FallTech

Single-Use roof anchor with nails features user fold-bend to fit roof peaks. Single-use temporary anchor can be removed or hammered down.  Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eyeIncludes 16D nails for roof ridge installation.For temporary use on wood structuresMeets OSHA 1926.502 regulationsAnchor: Plated carbon steelStatic Strength 3,600 lb MinANSI User Capacity 130 to 310 lb max.OSHA User Capacity 130 to 310 lb max.In compliance...

The 2-Foot Concrete Web Anchor Strap with Loop and D-Ring is constructed using heavy-duty 1-inch polyester webbing with a 1-5/8-inch polyester wear tube installed to prevent damage from abrasion. It is an excellent temporary anchor for use in new concrete construction, which can be cut off and discarded when work is completed. The looped end attaches to rebar prior to pouring, and is ready to use after curing. It is ideal for shear walls, columns, etc. and can be used on both vertical and...

FallTech 7440 Concrete Temporary Wedge Anchor is lightweight and compact and features a swaged D tie-off point. The anchor is portable and reusable and offers a trigger pull for easy installation and removal. The wedge anchor is designed for use in fully cured concrete for vertical wall and overhead ceiling applications. Features: Movement – A Swiveling Eye design provides 360° D-ring rotation and the spring and cable shaft allows for unrestricted pivot movement. Installation – Requires a ¾” x...

Setting up a portable construction guardrail system is a cornerstone of fall prevention when working on open floors or roof tops where fall hazards exist. The FallTech portable guardrail components provide a secure and effective perimeter for both roof tops and when closing off a floor to eliminate a fall hazard. The design offers a versatile clamp and post that are able to be installed on both a parapet or on the edge of a concrete slab. • Adjustable – Clamping capacity ranges from 6.5” to...

FallTech Journeyman Flex Harness have been enhanced with breathable lightweight pad sets, durable construction, and a wide variety of configurations. The Journeyman Flex Harness combines wear-ability and versatility for the everyday workplaceFeatures:Lightweight Aluminum hardware and stitched down pads for better fitPremium breathable padded air mesh Shoulder Yoke with integral Non-slip Dorsal D-ring adjustmentQuick connect Visi-lock chest buckleForged Aluminum Alloy D-ring, Torso adjusters...

FallTech Journeyman Flex Harness have been enhanced with breathable lightweight pad sets, durable construction, and a wide variety of configurations. The Journeyman Flex Harness combines wear-ability and versatility for the everyday workplaceFeatures:Forged Aluminum alloy D-rings, torso adjusters and belt bucklesPremium breathable padded air mesh shoulder yoke with integral non-slip dorsal d-ring adjustment18 in. contoured stitched-down leg pads6 in. Premium torso-sewn waist support...

The new Falltech Chain Roof Anchor, is a highly portable and reusable anchor to be used on residential and commercial wood structures.  The Anchors O-Ring serves as the attachment point for either a PFAS or on HLL system. With it's heavy steel anchoring plates and flexible belted rubber center, the Chain Roof Anchor can be installed either on the ridge or on the field of a roof and may be used on flat or pitched surfaces. The Anchor is Easily installed with nails as a Single-Point anchor...

The FallTech 727630LE SRD is designed to provide the highest level of safety when working around unprotected sides and edges including leading edges. Tested to the most rigorous global standards the FallTech 727630LE is third party certified as compliant with the leading edge test requirement of ANSI Z359.14-12Features:May be used as a traditional SRD for overhead anchorage options or in below harness D-ring anchorage systems7/32 Galvanized steel cable for added cut resistanceDual Absorber...

The FallTech 727650LE SRD is designed to provide the highest level of safety when working around unprotected sides and edges including leading edges. Tested to the most rigorous global standards the FallTech 727650LE is third party certified as compliant with the leading edge test requirement of ANSI Z359.14-12Features:May be used as a traditional SRD for overhead anchorage options or in below harness D-ring anchorage systems7/32 Galvanized steel cable for added cut resistanceDual Absorber...

The FallTech 8595A Roofer's Kit Plus contains : 7016 UniFit Contractor Full Body Harness 8150 50 ft. Vertical Lifeline 8368 Shock Absorbing Lanyard 7410 Hinged Reusable Roof Anchor All inside a 5 gallon reusable plastic bucket

FallTech 7410 Reusable Roof Anchor is constructed using rugged alloy steel with a yellow chromate finish. It is easily installed and removed from trusses or sheathing and uses either 12 #14 x 3½" screws of 20 16d nails. Fits any roof peak up to 12/12 and can also be mounted perfectly flat. Rated at over 5,000 lbs. Economical because it can be used again and again Holes are clearly marked for use with either nails or screws Screw holes are counter-sunk so screws are flush with the anchor Meets...

