Fall Protection Anchors

Ideal for metal and steel roofs, the 019-4006 permanent anchor features a special built-in energy absorber while offering a 360° working radius. The anchor can be used as a single anchor point or as part of a horizontal lifeline system. This anchor can also be used temporarily. FEATURES: Stainless steel construction360° working radiusBuilt-in energy absorber reduces stress & damage to the structureInstalls with 7, 8 mm Gesipa Bulb Rivets (included)Single User ...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work. Features: For use, strap loops around steel support beam or other compatible anchor and small D-ring...

Combo Safety Bar for 2×4 and 2×6 trusses The Safety Bar is a unique fall protection anchor for use while working with open truss situations. It spans 3 trusses and locks in securely with detent pins while gauging the trusses 24” on center. 2 users and tie off to the safety bar with the use of a shock absorbing lanyard or SRL’s. Our Safety Bar is the only product on the market for open framing fall protection and is used by framing crews across the country for OSHA compliance during the...

This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs. Available with a “Dual Hole”...

The EcoAnchor was developed in direct partnership with CHECKMATE, an industry leading fall protection manufacturer in the UK, now part of the Pure Safety Group family of companies effective June 2018. Guardian is excited to offer the innovative EcoAnchor, a water filled neoprene counterweight fall arrest anchor system. This anchor has been tested and approved on a wide variety of low slope roofs, weighs less than 17 pounds when empty, and comes with a specialized carrying case for stowing. It...

FallTech's Ringed Plate Anchor provides a temporary safety solution for workers performing work on building exteriors and roofs. Installed over a truss on the field of wood frame structures, the Ringed Plate Anchor serves as a single user point for personal fall arrest and restraint systems. The fallTech Ringed Plate Anchor is ideal for use during tasks such as painting, siding, roofing, window cleaning, or general construction Features: Temporary fall protection for residential and light...

The Guardian Fall Protection Ridge-It Anchor line is designed for use on wood rooftops. This Ridge-It model RIDG-1 is manufactured with a D-ring on one end and is 9—3/4" long, while the RIDG-2 is manufactured with 2 D-ring ends, and is 18" long. Ridge-It Anchors are composed highly durable stainless steel and zinc-plated steel, and are compliant with all applicable OSHA regulations. Ridge-It Anchors are easy to install, and are ideal for both residential construction and maintenance...

Why Standing Seam Roofs Are Different All types of structures use standing seam roofs, from commercial and residential buildings to industrial complexes. When you work on a standing seam roof, it’s not the same as working on other types of roofs. You’ll need to approach anchorage differently than other types of roofing. Working on a slanted roof requires careful concentration because it may be easier to fall. You also need to use a different type of anchor than for wood and concrete. The...

Single-Use roof anchor with nails features user fold-bend to fit roof peaks. Single-use temporary anchor can be removed or hammered down.  Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eyeIncludes 16D nails for roof ridge installation.For temporary use on wood structuresMeets OSHA 1926.502 regulations

This D-ring anchor is 5K rated and can be bolted or welded on. This anchor is a single point anchorage for steel applications. The design allows for free moving movement of D-ring after installation.FEATURES Designed for free movingMinimum tensile strength 5,000 lbsZinc plated steel D-ringForged steel plateOverall Dimensions .25″ x 2.00″ x 4.50″Bolt on free moving D-ring anchor for steel applications Materials: Zinc plated steel D-ring; Forged steel plateWeight :1.20 lbs (0.54 kg)Weight...

Are you dissatisfied with the anchor points currently on the market, which cause serious damage to the standing seam panels with their primitive and cumbersome design? Some gouge the panels, and others are limited to a few panel profiles! We’ve revolutionized the industry of anchor points, with our well-designed and engineered Universal Safety Anchor! Previous anchor points are now obsolete by eliminating the following problems: No More- Adjusting set screwsReplacing partsSet screws gouging...

The Guardian Fall Protection Cross Arm Strap is a reusable anchorage connector that can be used in a variety of fall protection applications. To use, loop over a steel support beam or other compatible anchor, and pull the small D-ring through the pass-through loop (or second, larger D-ring). Connect to the Cross Arm Strap D-ring with a compatible lanyard or SRL, and you are ready to work.Feature: Easy to installPass-through D-ring and loop modelsLightweight and durableMultiple lengths...

