Universal - Works for Every Job

Fall protection comes in many different forms and designs. The FallBan Cableguard System is the most versatile on the market. The FallBan stanchions can be configured and adjusted several different ways to accommodate gutters, parapet walls, gravel stops and overhang in a variety of shapes, heights and widths. FallBan was created by a roofer for roofing and construction in mind but can also be installed as a permanent fall protection system on commercial property, factories, warehouses etc... Standard color is safety yellow but other colors are available via special order.


Products 1-33 of 33
Show
New!
Fallban U.S Stanchion w/2 L Bolts- 1
FALLBAN Item #1
Price: $160.20
Availability: In Stock
FallBan Item #: FALLBAN-1 -

    This Fallban U.S Stanchion attaches to part number FALLBAN-1A (Rest, Stanchion to wall) and FALLBAN-1B (Stanchion Support Plate) View Instructions, preassemble stanchions across the perimeter for faster installation.Position along the perimeter, each with the configuration needed.1.) For an edge with a wall below use a standard stanchion 2.) Parapet Walls- assemble a basic stanchion, an extension bar(FALLBAN-4), and a parapet clamp (FALLBAN-6)3.) Overhang (with no wall below)- assemble basic...

    New!
    Fallban Rest, Stanchion to Wall, Assembly with foot- 1A
    FALLBAN Item #1A
    Price: $70.95
    Availability: In Stock
    FallBan Item #: FALLBAN-1A -

      This Fallban Rest, Stanchion to Wall Assembly attaches to part number FALLBAN-1 (U.S Stanchin w/2 L-Bolts) and FALLBAN-1B (Stanchin Support Plate)Instructions

      New!
      Fallban Stanchion Support Plate- 1B
      FALLBAN Item #1B
      Price: $58.95
      Availability: In Stock
      FallBan Item #: FALLBAN-1B -

        This Fallban Stanchion Support Plate connects with and holds part number FALLBAN-1 (U.S Stanchion). The plate sits perfectly on the edge of the roof. Instructions

        New!
        Fallban Foot, Stanchion To Wall Rest- 1C
        FALLBAN Item #1C
        Price: $32.00
        Availability: In Stock
        FallBan Item #: FALLBAN-1C -

          Replacement foot for part number FALLBAN-1A (Rest, Stanchion to Wall)

          New!
          Fallban Diagonal Brace, Complete Assembly- 2
          FALLBAN Item #2
          Price: $115.75
          Availability: In Stock
          FallBan Item #: FALLBAN-2 -

            This Fallban Diagonal Brace attaches to a completed - ready to install Stanchion. Prior to using these the completed stanchions must be preassembled on the roof edge at the same adjustments. On a corner(s) install a complete stanchion with 2 diagonal braces attached, 1 to face each direction.

            New!
            Fallban Foot, Diagonal Brace- 2A
            FALLBAN Item #2A
            Price: $34.50
            Availability: In Stock
            FallBan Item #: FALLBAN-2A -

              Attaches to Fallban-2 (Diagonal Brace, Complete Assembly) / Foot Replacement

              New!
              Fallban Swivel, for Diagonal Brace- 2B
              FALLBAN Item #2B
              Price: $24.55
              Availability: In Stock
              FallBan Item #: FALLBAN-2B -

                Attaches to Fallban-2 (Diagonal Brace, Complete Assembly) / Swivel Replacement

                New!
                Fallban Mid Brace U.S.- 3
                FALLBAN Item #3
                Price: $80.95
                Availability: In Stock
                FallBan Item #: FALLBAN-3 -

                  New!
                  Fallban Extension Bar- 4
                  FALLBAN Item #4
                  Price: $45.45
                  Availability: In Stock
                  FallBan Item #: FALLBAN-4 -

                    Attaches to FALLBAN-1 (U.S Stanchion) when used as a parapet wall system. 

