• Fallban 1/4" Cable 500'- 16 - FALLBAN-16
  • Fallban 1/4" Cable 500'- 16 - FALLBAN-16
  • Fallban 1/4" Cable 500'- 16 - FALLBAN-16
  • Fallban 1/4" Cable 500'- 16 - FALLBAN-16
New!
Best Price Guaranteed
Price: $205.00
    Item #FALLBAN-16
    Write a review!
    Quantity:

    Description

    You will have multiple possibilities for attaching the cable to terminate. Below are just a few examples.

    1.) Unroll a ¼ inch cable along the perimeter of the roof. An easy way is to secure the end of the cable either at the stanchion or a cable termination anchor (View Fig.1). Put a broom handle through the roll of cable, hold the broom handle on both sides of the roll of cable, and walk along the perimeter to unroll the cable along the entire area to be protected.

    2.) Next, start where the cable was secured and hook the cable to the top cable holder on each stanchion (View Fig.2)( or a lower cable holder if only 2 cables are being used), whatever is required to achieve a minimum of 42” height of top cable) Pull the cable fairly tight as you go all around this area and put a cable clamp on the holding side of the last stanchion (View Fig.3) to hold the cable taut while the remaining cables are set in place.

    View Instructions for more options and information

    Attaches to FALLBAN-1 & C1 (U.S & Canadian Stanchion) 

    Attaches to FALLBAN-3 (Mid Brace U.S)

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Leave a message