Material Handling Tools

Ames #10 aluminum scoop is ideal for the transport of all materials, loose and bulky. It is durable and lightweight for snow removal. Features Northern hardwood handle for strength and durability. Features: Rust proof aluminum bladeErgonomic D-handle for added comfort and controlNorth American Hardwood handle for strength and durability Thick aluminum alloy for maximum strength Dimensions:  44-1/2 in. H x 14-1/2 in. W x 10 in. D 15 YR WARRANTY* ...

The Ames 2682700 #12 poly scoop is a versatile, general purpose, year round tool. It is well suited for a variety of lawn and garden uses as well as farm and agricultural ones. It is primarily used to lift and transfer a variety of materials, including stone, soil, and grain. Features: Large Poly D-grip for leverage and controlNorth American Hardwood handle for strength and durability15 Year Warranty Dimensions: 46-1/2 in. H x 14 in. W x 10 in. D ...

The True Temper spading fork is a multipurpose tool that can be used for turning, digging, and loosening all types of soil. It can also be used to transfer loose material. The forged head contains 4 diamond-shaped tines for maximum strength and durability.Features:Forged Steel Head Dims: 6.75"W x 44.75"H x 2"DD-Grip on Fiberglass Handle4-TineBright Yellow For High-Vis ...

Blade forged and hardened alloy steel with v-notch in tapered edge Heavy, strong multi-purpose tool 3" width protects concrete when stripping forms Ideal for prying forms and for use to align walls during tilt-up construction, to measure shingles and flooring; to roll and align large pipe.. Great for removing wood nailer, roofing curbs, prying up rotten metal decking and general demo work. IT’S A BEAST!

The Clawverine Roofing Tool is the Ultimate Step Flashing Cleaning bar. Takes off the hard to get shingles under domers, step flashing, siding wall, and stuccoes side wall with side sliding mode, and is used against the wall with its round face that takes off nails without prying but with a slide and turn action

Estwing’s 11 inch DEP12, nail puller has an attractive blue and yellow paint, has polished ends and is extremely strong and durable, this tool can pull a variety of fasteners. The nail puller claws are precise and sharp to remove imbedded or headless nails with ease and minimal wood damage. Shaped rounded head design gives you improved leverage. The precision thin claw end design enables you to get into hard to reach places. Features Made of Steel DEP12 is Slotted on Both Ends for Nail Pulling...

Features: Aluminum scoop head 15″ wide by 20″ long.Ash stem with a Polypropylene D grip.Overall length approximately 45″.Weight 4.11 lbs.

Tear-Off Spade w/Long Wood Handle Metal powder coated head with smooth edge. Offered with or without Fulcrum. Premium Northern Ash wood handle that's coated with a clear lacquer for a natural looking finish. Handle is dual riveted in to the socket for durability and strength.

Features: Blade width: 10-3/4" Blade Height: 16" 14 GA. Steel Powder Coated Black Steel Head Handle: Premium Northern Ash protected with a clear lacquer for a natural looking finish Length: 62" Handle is dual-riveted into the socket.

The Heavy Duty Spud Bar is ideal for roof tear-offs of shingles, plywood, and rubber roofs. Tapered head makes removing nails an ease.  All-welded steel constructionAvailable in 3.5″ or 6" spud widthHeavy duty teeth for pryingMade of 1 1/4″ heavy wall pipeKnob handleDims: L 54" x W 3.5"-6"Diameter: 1.25" Common Use:  Roof tearoff's of shingles and rubber roofs Prying shingles and plywood on roofs Great for use on tough shingles and hard to remove...

This Razor-Back square point shovel is an essential part of any tool assortment. Ideal for lifting and moving heavy loads of rock, soil, and other materials. Designed to transport loose material, such as soil, sand and gravel. Forged Steel Blade.D-Grip grip handle.Dual rivit SocketForward turned step.North American hardwood handle.41.50″ height × 9.625″ width × 6.625″ depth.Made in the USA. ...

Features: Multipurpose drum bung nut wrench eliminates the need for extra tools for drum bungs or plugsIncludes a ring and faucet wrench feature for ideal operationFeatures durable construction for added strength and long lifeUniversal design fits all types of metal or plastic for optimal resultsSpark ResistantBung Openings (in.): 2 and 3/4Wrench Opening (in.): 1-1/2Handle Length (in.): 4-1/4Dims: 1.75 W x 10.5 L x 2.25 H ...

Specially bent profile used for the prying sheet metal from tight quarters such as the drip edgeStrong reinforced steel constructionOAL: 10″

 The Cedar Ripper Roofing Tool is one of the most cost effective and clever designs to hit the roofing industry in decades. This highly productive tool will remove 20 cedar shakes at one time vs. only 6 shakes using today’s standard method of pitch and shovel. It also avoids hitting the shake nails that slow removal due to its slimmer design that fits between the rows of nails.  Pitch forks and shovels both pop the material off the roof structure; this breaks the material into...