Fall Arrest rating for three workers and Fall Restraint for two. For Concrete applications, only 3 Workers for Fall Arrest and 2 for Fall Restraint. With the new job box and material rack, you will see safe and productive increases for your leading edge work. Includes Flat-Free Tires, 20 cf. Job Box (w/double door opening from the center) and a Material Rack. Additional 10 cf. job box and Raptor Alert available as an option. The TriRex was redesigned in 2011 from the ground up, based on...

The Guardian CB Anchor Point Install Screws comes in a bag of 40 and are used to install CB12 and CB18 anchorage connectors. These screws come in two different options: one for wood, and one for metal. Bag of 40 screwsWood and metal deck screws available#14-10 x 2" galvanized screws for wood

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.Metal Roof Installation: The minimum material thickness for steel decking is 22 gauage. Use twenty (20) #14-10, 2” hex-head self-drilling metal screws Wood Sheathing Roof Installation: The minimum...

The Standing Seam Roof Anchor(SSRA1) is a revolutionary product allowing homeowners, building owners, and contractors to work safely on standing seam roofs without penetrating the panels. Engineered to revolutionize fall protection anchorage attachment on Standing Seam Roofs! The patented, non-penetrating design of this life-saving device is unlike anything currently available. It consists of a solid 6061-T6 aluminum body with 12 stainless steel set screws and 12 nylon tipped stainless steel...

The 30° angle fixed length, factory engineered Horizontal Lifeline System is for use by 3 workers in fall restraint or 2 in fall arrest. This system is available in a 20’ kit with or without a carry bag. This 3rd party engineered horizontal line kit is a cost-effective way to have multiple workers on the roof with room to move freely. Engineering standards specify that a horizontal lifeline without an energy absorbing device subjected to fall hazards must have a 30° anchors between anchorage...

The Parapet Roof Anchor by Tie Down Engineering provides a parapet wall fall protection anchor for work on lower-level surfaces. This parapet clamp works with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Designed the Parapet Roof Anchor as the “go to” solution when roof penetration is not an option, these parapet wall roof anchors for fall protection feature a large easy-to-grip adjustment handle for quick set-up and proper securement. Tie Down Engineering maintains...

Features:  For temporary use in existing openings during construction stages where doors and windows are not yet installedNo tools required with simple clamp-in non-penetrating, non-marring installation.Features telescoping adjustment for openings from 21" to 51" wideLight weight extruded aluminum construction with durable steel clamping feetMeets OSHA 1926.502 regulations ...

Designed for production builders who want a robust anchor point during the framing and construction of the home but do not want to leave anything permanently attached to the structure. The decking is installed over the top of the anchor but the tie off straps stay exposed to the outside protecting all trades from fall hazards. It can also be utilized in a similar fashion to the Safety Bar. Here is how it works:Install the Truss Bar onto truss at predetermined locationsUse for fall protection...

Weld-on D-Ring Anchor with Unplated Installation Plate Features: Forged D-ringPlain/Uncoated Steel Plate for Weld-on or Bolt-on ApplicationsCan be installed wherever weld-on applications are preferredProvides Simple Overhead Anchorage SolutionFor use on steel I-beams, columns and other steel structuresHeavy-duty steel construction2" x 4-1/2 plate with 1/2" holes Anchorage Location:  Select a suitable anchorage point that will support the strength requirement and minimize free fall and...

Screw #14-10 x 2" - Gal- bag of 30 ct. - self-sealing, hex head for wood application. Guardian Fall Protection Screws For Wood Application For use with the Guardian Skyhook and CB Roof Anchors.

The Guardian Fall Protection Truss Boss Anchor Kit provides everything required for the set-up of a premium roof truss anchor. In addition to a non-corrosive Truss Boss Anchor, this kit also includes waterproof flashing for both composite and tile roofs, and also an anchor cap specially designed to protect the Truss Boss from weather, as well as to not blow off in high winds. The included Truss Boss can be installed on the truss while the truss is still on the ground for additional safety, and...

