Roofing Job Type

'The Work Horse', Devours Anything in its Path Removes: Asphalt, fiberglass, asbestos, slate, cedar and tin 48" Length The Blade: Wide-base hardened steel alloy grasps under more of the materials being removed thus allowing you to salvage reusable materials

The Shingle Eater 6126 Original is an American-made roofing tear-off tool designed for asphalt shingle removal. It features a 55-inch handle that provides reach and leverage, along with a 10-inch wide footplate equipped with 10 corrugated steel teeth that help remove shingles and nails efficiently. Weighing 7.4 lbs, the tool is built with durable all-steel construction, a heat-tempered foot plate, and a powder-coated finish for long-term performance. It is designed to deliver reliable results...

This medium duty folding trash chute section is crafted from lightweight, high density polyethylene that is weatherproof and durable. It ships flat and assembles with included chains, bolts, washers, and nuts. Sections sleeve together and are joined with zinc-plated chains. Each unit offers approximately 3'9" usable length and fits a 30" diameter. Ideal for short-term use where portability and easy setup are priorities. Key features: Lightweight HDPE construction Ships flat, easy assembly...

The AJC 118-DD Double Dipper Shingle Remover is designed for high-efficiency roofing tear-offs, combining durability, leverage, and operator comfort. Its 20-inch serrated blade is built from heavy-duty steel, delivering aggressive cutting and prying power to remove shingles, nails, and roofing materials with ease. The dual-handle design with poly D-grips gives contractors maximum leverage and control, reducing fatigue while increasing productivity. Built to handle demanding job site...

This 5 ft metal flex hose is listed as a kettle accessory for roofing equipment. It includes a 1½-inch male fitting on one end. The item is shown with product number 277-1015 on the Big Rock Supply page. Key features: 5 ft length Flexible metal hose construction 1½-inch male fitting on one end Roofing kettle accessory Listed as item 277-1015

The Shingle Eater 6127 Steep Slope is an American-made roofing tear-off tool designed for use on steeper pitched roofs and for users under six feet tall. It features a 46.5-inch handle and a 10-inch wide footplate equipped with 10 corrugated steel teeth. The tool is finished in OSHA Safety Yellow and built with all-steel construction meant to support asphalt shingle removal. Key features: 46.5-inch handle tailored for steeper pitched roofs and users under six feet tall 10-inch wide footplate...

The ACRO 26906 Roof Bracket is a contractor-grade support bracket set at a 90° angle, equipped with a 16″ back plate for use with structurally sound 2×6 lumber planks. Designed for safety and durability, it includes four offset nail slots—exceeding OSHA’s requirement—to prevent upward movement, a robust back-stiffening rib to resist twisting and flexing, and smooth, rounded edges to protect hands and roof surfaces. The powder-coated safety-yellow finish improves visibility and holds up under...

The ACRO 19700 Johnny Jack Offset Roof Bracket is a specialized staging solution for steep-pitch roofing installations involving interlocking materials such as slate, tile, metal shingles, and asphalt. Featuring a 7‑foot flat bar that offsets the walking surface from the attachment point, it delivers a safe, accessible work platform with 5½‑in surface clearance—keeping anchor screws exposed and reachable. The system folds compactly to 48″ for convenient transport and storage, and its...

This adjustable slaters bracket offers six locking positions and a 10" platform. It is built from heavy-duty galvanized steel and can be repositioned and taken down without damaging shingles. The bracket folds flat for transport and features a replaceable 3-position tongue. Key features: 6-position locking adjustments Heavy-duty galvanized steel construction 10" platform Folds flat for storage and transport Replaceable 3-position tongue ...

The RACE Roof Cutter is engineered for roofing professionals to deliver precision cutting powered by a 13 HP Honda engine. It incorporates shock absorber technology to reduce vibration and user fatigue. The machine includes a self-adjusting pivoting blade guard and heavy-duty blade shaft for durability. Key features: 13 HP Honda engine for consistent cutting power Shock absorber system to minimize vibration Heavy-duty blade shaft assembly built to withstand abuse Triple-wide, easy-change...

The ACRO 26606 Roof Bracket is a contractor-grade support bracket set at a 60° angle, featuring a 16-inch back plate optimized for use with structurally sound 2×6 lumber planks. It is engineered with four offset nail slots, surpassing OSHA’s three-slot minimum, providing resistance against upward shift. The bracket includes six long welds and a back-stiffening rib to resist twisting and flexing, plus smooth rounded edges that protect hands and roofing surfaces. Its durable powder-coated safety...