                    New!
                    Fallban Parapet Clamp, Complete Assembly- 6
                    FALLBAN Item #6
                    Price: $96.75
                    Availability: In Stock
                    FallBan Item #: FALLBAN-6 -

                      This Fallban Parapet Clamp Assembly attaches to FALLBAN-1 (U.S Stanchion) and FALLBAN-4 (Extension Bar). This Piece is used when building a Stanchion for a Parapet Wall.

                      New!
                      Fallban Bolt w/ Swivel, Parapet Clamp- 6A
                      FALLBAN Item #6A
                      Price: $20.90
                      Availability: In Stock
                      FallBan Item #: FALLBAN-6A -

                        Attaches to FALLBAN-6 (Parapet Clamp, Complete Assembly) / Replacement 

                        New!
                        Fallban Handle, Parapet Clamp- 6B
                        FALLBAN Item #6B
                        Price: $9.55
                        Availability: In Stock
                        FallBan Item #: FALLBAN-6B -

                          Attaches to FALLBAN-6A (Bolt w/ Swivel, Parapet Clamp) part of FALLBAN-6 (Parapet Clamp, Complete Assembly) / Replacement

                          New!
                          Fallban Nut, Parapet Clamp- 6C
                          FALLBAN Item #6C
                          Price: $8.35
                          Availability: In Stock
                          FallBan Item #: FALLBAN-6C -

                            Attaches to FALLBAN-6D (Sphere Rod End, for Diagonal Brace) 

                            New!
                            Fallban Sphere Rod End, for Diagonal Brace- 6D
                            FALLBAN Item #6D
                            Price: $12.65
                            Availability: In Stock
                            FallBan Item #: FALLBAN-6D -

                              Attaches to FALLBAN-2B (Swivel, for Diagonal Brace) 

                              New!
                              Fallban Tensioning Weight- 7
                              FALLBAN Item #7
                              Price: $52.65
                              Availability: In Stock
                              FallBan Item #: FALLBAN-7 -

                                This hangs to the top rope when tensioning the cable. When tensioning leave J-Hooks loose and place the 15 pound Tensioning Weight on the top rope - half way between the Stanchion and Mid Brace.  View Installation Video for Additional Information. @ Time: 17:33 

                                New!
                                Fallban Toe Board Assembly- 8
                                FALLBAN Item #8
                                Price: $53.70
                                Availability: In Stock
                                FallBan Item #: FALLBAN-8 -

                                  New!
                                  Fallban Anchor Plate- 9
                                  FALLBAN Item #9
                                  Price: $63.95
                                  Availability: In Stock
                                  FallBan Item #: FALLBAN-9 -

                                    This can be used to start a cable. 

                                    New!
                                    Fallban Safety Lock Pin- 10
                                    FALLBAN Item #10
                                    Price: $3.85
                                    Availability: In Stock
                                    FallBan Item #: FALLBAN-10 -

                                      Attaches to FALLBAN-12 (U.S Stanchion Complete Assembly) / ReplacementAttaches to FALLBAN-4 (Extension Bar) Attaches to FALLBAN-1 & C1 (U.S & Canadian Stanchion) / Replacement

                                      New!
                                      Fallban J-Bolt- 11
                                      FALLBAN Item #11
                                      Price: $7.35
                                      Availability: In Stock
                                      FallBan Item #: FALLBAN-11 -

                                        Attaches to FALLBAN-3 (Mid Brace U.S) / Replacement 

                                        New!
                                        Fallban U.S Stanchion Complete Assembly- 12
                                        FALLBAN Item #12
                                        Price: $40.95
                                        Availability: In Stock
                                        FallBan Item #: FALLBAN-12 -

                                          Attaches to FALLBAN-1 & C1 (U.S & Canadian Stanchion) 

                                          New!
                                          Fallban L-Bolt- 13
                                          FALLBAN Item #13
                                          Price: $8.15
                                          Availability: In Stock
                                          FallBan Item #: FALLBAN-13 -