The 3-Foot Concrete Web Anchor Strap with Loop and D-Ring is constructed using heavy-duty 1-inch polyester webbing with a 1-5/8-inch polyester wear tube installed to prevent damage from abrasion. It is an excellent temporary anchor for use in new concrete construction, which can be cut off and discarded when work is completed. The looped end attaches to rebar prior to pouring, and is ready to use after curing. It is ideal for shear walls, columns, etc. and can be used on both vertical and...

The new Falltech Chain Roof Anchor, is a highly portable and reusable anchor to be used on residential and commercial wood structures.  The Anchors O-Ring serves as the attachment point for either a PFAS or on HLL system. With it's heavy steel anchoring plates and flexible belted rubber center, the Chain Roof Anchor can be installed either on the ridge or on the field of a roof and may be used on flat or pitched surfaces. The Anchor is Easily installed with nails as a Single-Point anchor...

The Parapet Wall Anchor installs easily onto existing parapet walls with no need for any additional tools or penetration of the wall surface. Suitable anchor point connection for work positioning or descent off a building roof or as the anchor point in your personal fall arrest system. Features:  Accommodates concrete parapets 2.36″ (6cm) to 14.17″ (36cm)Easy installation method for high productivityHigh strength steel constructionPortable and reusableBuilt-in tie-off D-ringNon-penetrating...

The Tie Down Two-Way Standing Seam Roof Anchor is able to fit most brands as well as styles of standing seam roofs. It is completely reusable and designed to be completely reversible allowing for seams up to 1 in. Designed to not cause damage and for one person single tie off as well can be used with retractable lanyards, vertical lifelines, and shock absorbing lanyards. Moving and storing on the job site is easy due to the compact size. Fall protection anchors are to be used in a horizontal...

The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated steel construction means longer lasting product life. Supplied with all necessary fasteners.Key Features:● Meets OSHA 1910, OSHA 1926 Subpart M, and ANSI A10.32-12● Can be installed with screws or nails● Fits up to 12/12 roof pitch● Fasteners provided● For temporary use on wood rooftops● Worker...

The PitchPro is a premier fall protection anchor designed for sloped-roof asphalt shingle construction. The PitchPro is the perfect solution for both new and existing construction, and its low-profile installation makes it an excellent choice for permanent applications. Its oversized connection point makes attaching and detaching easy and bind-free. Made from robust powder-coated steel, the PitchPro resists damage from repeated installations, and ensures the longest possible lifespan....

The anchor can be installed as a retro/reroof application or in new construction on low- and high-profile tile and slate roofing material. This is a double D-ring anchor that measures 40” in between the D-rings which allows them be exposed just under the last course of tile. The unique design does not require a conventional flashing system because the anchor does not penetrate the sheeting. It installs with 8 spiral shank stainless steel nails and includes a butyl flashing strip to provide a...

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors. Bag of 40 screwsWood and metal deck screws available#14-14 x 2" galvanized screws for metal

Complete System Includes Cart, Ballast Weights, and Pivot Plates Newly Redesigned, New Lower PriceThe PR 600 mobile anchoring system provides fall protection for up to 3 people, with 2 for fall arrest and 1 for fall restraint. The system is now lighter and easier to assemble and disassemble. The reduction in weight also makes the system easier to lift over ducts and piping that may lay over the roofs work surface. The component parts can even be taken up to the roof in an elevator. Uses:...

The Moveable ARS Anchor follows the same design principles as our ARS Permanent Roof Anchors. This is designed for the framing tradesmen that need a quick, easy anchorage connector for their lanyards, lifelines or SRL’s. Made from 11-gauge steel that is powder coated. Comes with a 3/8” stainless steel detent pin with elastic tether. Heavy Duty 11-gauge steel construction2 models cover 2×12 trussesStainless Steel locking detent pinRated for OSHA Fall ArrestPowder Coated for Durability Please...

The Guardian Screw-Down Metal Roof Anchor is a temporary and reusable anchor point, designed to be used with SRL's up to 50ft. in length. This anchor easily installs on Flat wood or Metal substrates, and allows for the attached SRL to rotate a full 360 degrees. Made from power-coated steel for increased durability.  Features: Can be used with most retractable lifelines up to 50ft. (or up to 65ft. in length if used in a combination with the retractable swivel adapter) Allows the...

