• Fabenco, #A71-27PC Self-Closing Safety Gate Powder Coat - FABENCO-A71-27PC
  • Fabenco, #A71-27PC Self-Closing Safety Gate Powder Coat - FABENCO-A71-27PC
Ships Free!
Best Price Guaranteed
Price: $345.00
    Item #FABENCO-A71-27PC
    Write a review!
    Quantity:

    Description

    FabEnCo Model A71-27PC
    The Original Self-Closing Safety Gate
    A36 Carbon Steel with Safety Yellow Powder Coat
    Fits clear opening 28-30.5"

    The FabEnCo A Series self-closing safety gate was the industry’s original double bar safety gate. For fall protection as required by OSHA at ladder, platform, stair and mezzanine openings. Determining the proper gate size for your application only requires the measurement of the inside clear opening.  

    • Easy to Install--No cutting, welding or drilling. Installs in minutes using simple hand tools.
    • Stainless Steel Spring--Custom-made stainless steel spring automatically closes the gate after each passage.
    • Positive Stop--Unique stop mechanism provides positive stop without handrail post contact. 
    • Variety of FabEnCoat™ Finishes--Available in galvanized steel or safety yellow powder coated.
    • Fits on all handrails.
    • Mounts left or right.

    Installation

    FabEnCo’s self-closing swing gate can be easily installed in minutes on all types of handrails (angle, flatbar, pipe) or to existing walls. Our swing gate can be mounted left or right, on either side of a handrail. The safety gate’s stainless steel spring automatically closes after each passage and adjustment bolts provide positive stop without handrail contact.



    Hardware/Parts
    A. U-Bolt* (1)
    B. J-Bolt* (1)
    C. 1/2” Zinc-Plated Bolts (2)
    D. 1/2” Zinc-Plated Nuts (4)
    E. 3/8” Zinc-Plated Nuts (2)
    F. 3/8” Zinc-Plated Washers (2)
    G. Channels (2)
    H. Mounting Plate/Frame Assembly (1, with 2 adjustable stop bolts)
    * Use U-Bolt for installation on pipes and J-Bolt for installation on angles. Suggested Tools – Adjustable Wrench, Socket Set with 7/8” and 11/16” Sockets

    • Step 1 – Insert the U-Bolt (or J-Bolt) through the slot in the Mounting Plate/Frame Assembly. Fasten to the handrail with the 3/8” Washer(s) and 3/8” Nut(s). 
    • Step 2 – Insert the 1/2” Bolts through the set of holes at the desired level on one Channel, then through the Mounting Plate/Frame Assembly. Fasten the 1/2” Nuts onto the 1/2” Bolts and tighten flush against the Mounting Plate/Frame Assembly to stabilize. 
    • Step 3 – Place the second Channel on the other side of the handrail and tighten with the remaining 1/2” Nuts.

    FAQ

    Q: Where is a self-closing safety gate required?
    A: The most common application for FabEnCo self-closing safety gates is fall protection on an elevated work platform with an unprotected opening, such as a ladderway or stair opening. Please see OSHA regulations under 1910.23 – Guarding Floor and Wall Openings and Holes below:

    1910.23(a)(2) “Protection for floor openings” Every ladderway floor opening or platform shall be guarded by a standard railing with standard toeboard on all exposed sides (except at entrance to opening), with the passage through the railing either provided with a swinging gate or so offset that a person cannot walk directly into the opening.

    1910.23(c)(1) “Protection of open-sided floors, platforms, and runways” Every open-sided floor or platform 4 feet or more above adjacent floor or ground level shall be guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder. The railing shall be provided with a toe board wherever, beneath the open sides,

    1910.23(c)(1)(i) Persons can pass,

    1910.23(c)(1)(ii) There is moving machinery, or

    1910.23(c)(1)(iii) There is equipment with which falling materials could create a hazard.

    Q: Other than fall protection, what are other uses for safety gates?
    A: FabEnCo safety gates can provide additional safety solutions, including access control, machine guarding, pedestrian traffic management and security.