                                            Attaches to FALLBAN- 1 & C1 (U.S & Canadian Stanchion) Attaches to FALLBAN- 4 (Extension Bar) 

                                            New!
                                            Fallban Double Clevis (1/4 - 5/16)- 14
                                            FALLBAN Item #14
                                            Price: $8.35
                                            Availability: In Stock
                                            FallBan Item #: FALLBAN-14 -

                                              Attaches to FALLBAN-16,17,18 (1/4" Cables)

                                              New!
                                              Fallban 1/4" Cable Clip Thimble- 15
                                              FALLBAN Item #15
                                              Price: $0.78
                                              Availability: In Stock
                                              FallBan Item #: FALLBAN-15 -

                                                Attaches to FALLBAN-14 (Double Clevis 1/4 - 5/16)

                                                New!
                                                Fallban 1/4" Cable 500'- 16
                                                FALLBAN Item #16
                                                Price: $205.00
                                                Availability: In Stock
                                                FallBan Item #: FALLBAN-16 -

                                                  You will have multiple possibilities for attaching the cable to terminate. Below are just a few examples. 1.) Unroll a ¼ inch cable along the perimeter of the roof. An easy way is to secure the end of the cable either at the stanchion or a cable termination anchor (View Fig.1). Put a broom handle through the roll of cable, hold the broom handle on both sides of the roll of cable, and walk along the perimeter to unroll the cable along the entire area to be protected.2.) Next, start where the...

                                                  New!
                                                  Fallban 1/4" Cable 250'- 17
                                                  FALLBAN Item #17
                                                  Price: $114.30
                                                  Availability: In Stock
                                                  FallBan Item #: FALLBAN-17 -

                                                    You will have multiple possibilities for attaching the cable to terminate. Below are just a few examples. 1.) Unroll a ¼ inch cable along the perimeter of the roof. An easy way is to secure the end of the cable either at the stanchion or a cable termination anchor (View Fig.1). Put a broom handle through the roll of cable, hold the broom handle on both sides of the roll of cable, and walk along the perimeter to unroll the cable along the entire area to be protected.2.) Next, start where the...

                                                    New!
                                                    Fallban 1/4" Cable 100'- 18
                                                    FALLBAN Item #18
                                                    Price: $56.55
                                                    Availability: In Stock
                                                    FallBan Item #: FALLBAN-18 -

                                                      You will have multiple possibilities for attaching the cable to terminate. Below are just a few examples. 1.) Unroll a ¼ inch cable along the perimeter of the roof. An easy way is to secure the end of the cable either at the stanchion or a cable termination anchor (View Fig.1). Put a broom handle through the roll of cable, hold the broom handle on both sides of the roll of cable, and walk along the perimeter to unroll the cable along the entire area to be protected.2.) Next, start where the...

                                                      New!
                                                      Fallban 1/4" Ratchet Puller- 19
                                                      FALLBAN Item #19
                                                      Price: $58.95
                                                      Availability: In Stock
                                                      FallBan Item #: FALLBAN-19 -

                                                        This Fallban Ratchet Puller helps pull the cable and attaches with part number FALLBAN-9 (Anchor Plate)

                                                        New!
                                                        Fallban Hook Snap- 20
                                                        FALLBAN Item #20
                                                        Price: $1.55
                                                        Availability: In Stock
                                                        FallBan Item #: FALLBAN-20 -

                                                          Attaches to FALLBAN-19 (1/4" Ratchet Puller) 

                                                          RACE Perimeter Warning Flags
                                                          Meets OSHA Compliance Standard (yellow, HD, Red, Multi-Colored)
                                                          Price: $6.95
                                                          Availability: In Stock
                                                          RACE

                                                            Standard: 105 ft.longIncreases visibility of hazardous areas 18" x 12" triangle flags Flags are spaced 22" apart500 lb. OSHA compliant break strength 12/box, 48/case Heavy Duty:  105 ft.longIncreases visibility of hazardous areas18" x 12" triangle flagsFlags are spaced 22" apart500 lb. OSHA compliant break strengthHeavy Duty material (6 mil) last longer than standard warning line flagsPennants are twice as thick compared to standard flags (6 mil vs 3 mil)12/box, 36/case ...