3-1/2 lb. Forged single bit axe head.Hickory wood handle.Overall length approximately 36″-40"

3-1/2 lb. Forged single bit axe head.Heavy Duty Fiberglass handle.Overall length approximately 36″-40"

Heavy duty, strong T steel handle Tines are 11 1/2" long with 7" head width Overall length is 41"

Ergonomic Weighted Comfort Grip Handle Protects Hands Pry Bar and Built-in Hammer Compound angle gets under nails with ease--A full 3” of lift Grabs nail head quickly and securely One-piece heat treated, forged design for maximum strength Things can get a little crazy when you’re ripping a house down. But that doesn’t have to put your knuckles at risk. Because the The Gripbar’s padded handle sits above the main shaft shielding your hand from sharp edges as you rip lath off or dig in under...

AJC’s 13” long pry bar has a wider end designed for loosening shingles, flashings, prying and lifting. Forged from heavy-gauge tempered carbon steel.

This 15" Estwing Handy Bar is forged half round for added strength and less weight. Wide, thin blade for easy prying. 15" length. Features Made of Steel Forged Half Round for Added Strength Two sizes: 15" or 21" Length Made in Taiwan Forged in one Piece The most durable, longest lasting striking tools available Lightweight and Durable Rounded construction to reduce weight & increase strength High Leverage Design Engineered to produce maximum torque when pulling nails & prying boards Extra Wide...

When Howard Vaughan Sr. had the idea for the Superbar, he saw it as a new and revolutionary design, different from any prybar then available at that time. He had no idea how popular this deceptively simple tool would become. Today no toolbox - professional or D-I-Y - can be considered complete unless it includes a Vaughan Superbar. Compare the Vaughan Superbar with any of its competitors and you'll see the differences immediately. From its unique, "shepherd's crook" rocker head to its sharp,...

Panther 7 in. Spud Bar with Knob Handle

Heavy-duty steel tube design, Ideal for removing old roofng, mopped down trouble spots, slag and gravel, and eliminating fasteners. Blades are replaceable (bolt-on) and made with hardened steel for longer life. Spud Bars are available with either 3-/12” or 7” blades and a “D” or Knob handle. Knob handle spud bar overall length is 54-1/2” and 57” with a D-Handle. Spud bar comes with one blade.

Heavy-duty steel tube design, Ideal for removing old roofng, mopped down trouble spots, slag and gravel, and eliminating fasteners. Blades are replaceable (bolt-on) and made with hardened steel for longer life. Spud Bars are available with either 3-/12” or 7” blades and a “D” or Knob handle. Knob handle spud bar overall length is 54-1/2” and 57” with a D-Handle. Spud bar comes with one blade.

Blade for Spud Bar. Replacement 3-1/2" hardened blade.Features:3-1/2" Replacement Blade for Spud Bar3-1/2" wide x 4" long x 1/16" thickSturdyMade from high quality material

Blade for Spud Bar. Replacement 7" hardened blade. Features:  7" Replacement Blade for Spud Bar7" wide x 1/16" thickSturdy Made with high quality material

Removes gravel and slag Ideal for mopped down trouble spots Removes old roofing Shears off fastenings Pre-hardened blades for longer wear Quick change replacement blades All steel construction Powder coated safety yellow

1-1/2" x 4"

2" x 4"

Made in USAHickory shaft handle 11” x 15” blade Poly-D style grip

Scoop is 14" deep and 13" tall Overall length of tool is 36 1/2"

The Foxy 771 border spade is designed to be used in confined areas between vegetables and closely planted flowers. It is a great tool for digging and transplanting perennials. The 48-inch hardwood handle with an open-back blade and crimp collar allows the user to dig effectively in confined areas. Key Features: Closed back design prevents mud and dirt build up Seal-coated premium northern ash handle for strength and durability Extended 9" blade socket for stronger connection between handle and...

A favorite with roofers, these tear-off spades have a face size of 7" x 11" and feature an extra wide heel size 6" x 9". Overall length is 61". Straight edge with strong and dependable steel handle.

A favorite with roofers, these tear-off spades have a face size of 7" x 11" and feature an extra wide heel size 6" x 9". Overall length is 61". Serrated edge with strong and dependable steel handle.

Plain edge (Serrated edge also available) Solid core fiberglass handle Spade is 7" x 11" an extra wide heel 6" x 9" Overall length is 61"

Serrated edge (Plain edge also available) Solid core fiberglass handle Spade is 7" x 11" an extra wide heel 6" x 9" Overall length is 61"

#3 heel has become the most popular heel of choice Heel measures 6” x 11”, covers and reinforces 80% of the spade Head 7” wide x 11” long 48” Wood handle

#3 heel has become the most popular heel of choice Heel measures 6” x 11”, covers and reinforces 80% of the spade Head 7” wide x 11” long 48” Wood handle

#3 heel has become the most popular heel of choice Heel measures 6” x 11”, covers and reinforces 80% of the spade

Metal D-grip / 43” length Head measures 7” wide x 11” long