Metal Roof Coating Applicators & Rollers

The R Panel is the most common metal profileAdapted to receive the 1.25" R panel ribThe frequency of R Panel rib is usually 12"Roller Length 8", Rib Height 1.25"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

The R Panel is the most common metal profileAdapted to receive the 1.25" R panel ribThe frequency of R Panel rib is usually 12"Roller Length 14", Rib Height 1.25"Packaged 9 per case, sold individuallyWill not work with the standard 14" SingleWide BetterSpreader tank. If the Profile Roller Tank Spreader was not purchased, please contact us to purchase the correctly sized tank necessary to ensure that the roller fits and holes are drilled to accommodate the profile. Item # 131-TK-RP-14 needed. ...

The High R Panel is not too tight at the top which allows for the heads of the fastenersThe frequency of the High R Panel rib is usually 12"Roller Length 8", Rib Height 1.5"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

The AG Panel derives its name from its use in agricultural applicationsHas the smallest groove of any of the Profile RollersHas a rib frequency of 9"Roller Length 8", Rib Height .75"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

This is a very common industrial panelThere are variations of this shape so confirm this roller will work with your profileThe 3/4" roller nap conforms to the small bends of this panelRoller Length 8", Rib Height 3"Packaged 4 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

The High-R Panel is the most common metal profileThe profile is not too tight at the top which allows for the heads of the fastenersThe frequency of the High-R Panel rib is usually 12"Roller Length 14", Rib Height 1.5"Packaged 9 per case, sold individuallyWill not work with the standard 14" SingleWide BetterSpreader tank. If the Profile Roller Tank Spreader was not purchased, please contact us to purchase the correctly sized tank necessary to ensure that the roller fits and holes are drilled...

This is a very common industrial panelhere are variations of this shape so confirm this roller will work with your profileThe 3/4" roller nap conforms to the small bends of this panelRoller Length 14", Rib Height 3"Packaged 4 per case, sold individuallyWill not work with the standard 14" SingleWide BetterSpreader tank. If the Profile Roller Tank Spreader was not purchased, please contact us to purchase the correctly sized tank necessary to ensure that the roller fits and holes are drilled to...

The AG Panel derives its name from its use in agricultural applicationsHas the smallest groove of any of the Profile RollersHas a rib frequency of 9"Roller Length 14", Rib Height .75"Packaged 9 per case, sold individuallyWill not work with the standard 14" SingleWide BetterSpreader tank. If the Profile Roller Tank Spreader was not purchased, please contact us to purchase the correctly sized tank necessary to ensure that the roller fits and holes are drilled to accommodate the profile. Item #...

Snap Lock Panels are usually used on slopes greater than 3:12The Snap Lock Roller can receive a rib up to 1/2" wide by 2" highThe roller also works on double lock seamsRoller Length 8", Rib Height 2"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

The top flange of a Single Lock Panel may exceed 1"The gap of the Single Lock Roller can handle ribs up to 1 1/2" wideThe inside vertical seam is difficult to reach. Use the new Side Swipe Roller to finishRoller Length 14", Rib Height 2"Packaged 9 per case, sold individuallyWill not work with the standard 14" SingleWide BetterSpreader tank. If the Profile Roller Tank Spreader was not purchased, please contact us to purchase the correctly sized tank necessary to ensure that the roller fits and...

The top flange of a Single Lock Panel may exceed 1"The gap of The Single Lock Roller can handle ribs up to 1 1/2" wideThe inside vertical seam is difficult to reach. Use the new Side Swipe Roller to finishRoller Length 8", Rib Height 2"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

Battens are usually applied for appearance on slopes exceeding 4:12Fits ribs up to 2.25" wide and 2" highRoller Length 8", Rib Height 2"Packaged 9 per case, sold individuallyDesigned to work with the 8" Titan Roller Frame, item # 131-1205. See related items below.

The Snap Lock Panel is usually used on slopes greater than 3:12The Snap Lock Roller can receive a rib up to 1/2" wide by 2" highThe roller also works on double lock seamsRoller Length 14", Rib Height 2"