Heavy-duty 1 3/4" polyester webbing with rugged forged alloy-steel hardware.3" wear pad protects primary webbing from cuts and abrasion.Ideal for I-beams and other properly rated structural members.Economical and lightweight.Can be used repeatedly.Meets the requirements of OSHA 1926 and ANSI Z359

SafeWaze Rivets for FrogLink Anchors 019-2005 & 019-2006  8 mm Gesipa Bulb Rivets

12 cup tipped set screws - consumable tip for permanent attachment of the SSRA to standing seam panels. Perfect for contractors that need to have extra cup tipped screws on hand in case of droppage or loss.

The D-ShakL anchor can be mounted onto various surfaces and used in numerous ways – it is truly a universal anchor point. It is a 360-degree use anchor. Unlike other anchors, our forged D-ring is captured on the shackle with a spot-welded plate. This keeps the D-ring united with the anchor at all times, especially during installation in tough situations. The anchor is only 4.5” x 2.0” and can be mounted on the exterior or interior of structures. It can be installed onto wood framing, concrete...

The Guardian Fall Protection Beamer 2000 is a versatile Fall Arrest anchor designed for use both overhead and at foot level. Attachable to both steel I and H beams, the Beamer 2000 offers Nylon bushings to provide smooth movement along the beam, that also function as impact indicators in the event of a fall. This extremely durable anchor also includes a precision machined aluminum bar and ratcheting end pieces, which allow for quick and easy adjustment with just one hand. When used at foot...

Self-drilling metal screws for use on the Guardian Skyhook and CB Roof Anchors.

The Guardian Fall Protection Concrete Swivel Anchor is specially designed to include a visual indicator that allows the user to clearly see when it is installed correctly (when proper torque is reached, the red cap will break away to display a green cap). This anchorage connector is composed of galvanized steel, making it capable of functioning in a variety of rough environments, and rotates 180° to allow for increased mobility.Features:  Easy to installVisual indicatorPivots and swivels...

Designed specifically for the Metal Building industry, our Super Z-Purlin provides an easy to install anchorage device that includes attachment bolts. The stem height of the anchor is compatible with high rib roofing panels and blanket type insulation. Waterproofing is achieved using a high quality E.P.D.M. gray colored flashing boot and matching stem cover that has an aluminum flange allowing it to be configured easily to any shape panel. The anchor stem features a collapsible design that...

The Guardian Fall Protection CB-1-B is a 6" x 6" bolt-on anchor for wood, steel, and concrete applications, and is permitted for use in combination with horizontal lifelines. This anchor is composed of steel, and is powder-coated for additional durability. It may be used in either vertical or horizontal installation applications. Fasteners not provided.Features: Easy to installCan attach to steel or concrete surfaces.Lightweight and DurableDee ring rotates 180 degrees.Permanent or temporary...

Malta Dynamics 6’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Manufacturer instructions before using this product

Permanent Truss Anchor Features 10-3/4" stainless steel post with 11/16" connecting eyeIncludes weather resistant post cap with zip-tie and 10" roof flange.4D stainless steel nails included for installation on wood roof trussesMeets OSHA 1926.502 regulationsInstalls on roof truss members 2 x 4 or largerKit includes weather flashing and capDurable Stainless steel construction for long lifeMay be installed before or after installation of roof sheathingAll fasteners included ...

The SafeWaze 360° Roof Anchor is a temporary and reusable fall protection-anchor point, offering a full 360° working radius. Built for use on wood roofs and installs in seconds with the provided fasteners. • 360° Working radius• Zinc Plated Steel (Base), Painted Steel (Connection Point)• (6) 1/4” x 3” in Stainless lag screws for wood installation• Weight capacity: Single person - 310 lbs.(Including person, tools, and materials)• Minimum strength 5,000 lbs.• Meets:OSHA...

Malta Dynamics 4’ Cross Arm Strap includes a heavy-duty wear pad and reinforced stitching. This heavy-duty wear pad protects the structural webbing against abrasion. Each strap includes both a large D-ring and a standard D-ring for easy pass-thru. This beam strap is designed to be among the safest on the market. Please read and understand the manufacturer instructions before using this product