall 5 Points of adjustment for added comfortTongue Buckle leg straps Padded shoulders increase comfort and reduce the fatigue caused by the weight of tools Reusable Roof Anchor with Attachment D-Ring (Guardian #00455): Easily installs on any pitched or flat surface roofs with screws included Once job is complete, remove...
Guardian 00815 Bucket of Safe-Tie Premium Roofing Kit
OSHA Compliant, Harness w/tongue buckle leg straps & padding, 50ft lifeline, reusable anchor & premium rope grab
Price: $205.00
Availability: In Stock
Usually ships within 1-2 Business Days
Each Kit Contains: Lightweight, Universal Fit Full Body Harness M-L (Guardian #37015): Features our Impact Indicator tag that deploys if the harness has been involved in a fall 5 Points of adjustment for added comfortTongue Buckle leg straps Padded shoulders increase comfort and reduce the fatigue caused by the weight of tools Reusable Roof Anchor with Attachment D-Ring (Guardian #00455): Easily installs on any pitched or flat surface roofs with screws included Once job is complete, remove the...