Price: $94.95
Item #CHE-F1280LVOC
Write a review!
Quantity:
Description
A solvent based liquid primer that is designed to comply with VOC regulations. It can be brush applied to EPDM or TPO roofing membranes, plastics, and any other difficult bonding surface.
Installation
Read SDS before use. Eliminate all ignition sources. DO NOT SMOKE. Mixing is not recommended, even when settling occurs. Do not thin. Thinning will affect performance. Clean debris from EPDM or TPO surface and wash with isopropyl alcohol. Brush apply the primer directly to the roof surface, starting at the base of the roof penetration, extending out a minimum of one inch beyond the perimeter of the ChemCurb/Ecurb on all sides. No streaks from primer starved areas should be visible. Allow the Low-VOC Primer to flash-off until it does not transfer to a dry finger touch yet remains tacky. Install ChemCurb/Ecurb according to application instructions. Coverage Rate - Approximately 700 ft²/gallon (65 m²). Only available through Chem Link distributors.
Product Features
- Shelf Life: 9 Months
- Shelf Complaint: Less Than 250 g/l
- Base: Synthetic Rubber
- Box of 4 cans
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
ChemLink, #F1263 DuraLink 35 Sealant White 10.1oz...
DuraLink 35 Sealant White 10.1oz
Price: $189.95
Availability: In Stock
Usually ships within 1-2 Business Days
F1263 ChemLink DuraLink 35 Multi-Purpose Sealant White 10.1oz Cartridge. ChemLink DuraLink 35 is a multi-purpose, moisture cure, elastomeric sealant that combines economy and high performance. DuraLink 35 has excellent elastomeric properties which is ideal for a wide range of applications including difficult surfaces such as Kynar 500%u00AE PVDF and other anodized metals and coatings. DuraLink 35 is isocyanate free, paintable and SWRI validated for %u00B1 35% joint movement.Bonds to Kynar...
![]()
New!
Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
Chemlink #1363GR 4.5”x 3.5” Rectangle E-Curb Kit
Price: $160.15
Availability: In Stock
Usually ships within 1-2 Business Days
E-Curbs seal penetrations by using a plastic mold and a pour-in-place polymer seal. E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing), and are specified for PVC, PIB, and TPO single-ply roofing membranes. The service temperature range for the E-Curbs is -40 F to 200 F, but should not be applied at temperatures below 32 F. This rectangular E-Curb was specifically designed to work with SnapNrack one-hole standoff kits and the SnapNrack HD...
R.M. Lucas 115 - Detergant Roof Primer
Lucas #115 is formulated from surfactants and alkaline cleaning agents.
Price: $45.80
Availability: In Stock
Usually ships within 1-2 Business Days
Pretreatment to all types of roofs prior to power washing. Lucas #115 is a detergent intended for application to all types of roofs prior to power washing. #115 lifts dirt and grease from the surface of the roof including small pores and irregularities. Lucas 115 cleaner is a concentrated blend of alkaline cleaners, surfactants and biocides intended for the cleaning and preparation of roofs prior to application of various roof coatings. APPLICATION Mix one part Lucas #115 with four parts...
12oz Asphalt Surface Primer / Surface Prep
12 oz. Aerosol
Price: $7.09
Availability: In Stock
Usually ships within 1-2 Business Days
Use Asphalt Surface Prep to prime metal and other surfaces to accept various asphalt-based membranes, and increase the bonding strength between the two surfaces. Fast Dry Formula, 12 oz. Can Means Less Waste. 1 can will cover 23 square feet. 12/case. Priced per can. Applications Include: Hot or Cold Applied Coating Cementitious Products Self-Adhesive Sheet Goods Any Surface Requiring PrimerUse On: Gutters Masonry Pipes Concrete Flashings Composition Roofing ...