The RACE 1½ in Hammer-On Union is a full-cast fitting built to withstand pressures up to 2000 psi. It follows the standard Figure 200 style and is designed for reliable wrench-type installation. This durable union is suited for heavy-duty connections in piping and kettle systems. Key features: Full-cast construction Rated to 2000 psi Standard Figure 200 style Designed for hammer-on / wrench installation 1½ in nominal size ...

15" stem length Wood handle and clip

The Shingle Eater 8126 Renovator Tall Demo Eater is an American-made roofing tear-off and demolition tool designed for heavy duty use. It features a 55″ angled handle for leverage and control, and a 10″ wide footplate with 10 corrugated steel teeth and a 90-degree weld angle for enhanced striking and prying power. Reinforced with gussets and built to manage multiple layers of shingles, rotten decks, or jobsite surprises, this tool is engineered to slide under materials and improve efficiency....

The ACRO 26904 Roof Bracket is a contractor-grade, 90° support bracket with a 16-inch back plate, designed specifically for use with structurally sound 2×4 lumber planks for roofing staging. It includes four offset nail slots—exceeding OSHA’s requirement for three—to prevent upward slipping, six extended welds and a back-stiffening rib to resist twisting or flexing, and a welded gusset for added strength. Finished with smooth, rounded edges to protect hands and roofing surfaces, and...

The ACRO 26456 Roof Bracket is a contractor-grade, 45∘ angled support bracket with a 16" back plate, designed for use with sound 2×4 or 2×6 lumber scaffolding planks. It enhances safety with four offset nail slots—a number that exceeds OSHA’s requirement of three—to prevent upward sliding. For structural integrity, the bracket features six long welds and a back-stiffening rib to resist twisting and flexing under load. Its smooth, rounded edges are specifically designed to protect both the...

The ACRO 29606 Roof Bracket is a rugged, contractor-grade support designed at a 60° angle with a generous 19″ back plate tailored for use with structurally sound 2×6 lumber. It exceeds OSHA safety standards with its four offset nail slots to prevent upward slippage, supplemented by six long welds, a back-stiffening rib, and welded gusset to reinforce structural integrity. With rounded, smooth edges that protect both hands and roofing materials and a high-visibility, powder-coated safety-yellow...

Welded steel hopper stands up to punishment and provides 42” x 42” depository (shipping weight 200 lbs.)

Light weight and equipped with 5.5 HP Honda GX160 engine Ideal for cutting jobs around tight and hard to reach areas such as air conditioners and vents Will fit under objects at least 16" above roof surfaceMakes close cuts to skylights, parapets, etc. 12 inch blade with two carbide tipped cutters for longer blade life Shipping weight 155#

The ACRO 74000 Pour Can is a rugged and ergonomic roofing accessory engineered for precise application of liquid materials such as tar, adhesives, and asphalt sealants. Featuring a large 4-gallon capacity, it ensures multiple pours between refills. The rigid 4-inch steel nozzle rotates between horizontal and vertical orientations, allowing accurate, narrow-strip delivery in tight or awkward locations. Constructed with corrosion-resistant materials and a durable finish, this pour can increases...

The Shingle Eater 6128 Short & Narrow is an American-made roofing tear-off tool engineered for tight or steep areas such as small garages, between peaks, or near gutters. It features a 36.5-inch handle and a 7-inch wide footplate with 7 corrugated steel teeth to help remove shingles and nails in confined spaces. Built with 100% all-steel construction and finished in OSHA Safety Yellow, it offers durability and maneuverability for specialty roofing tear-off scenarios. Key features: 36.5-inch...

Hot Pipes thin wall tubing provides a lightweight 2-inch tube option designed for use with 1½-inch threaded nipples. It offers a consistent diameter and smooth interior for easy assembly. Available in multiple lengths for different installation needs. Key features: 2-inch thin wall tubing design Compatible with 1½-inch threaded nipples Smooth interior for consistent assembly Available in 5 ft, 10 ft, 15 ft, and 20 ft lengths ...

The Shingle Eater 6130D Steep Slope D-Handle is an American-made shingle removal tool designed for steeper pitched roofs. It features a 46.5-inch length and a steel D-handle grip built to give better leverage, combined with a 10-inch wide footplate equipped with 10 corrugated steel teeth for effective shingle and nail removal. The tool is built with rugged all-steel construction, designed to slide easily under shingles and deliver accurate tear-off performance. Key features: 46.5-inch handle...

