Roof Zone

Penetrator 2+2 mobile fall protection system offers both unparalleled portability and compact design. Ships job site ready on a standard pallet, handles are retractable and pin into place. Optional cover available for rooftop storage when not in use. Remove cover for fall protection compliance at a moment’s notice for any workers requiring rooftop access. The Penetrator 2+2 provides fall protection for 2 fall arrest and 2 fall restraint or a total of 4 workers. When a fall occurs, the powerful...

Optional Equipment:Towing Clevis = item # TDE-65029, $45Rolled Goods Attachment Post = item # TDE-65030, $50Aluminum Tread Brite Decking = item # TDE-65031, $250Hoisting Rings = item # TDE-65032, $75 Operations Manual Installation Assembly Instructions ...

The universal guardrails are manufactured out of high strength low alloy steel (HSLA). Guardrails exceed all OSHA load requirements. All guardrails and bases are manufactured 100% in the USA.The Zip Base is a 3-hole base with galvanized or yellow TS22 coating and rubber feet (58 lbs). They nest and stack easily for storage before and after use. Zip Base offers superior resistance to impact loads and its unique design is 40% lighter than competitor bases. Comes with toe board slots on each side...

Optional Equipment:Towing Clevis = item # TDE-65029, $45Rolled Goods Attachment Post = item # TDE-65030, $50Aluminum Tread Brite Decking = item # TDE-65031, $250Hoisting Rings = item # TDE-65032, $75 Operations Manual Installation Assembly Instructions ...

Optional Equipment:Towing Clevis = item # TDE-65029, $45Rolled Goods Attachment Post = item # TDE-65030, $50Aluminum Tread Brite Decking = item # TDE-65031, $250Hoisting Rings = item # TDE-65032, $75 Operations Manual Installation Assembly Instructions ...

The new Roof Zone Penetrator Mobile Fall Protection system provides fall protection for 3 Fall Arrest and 2 Fall Restraint for a total of 5 Protected Workers. How Does It Work?: When a fall occurs it's powerful penetrating spike engages, piercing into the roof deck, creating a safe secure anchor. The Penetrator is compliant with OSHA Fall Protection Regulation 1926.502. This systems can be used on most substrates, EXCLUDES lightweight concrete. The Penetrator has been tested on built-up, TPO,...

Optional Equipment:Towing Clevis = item # TDE-65029, $45Rolled Goods Attachment Post = item # TDE-65030, $50Aluminum Tread Brite Decking = item # TDE-65031, $250Hoisting Rings = item # TDE-65032, $75 Operations Manual Installation Assembly Instructions ...

Accommodates 3/4" or 1" rope Ideal for use on scaffold platform300 lbs capacity  (Outrigger for scaffold not included.)

Long handle hoisting wheel designed for raising job site materials using any extension ladder. Comes with locking pins. Accommodates 3/4" or 1" rope (not included). Handle extends 26" and wheel is 12" diameter.

After proper set up, the Zip Rail Fall Protection System allows workers full mobility and access to the roof’s edge without the need of either a lanyard and harness or a warning line system. Utilizing the Zip Rail System, workers have a secure job site with improved roof accessibility, saving both time and money.The Zip Rail compression bracket installs on parapet walls or the gravel stop bracket may be fastened on a flat roof edge. Stanchions feature quick connecting pop pins for faster rail...

Adjustable and easy to use guardrail system for parapet walls and floor slabs. Unique tubular design allows for easier placement and installation. Adjusts to fit parapets up to 20 inches. Adjustable rail brackets for easy and fast attachment of 2 x 4’s. By inverting the compression base (shown far left), you can use as a universal guardrail for exposed floors, walkways, and decks or wherever you need a fall protection system. Maximum spacing of 8’. Complies to OSHA standards.

Make your next residential roofing job safer. Unique design features convenient handle for transporting to the job site. Adjustable rail brackets for easy and fast attachment of 2 x 4’s (not included). Guardrail works on both gutter and rake edge of roof. Lightweight and easy to install. Steep Slope Guardrail bracket has 5 adjustable pitch positions from 6/12 to 16/12, simply remove and tighten wing nut into the corresponding angle and you’re done! Extra wing nut and bolt attached. Maximum...

Roof Zone Rake Edge may be used on 16/12 rake edges as well as eave edges 4/12 pitch and under. In conjunction with the Roof Zone Steep Slope Bracket (#65014) on eave, an OSHA complaint guardrail system may be formed on any roof. Toe-board, Mid-rail, and Upper-rail require “premium grade” 2 x 4’s, not included. Instructions: Maximum spacing 8 ft. Rake and steep slope guardrail brackets required around entire working area to meet OSHA compliancy. In addition, “premium grade” lumber is required...

Easy to use! Position shingle on cutting table and slice Cuts most fiberglass and asphalt shingles Instruction Manual

Pre-galvanized 16 gauge steel tray, prevents rust Formed Skid Plate for easy movement on roof while installing shingles Foam pad bottom prevents sliding and damage to shingles 40" long x 14.5" wide Comes with one convenient hand hole

Roofing Trailer for moving felt, tear off debris, deck materials, and other big loads. Features : Steel Tube Design 30 in. width 72 in. length 2,000 lb. capacity 18 in. heavy duty tires Dead-man brake Coupling hitch for attaching multiple trailers in series

RECOMMENDED INSTALLATION: Roof Anchors must be installed and spaced a maximum of 20 ft. apart. Installation around the perimeter of the leading edge areas is recommended to ensure compliance and allow the user to easily switch from anchor to anchor. Recommended spacing is between 6 and 10 ft. from edge of roof. Do not install the roof anchor on unsupported roof structures such as overhangs or inadequately secured decking. Installation Instructions SPECIFICATIONS: This fall arrest anchor is for...

Designed to aggressively remove asphalt shingles, cedar shakes, and underlayments with ease. Serrated tempered steel blades allow for efficient nail and shingle removal. Serrated blade and skid plate are replaceable for longer tool life. Two sizes makes shingle removal easier at any roof pitch. Steel handles for longer life, no heavier than competitor wood and fiberglass handle models.

Designed to aggressively remove asphalt shingles, cedar shakes, and underlayments with ease. Serrated tempered steel blades allow for efficient nail and shingle removal. Serrated blade and skid plate are replaceable for longer tool life. Two sizes makes shingle removal easier at any roof pitch. Steel handles for longer life, no heavier than competitor wood and fiberglass handle models.

Serrated blade and skid plate are replaceable for longer tool life.

The Stripzilla Shingle Remover comes equipped with a dual action head for quick shingle and nail removal.Features:Head: 7 in. x 7 in. Made from: Hi-tensile steel

The Stripzilla Shingle Remover comes equipped with a dual action head for quick shingle and nail removal.Features:Head: 7 in. x 7 in. Made from: Hi-tensile steelD-handle provides additional comfort

Ergonomic, rugged steel tear-off tools for the removal of asphalt shingles, cedar shakes, and underlayments. Vinyl grip handle for improved hand comfort. Teeth are heat tempered for longer life. Four sizes available, choose shorter lengths for hard to reach areas and steep roof pitches.

Ergonomic, rugged steel tear-off tools for the removal of asphalt shingles, cedar shakes, and underlayments. Vinyl grip handle for improved hand comfort. Teeth are heat tempered for longer life. Four sizes available, choose shorter lengths for hard to reach areas and steep roof pitches.