Specifically designed for the RV'er. OneStep utilizes Eternabond's advanced MicroSealant Technology with built-in primers and a specialized white UV stable backing. Perfect for all RV roof repairs and maintenance. Truly a one step process. Very little pre-cleaning necessary. Did you know RV roof seams require yearly maintenance? Use OneStep over factory roof seams one time and never do roof seam maintenance again! Lifetime warranty! More than 25 high-end RV manufactures now use EternaBond products in the manufacturing of their dream machines to ensure their customers will truly have a weather tight, leak-proof RV. Why not you too? OneStep will never shrink, crack, peel, or lose its grip. Comes in a handy resealable carrying case. Great for tank repairs.
For use on virtually all roofs, RoofSeal/OneStep Tape incorporates EternaBond’s advanced MicroSealant Technology and features a UV stable backing. It is available in White.
RoofSeal/OneStep is literally a one-step (with the exception of cleaning the surface), permanent repair system for roofs and roof accessories. RoofSeal/OneStep creates a waterproof, moisture and air tight barrier with no additional sealing required. RoofSeal/OneStep remains flexible to temperatures as low as -70°F making it virtually impossible to thermally shock the roof causing a leak.
RoofSeal/OneStep features EternaBond’s self-sealing advanced MicroSealant™ Technology, a sealant so advanced it permanently bonds to a wide range of surfaces including difficult roof materials such as EPDM, TPO, most PVC, CSPE/Hypalon, CPE, SBS, APP modifies, asphalt BURs, coal tar BURs, all metal roofs, tiles, shingle, aluminum, Galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB, etc.
Eternabond RoofSeal/OneStep Tape is used to seal roof joints (seams) and tears, flashings, copings, skylights, gutters, etc. Perfect for repairing and restoring roofs on mobile homes and RVs. Very flexible, RoofSeal/OneStep seals to itself so it can be cut and folded around an object, as if wrapping a present.
Eternabond RoofSeal/OneStep utilizes EternaBond’s advanced MicroSealant™ Technology, a 100% solids formulation of synthetic resins, thermoplastics and non-curing rubber (non butyl) with a built in primer, bonded to a tough UV stable backing. Designed not to harden under even the most rigorous conditions. Sag temp > 200ºF. MicroSealant™ is protected (while in a roll) by a tough, easily removed siliconized polymer release liner, which prevents contamination prior to its use. All materials are prefabricated to provide uniform thickness.
Standard roll size: 2", 4", 6", 8", 12", 24", 36" X 50’
Standard case quantity: 100 sq. ft. per case
Available widths: Up to 48"
Total thickness: RoofSeal: 35 mils (+/- 2 mils), RoofSeal PLUS: 65 mils (+/- 2 mils)
Adhesion: 20lbs+/in width
Low temp flexibility: Exellent
Application temp: >150°F to -25°F with optional primer
Temperature range: -70°F - >200°F
Pliability: No cracks in membrane
Water vapor test (ASTME 96B): .005 grms/100" sq./24hrs/100°F
Permanence: .001 perms maximum
Elongation: >700% +/- 100
Tensile break PSI: 4500 PSI +/- 500 PSI
Shelf life: Up to 5 years
Surface must be clean and dry; free of loose rust and scale, dust, talc, and dirt. Oil, grease, and other contaminants should be removed with a suitable solvent/cleaner. Use of EternaPrime reduces clean up. For older plastic roofs, score surface with sand cloth and wipe away dust.
Install Eternabond RoofSeal/OneStep over the repair area, removing the plastic release liner gradually to prevent contamination of the adhesive prior to application. Rub or roll with pressure with hand or steel roller to activate bonding process. This material may be applied to clean dry surfaces from 150ºF+ to -20ºF. Treat surface with EternaPrime for installations from 40°F to -20°F.