Heavy duty construction pays special attention to detail, performance, reliability and minimum maintenance Standard 12" carbide blade included Adjustable cutting depth control handle

The ACRO 29456 Roof Bracket is a robust, contractor-grade 90° support bracket with a 19-inch back plate, designed for use with structurally sound 2×4 lumber. It features four offset nail slots—exceeding OSHA’s minimum requirement—plus a welded gusset and back-stiffening rib to resist twisting and flexing. With smooth, rounded edges to protect hands and roofing surfaces and a powder-coated safety-yellow finish for visibility and durability, this bracket installs and removes cleanly without...

Has a 36" wide poly-steel brush w/convenient 3-position control for brush angles that is spring-loaded with gates for positive positioning of brush from straight to right or left. Floating power brush design assures positive bristle contact with all surfaces for more efficient cleaning and longer brush life. Interlinked power controls automatically disengage whenever the operator’s hands are removed from the handle. Honda 5.5 HP engine.Weight: 250 lb. ...

Heavy duty design with 11 HP overhead valve Honda engine Adjustable cutting depth Equipped with heavy duty flanged block bearings for longer machine life Cuts 14 inch path with 4 carbide tipped cutters mounted on solid steel circular plate Cuts close to walls, gravel stops, roof edges, etc. Safety splash guards for operator protection

This versatile machine is designed to accept different attachments such as a gravel bucket, dumper tray or 55 gal. hot tank. Equipped with balloon tires on a wide wheel base Powered by a 5.5hp Honda engine. The wheels and gears are direct chain drive equipped with a brake. Brake automatically engages for safety whenever the operator’s hand leaves the control.

The RACE Adjustable Roof Bracket is a steel staging bracket with a 10-inch platform and selectable angles of 30°, 45°, 60°, or 90°. It supports one worker per 8 feet of bracket spacing or up to 250 pounds of materials. The bracket must be nailed securely to roof rafters using all mounting slots for proper installation. Key features: 10" platform with adjustable angle settings Four positions: 30°, 45°, 60°, 90° Steel construction for durability Rated for one worker or up to 250 lbs of material...

The Shingle Eater 8130D Demo Eater D-Handle is an American-made shingle removal tool designed for renovation and heavy tear-off jobs. It features a wide steel D-shape handle (over 6″ wide) and a 53″-54″ length steel pipe grip for enhanced control and leverage. The footplate comes with 10 corrugated steel teeth and a reinforced fulcrum with a 90° strike angle, built to slide under shingles and deliver higher prying force. Its approximately 8.5 lb weight is balanced to optimize sliding and...

REPLACEMENT PART for the winch picking bar for all DURACHUTE™ winches. For use when a DURACHUTE Winch is not being used 4,000 lbs. Maximum Load Weight: 13 lbs.Dims: 33 x 4 x 1 in

The Model #101 Bucket and Carrier gently transports hot stuff to where you are mopping. Features- Rubber wheels Bucket detaches from handy tubular steel carrier Carrier features mop handle support Bucket capacity: 8 gallons

Designed for hauling and unloading debris. Workhorse attachments can easily be changed over in minutes.

The RACE 1½ in Ward Union is a standard-wrench union sized for kettle and plumbing connections. It is constructed of malleable iron with a brass and iron seat to provide a secure, durable seal. The union uses a black finish and is suited for Class 150 applications. Key features: Standard wrench-type union design Made of malleable iron with brass/iron seating Black finished body for corrosion resistance Designed to join two pipe ends securely Suitable for kettle and plumbing fitting...

The ACRO 29608 Roof Bracket is a contractor-grade, 60° angled support bracket with a generous 19″ back plate, specifically designed for use with structurally sound 2×8 lumber planks. It includes four OSHA-compliant offset nail slots to prevent upward slippage, reinforced with six long welds, a back-stiffening rib, and a welded gusset to provide exceptional strength and resistance to twisting or bending. The bracket’s smooth, rounded edges protect hands and roofing materials, and its...

The ACRO 29908 Roof Bracket is a contractor-grade support bracket set at a 90° angle, featuring an extended 19″ back plate designed for structurally sound 2×8 lumber planks. It includes four offset nail slots—surpassing OSHA’s minimum specification—for secure attachment. Built for robustness, it incorporates a back-stiffening rib and welded gusset to resist twisting and flexing. Smooth, rounded edges safeguard hands and roofing surfaces while allowing shingle-safe installation and removal. The...