    Q: Do your safety gates meet OSHA’s load requirements?
    A: Yes, we have tested our standard safety gate models to meet and exceed OSHA’s 200 pounds top rail pressure requirement. 1910.23(e)(3)(v)(b) A strength to withstand at least the minimum requirement of 200 pounds top rail pressure;

    Q: How do I determine what size safety gate I need?
    A: Simply measure the rail-to-rail clear opening between your handrails, then find the corresponding size needed on your desired safety gate model size list. For most safety gate models, we offer eight standard sizes fitting clear openings 17” to 39.5”.


    Q: How do your safety gates stop without hitting the opposite handrail and how large is the gap in between?
    A: All safety gate models have a positive stop near the gate hinge, allowing the gate to stop without hitting the opposite handrail. This eliminates the pinch point between the gate and handrail.

    • A and XL Series – adjustable stop bolts
    • R, RX, Z and ZT Series – stop plate

    Our safety gate sizes and corresponding clear opening widths allow for a 1” to 3” gap between the gate and opposite handrail, however you may adjust this distance as needed with slight adjustments to the mounting position. Please note that there is no adjustment available when mounting at 90˚ to the handrail.

    Q: Can your safety gates be mounted at 90˚ to the handrail?
    A: Yes, all safety gate models can be mounted at 90˚ to the handrail with simple adjustment.

    • A and XL Series – adjust the stop bolts to your desired position up to 90˚
    • R, RX, Z and ZT Series – reverse the direction of the stop plate for a 90˚ mount

    Q: Can your safety gates be mounted to a wall?
    A: Yes, all safety gate models can be mounted to various wall types either in-line at the wall edge or at 90˚ to the wall surface. If requested, the A and XL Series can be purchased without the mounting channels for a wall mount. Please note that for some wall types, additional hardware, including anchors, is not provided.

    Q: I’m not sure if I need galvanized or safety yellow powder coated safety gates. What do you recommend?
    A: Both the hot-dipped galvanizing and the powder coating finishes are of excellent quality.

    The hot-dipped galvanizing process creates a corrosion resistance and protection that becomes part of the metal. A scratch will be thoroughly protected by the zinc within the metal.

    The powder coating process has a base layer of a baked-on zinc-rich epoxy followed by the yellow baked-on powder coat; therefore, a scratch to the coating will not degrade the protection beneath.

    Reviews (0) • Write a review!

    This product has no reviews yet. Write a review!

    Related Items
    Ships Free!
    Fabenco, #A71-27 Self-Closing Safety Gate A36 Carbon Steel...
    A71-27, Fits 28-30.5" Opening, Carbon Steel Galvanized
    Price: $288.00
    Availability: In Stock
    Usually ships within 1-2 Business Days

      The A Series Self-Closing Industrial Safety Gates by Fabenco are an effective and easy-to-install passive fall protection solution for industrial and commercial settings. These self-closing safety gates feature a highly durable stainless steel spring that automatically closes the gate after each swing, providing near-continuous protection from leading edge falls. The A Series is made from carbon steel, but is also available in aluminum and stainless steel for special applications and...

      Ships Free!
      Fabenco, #A71-24 Self-Closing Safety Gate A36 Carbon Steel...
      A71-24, Fits 25-27.5" Opening, Carbon Steel Galvanized
      Price: $288.00
      Availability: In Stock
      Usually ships within 1-2 Business Days

        The A Series Self-Closing Industrial Safety Gates by Fabenco are an effective and easy-to-install passive fall protection solution for industrial and commercial settings. These self-closing safety gates feature a highly durable stainless steel spring that automatically closes the gate after each swing, providing near-continuous protection from leading edge falls. The A Series is made from carbon steel, but is also available in aluminum and stainless steel for special applications and...

        Ships Free!
        Fabenco, #A71-21 Self-Closing Safety Gate A36 Carbon Steel...
        A71-21, Fits 22-24.5" Opening, Carbon Steel Galvanized
        Price: $288.00
        Availability: In Stock
        Usually ships within 1-2 Business Days

          The A Series Self-Closing Industrial Safety Gates by Fabenco are an effective and easy-to-install passive fall protection solution for industrial and commercial settings. These self-closing safety gates feature a highly durable stainless steel spring that automatically closes the gate after each swing, providing near-continuous protection from leading edge falls. The A Series is made from carbon steel, but is also available in aluminum and stainless steel for special applications and...

          Leave a message