                                                            New!
                                                            Fallban Metal Storage Pallet- 50
                                                            FALLBAN Item #50
                                                            Price: $2,200.00
                                                            Availability: In Stock
                                                            FallBan Item #: FALLBAN-50 -

                                                              This Fallban Metal Storage Pallet is used for storage and transportation. It is durable and helps make clean up fast and easy.

                                                              New!
                                                              Fallban Stanchion Canadian w/2 L Bolts- C1
                                                              FALLBAN Item #C1
                                                              Price: $148.60
                                                              Availability: In Stock
                                                              FallBan Item #: FALLBAN-C1 -

                                                                This Fallban Canadian Stanchion attaches to part number FALLBAN-1A (Rest, Stanchion to Wall) and FALLBAN-1B (Stanchion Support Plate) View Instructions, preassemble stanchions across the perimeter for faster installation.Position along the perimeter, each with the configuration needed.1.) For an edge with a wall below use a standard stanchion 2.) Parapet Walls- assemble a basic stanchion, an extension bar(FALLBAN-4), and a parapet clamp (FALLBAN-6)3.) Overhang (with no wall below)- assemble...

                                                                New!
                                                                Fallban Mid Brace Canadian- C3
                                                                FALLBAN Item #C3
                                                                Price: $76.10
                                                                Availability: In Stock
                                                                FallBan Item #: FALLBAN-C3 -

                                                                  New!
                                                                  Fallban Canadian Adapter- C5
                                                                  FALLBAN Item #C5
                                                                  Price: $74.75
                                                                  Availability: In Stock
                                                                  FallBan Item #: FALLBAN-C5 -

                                                                    Benefits/Features

                                                                    • Meets OSHA and Canadian SOR requirements
                                                                    • Easy and quick set up
                                                                    • Increases efficiency and productivity on the roof
                                                                    • Usable on many different roof edge types
                                                                    • Lighter and stronger than wood frame systems
                                                                    • Affordable even on big roof areas
                                                                    • Doesn’t get in the way of roofing
                                                                    • Stanchions can be spaced up to 20 feet (6 M Canadian)
                                                                    • Temporary or permanent installation (Stainless Steel available for permanent)
                                                                    • Allows freedom from harness, ropes and lanyards
                                                                    • Projects look professional and organized
                                                                    • Keeps workers safe and reduces injuries
                                                                    • Increased company profits while being OSHA and SOR compliant.

                                                                    Installation

                                                                    • Once you’ve decided where a perimeter fall protection is to be installed, measure and mark 20 ft intervals on the roof perimeter edge for stanchions placement.
                                                                    • Assemble stanchions to the particular roof edge type required.
                                                                    • Install stanchion, mid brace, diagonal braces, cables, and misc. hardware.
                                                                    • The roof is ready for work to commence, safe and unrestricted.

                                                                    View Installation Instructions | Daily Inspection Log | Yearly Inspection & Maintenance Log

                                                                    Best Sellers

                                                                    RACE Perimeter Warning Flags
                                                                    Meets OSHA Compliance Standard (yellow, HD, Red, Multi-Colored)
                                                                    Price: $6.95

                                                                    Standard: 105 ft.longIncreases visibility of hazardous areas 18" x 12" triangle flags Flags are spaced 22" apart500 lb. OSHA compliant break strength 12/box, 48/case Heavy Duty:  105 ft.longIncreases visibility of hazardous areas18" x 12" triangle flagsFlags are spaced 22" apart500 lb. OSHA compliant break strengthHeavy Duty material (6 mil) last longer than standard warning line flagsPennants are twice as thick compared to standard flags (6 mil vs 3 mil)12/box, 36/case ...