The Model #25 Big Bucket reduces the number of refills needed to finish the job, with its large 25-gallon capacity. T-bar handle, tubeless pneumatic tires and oilite bushings all add up to time-saving maneuver- ability. Dangerous flash fires are reduced by specially designed wind deflector shield.

Protective Liners are clipped to the inside of plastic debris chute sections and add an additional layer of thickness to the section, which extends the life of the chute section itself. It is used when particular heavy debris may be thrown, when there may be slight bends in the chute system which creates a specific area of impact, or if sharp-edged objects may be disposed down the chute. The protective liners are made of the same high quality. HDPE plastic material as our sections and come...

The ACRO 2″ × 10″ 90° Roof Bracket with 19″ back length is a heavy-duty, contractor-grade staging support designed to hold structurally sound 2×10 lumber planks. It exceeds OSHA standards with four offset nail slots that prevent upward slippage and is reinforced with a back-stiffening rib, six long welds, and a welded gusset for maximum strength. Smooth, rounded edges protect both workers and roofing materials, while the safety-yellow powder-coated finish ensures high visibility and resistance...

The ACRO 29904 Roof Bracket is a contractor-grade 90° support bracket with a 19″ back plate designed for use with structurally sound 2×4 lumber planks. It includes four offset nail slots that exceed OSHA’s three-slot requirement, ensuring secure placement and preventing upward slippage. Reinforced with six long welds and a back-stiffening rib, the bracket resists twisting and flexing while maintaining structural integrity. Smooth, rounded edges protect roofing surfaces and workers’ hands,...

The RACE Fixed Roof Bracket is a rigid scaffold bracket designed to mount perpendicular (90°) to the roof surface for staging and slide guard use. It is intended for roofs with pitches between 4/12 and 6/12 and must be spaced no more than 8 feet apart when used as part of a slide guard system. The bracket is built for experienced tradesmen and requires appropriate fall protection and compliance with OSHA standards for use. Key features: Fixed 90° orientation to roof surface Designed for slide...

Heavy duty design with 5.5 HP overhead valve Honda engine Cuts 4-1/2 inch path with 8 carbide tipped pins on 4 inch diameter solid steel drum Easy access to drum assembly for maintenance through the safety cover Adjustable cutting depth Ideal for repair work around gravel stops, expansion joints, and flashing Drum rotation provides self propulsion Safety splash guards for operator protection ...

Hopper retainer bars are added to the intake hopper when used in intermediate positions. The retainer bar allows other sections to sleeve into the intake hopper safely. The galvanized bar comes complete with four 5/16″ bolts, washers and locknuts. Add to Intake Hopper When Used in Intermediate Positions Includes Four (4) 5/16” Bolts, Four (4) Washers and Four (4) Locknuts Weight: 2 lb. Dims: 21 x 32 x 1 in ...

Features: Come complete with operator safety fence Easy to set up; provides a safe holding system for trash hopper and chutesComes complete with 12 counterweights Hopper and trash chute sections are not included and are sold separately Maximum number of trash chutes allowed for the system: 16 Sections * Hopper and Trash Chutes Sold Separately *

The patented DURAFLAT™ Converter is used to attach the DURAFLAT™ Flat Chute Sections to any of DURACHUTE’s™ outriggers via the Basic Support Frame. The converter comes complete with all necessary chains, hooks, nuts and bolts. It is 36″ in diameter. Converts the two chain attachment from the Intake Hopper to a three chain attachment for use with the plastic folding chutes. Weight: 46 lb.Dims: 36 x 36 x 5 in

When job site conditions require containment of dust particles due to building occupancy or confined areas, DURACHUTE’s™ Dust Gaiters provide additional debris containment. Dust gaiters simply slip on, between chute sections, to stop small dust and other particles from escaping from between the sections. Used to Help Contain Dust Particles in Confined Areas and Occupied Buildings Fits Between Sections Weight: 1 lbs. ...

Gravel spreader attachment for workhorse power unit7.5 cu. ft.

DURACHUTE’s™ safety flap can be added, using the included bolts, washers and locknuts, to the hopper retainer bar. The flap stops debris from exiting the chute at intermediate intake locations. The flap comes pre-drilled with 3 bolts, washers and locknuts for quick and easy attachment to the hopper retainer bar. Add to Intake Hopper When Used in Intermediate Positions Includes Three (3) 5/16” Bolts, Three (3) Washers and Three (3) Locknuts Weight: 10 lbDims: 32 x 37 x 1 in  ...