Roofing Job Type

Heavy duty design with 9 HP overhead valve Honda engine Cuts 15 inch patch with 30 carbide tipped pins on 4 inch diameter solid steel drum Drum rotation provides self propulsion Adjustable cutting depth Easy access to drum assembly for maintenance through the top service door Safety splash guards for operator protection

2 inch thin wall tubing Used with 1-1/2 inch threaded nipple

The Razer Tear Off Machine is a powered roofing tear-off machine designed to remove existing roofing materials down to the roof deck. It uses an 11 hp Honda electric-start engine and a hydrostatic transaxle for smooth, reliable power. The machine features an adjustable blade made of hardened special alloy steel and a heavy-duty frame with industrial precision bearings. Its low center of gravity supports improved stability during rooftop tear-off operations. Key features: • Hydrostatic...

The A & A Melters A-110 Hot Rubber Melter is a 100-gallon capacity air-jacketed kettle designed for heating and processing rubberized asphalt and similar materials for roofing and crack-sealing work. Its oil-free, air-jacketed design eliminates the need for heat-transfer fluids, helping reduce cleanup and simplify operation. This unit offers a durable fire tube and insulation system, rapid heat-up, and portability options that accommodate movement through standard doorways and into elevated...

DURACHUTE’s™ new In-House Manual Winch adds an additional level of safety, reducing chute installers need to reach ”out of house” to grasp the winch crank when raising or lowering the chute. Safe and easy to both assemble and use, the manual winch easily installs the DURACHUTE™ debris chute system. Available in both 150′ and 80′ lengths.The winch consists of winch roller bar, winch frame, winch, support arm, winch picking bar, five 5/8″ bolts and 2 frame support brackets with caps. Winch...

50' Chute Kit Counter Weights(50 lbs) - Item # 441-0320, QTY: 13 Sections (Chutes)(37 lbs) - Item # 441-0300, QTY: 17 Basic Support Frame(69 lbs) - Item # 441-0310, QTY: 1 Intake Hopper(63 lbs) - Item # 441-0301, QTY: 1 Winch 80'(71 lbs) - Item # 441-0321, QTY: 1Choose Outrigger based on Roof Type Total Weight: 1,482 lbs (without Outrigger) 80' Chute Kit Counter Weights(50 lbs) - Item # 441-0320, QTY: 16 Sections (Chutes)(37 lbs) - Item # 441-0300, QTY: 27 Basic Support Frame(69 lbs)...

The RACE Fixed Roof Bracket is a rigid scaffold bracket configured at a 45° angle, suited for use on steep (12/12 pitch) roofs. It is rated to support one worker and a load of materials in compliance with staging guidelines. The bracket features rounded corners to minimize shingle damage and requires experienced handling and adherence to fall protection rules. Key features: Fixed 45° orientation for steep roof (12/12 pitch) use Rounded corners to reduce shingle damage Rated for one worker plus...

The A-40 hot rubber melter from A&A Melters is a compact, under-fired air-jacketed kettle for heating rubberized asphalt and similar materials. It supports small-scale roofing and crack-sealing tasks where a portable, quickly heated melter is needed. This unit’s oil-free, high-temperature insulation and stainless-steel fire tube help minimize heat-transfer fluids and reduce operator burn risk during rooftop work. Its size allows it to fit through standard doorways or into elevators for jobsite...

The A & A Melters HMP-50 Hot Material Packer is a 50-gallon insulated carrier made to transport and maintain the temperature of hot roofing material in areas where a kettle cannot be placed. It’s built as a standalone unit and is designed to be lifted into elevated or tight-access locations, including rooftops, using a crane. Optional factory modifications are available to convert the unit into a material applicator. Key Features Fully insulated shell to retain material temperature during...

The A-60 hot rubber melter from A&A Melters is a 60-gallon, air-jacketed kettle for heating and melting rubberized asphalt and similar roofing materials. It’s sized for mid-range commercial roofing and crack-sealing jobs, offering a balance of capacity and portability for work that’s larger than small service tasks but below heavy-production needs. This melter uses oil-free air-jacketed construction with a stainless-steel fire tube to deliver heat efficiently without heat-transfer fluids....

The A & A Melters HMP-100 Hot Material Packer is a 100-gallon insulated carrier engineered to transport and maintain the temperature of hot roofing materials into locations where traditional kettles cannot be used. Its fully insulated vessel helps preserve material heat during movement and placement. This unit is crane-compatible for efficient delivery of hot material to elevated or confined work areas such as rooftops or hard-to-reach spaces. Key Features 100-gallon insulated container for...

The A-210 hot rubber melter from A&A Melters is a high-capacity, air-jacketed kettle for heating and melting rubberized asphalt and similar roofing materials. With a 200 gallon capacity, it is intended for large-scale roofing and crack-sealing applications where continuous material throughput is required. This unit uses an oil-free air-jacketed design and stainless-steel fire tubes to help prevent charring and simplify maintenance. Standard agitator and burner options support consistent mixing...

The A-380 hot rubber melter from A&A Melters is a heavy-duty, trailer-mounted kettle with a 360-gallon capacity for heating and melting rubberized asphalt and similar roofing materials. It is built for large-scale roofing, crack sealing, and waterproofing operations that require continuous material throughput. This unit features an oil-free air-jacketed design and durable stainless-steel fire tubes to help reduce charring and simplify cleanup. Standard agitator and burner configurations...