Double D-ring; Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-rings Exposed for Attachment; 17" Including D-rings with 12" Nailing Surface.Features: Designed for installation under roof ridge capFeatures 12" stainless steel nailing plate with 2-1/4" connecting D-rings.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulationsNailing Plates: Stainless steelD-rings: Plated alloy steel; 5,000 lb min....

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesInstallation Plate: Unplated alloy steelD-ring: Plated alloy; 5,000 lb min. static strengthStatic Strength: 5,000 lb...

Single D-ring, Permanent Roof Anchor with Stainless Steel Body; Fastens Under Shingles, Leaving D-ring Exposed for Attachment; 19" Including D-ring with 17" Nailing Surface. Features:  Designed for under-tile roof ridge or field installationFeatures 17" stainless steel nailing plate with 2" connecting D-ring.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulationsNailing Plates: Stainless steelD-ring: Plated alloy steel; 5,000 lb...

Bolt-on D-Ring Anchor with Installation Plate  Features: Forged D-ring and Bolt-on PlateProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holesComplies With ANSI Z359.18-2017  Installation Plate: Plated alloy steelD-ring: Plated alloy; 5,000 lb min. static strengthStatic Strength: 5,000 lb min ANSI User Capacity: 130 to 310 lb maxOSHA User...

Features:  For temporary use in existing openings during construction stages where doors and windows are not yet installedNo tools required with simple clamp-in non-penetrating, non-marring installation.Features telescoping adjustment for openings from 21" to 51" wideLight weight extruded aluminum construction with durable steel clamping feetMeets OSHA 1926.502 regulations Anchor Frame: Extruded Aluminum  Static Strength: 3,600 lbs min  ANSI User Capacity: 130 to 310 max...

Parapet Anchor Powder coated steel constructionProtective foot pads on main body and final adjustment clampInstalls on structurally sound parapet walls between 1/2" and 15" thickMinimum parapet height of 9"May be used with FallTech Horizontal Lifelines, item #'s 777030, 777050, 777075, and 777100 (to be used only as instructed in user's manual)No fasteners required Instruction Manual Spec Sheet Declaration of Conformity ...

Features : High-strength, double-braided rope HLL with alloy steel tensioning device Requires use of Shock absorbing Lanyard or Self-Retracting Device for fall arrest Requires no special tools and can be installed and removed in minutes 4-person Temporary Horizontal Lifeline Kit Includes : Synthetic Rope Line Tensioner 4 O-rings 2 Carabiners 2 Pass-through Anchors Storage Bag

Rugged forged alloy steel construction One-hand operation provides user with ease of use even when wearing gloves User installed steel Captive Pin helps guard against misplacement or loss of carabiner when not in use Medium Twist Lock 1 in. Opening 3,600 lbs. Gate

Rugged forged alloy steel construction One-hand operation provides user with ease of use even when wearing gloves Compact Twist Lock 7/8 in. Opening 3,600 lbs. Gate

Rugged Alloy-Steel constructionDouble locking gate2-1/4 in. gate openingRated at over 8,000 lbsMeets ANSI and OSHA requirements

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job. Features: For 5/8" Rope Single Leg Shock Pack Manual Rope Grab Snap Hook Integral energy absorber and rope grab set Manual rope grab is user-activated for movement and placement at the desired height on lifeline Locks onto the rope lifeline at the onset of a fall event...

ViewPack™ Shock Absorbing Lanyards set the standard for energy absorbing lanyards. A traditional pack-style shock absorber with clear PVC inspection window allows for easy inspection of the internal materials while protective label covers enhance the durability and product lifespan. Features: Single Leg 6 ft. Length 2 Snap Hooks Rugged 1" polyester webbing provides extreme UV resistance Exclusive ViewPack™ design combines protection of labels with view-window for inspection of internal energy...

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job. Features: Double Y-leg for 100% Tie-off 6 ft. Length 3 Snap Hooks Full-length internal energy absorber limits fall forces to 900 lbs or less Durable tubular polyester outer jacket web resists abrasion and UV 3,600 lbs gate strength on all steel connectors Contrasting...