- Contractor-grade roof bracket set at a 90∘ angle (supports 2×4 lumber).
- Features four offset nail slots (exceeding OSHA minimum) to prevent upward slippage.
- Reinforced with a welded gusset and 19-inch back plate for maximum durability and strength.
- Supports one worker + 40 lb of materials per 4-ft staging span when correctly spaced.
Price: $17.45
Item #404-29456
Write a review!
Description
The ACRO 29456 Roof Bracket is a robust, contractor-grade 90° support bracket with a 19-inch back plate, designed for use with structurally sound 2×4 lumber. It features four offset nail slots—exceeding OSHA’s minimum requirement—plus a welded gusset and back-stiffening rib to resist twisting and flexing. With smooth, rounded edges to protect hands and roofing surfaces and a powder-coated safety-yellow finish for visibility and durability, this bracket installs and removes cleanly without damaging shingles. When spaced properly, it supports one worker plus up to 40 lb of materials per 4-ft span, making it both safe and reliable for jobsite staging.
Key Features:
• Four offset OSHA-compliant nail slots for anti-slippage
• Reinforced with back-stiffening rib and welded gusset for added strength
• Smooth rounded edges guard against injury and protect roof surface
• Clean installation/removal preserves shingles
• Supports one worker and up to 40 lb per 4 ft span when spaced correctly
Specifications
• Model: 29456 – 19″ Roof Bracket, 90° angle, back support
• Compatible plank: Structurally sound 2×4 lumber
• Nail slots: Four offset slots exceeding OSHA standard
• Reinforcements: Back-stiffening rib, welded gusset
• Load capacity: Supports one worker plus up to 40 lb per 4-ft staging span
• Recommended spacing: Maximum 8 ft between brackets
• Finish: Powder-coated safety yellow for high visibility
How To
- Position the bracket on the roof slope, secured over structural substrate.
-
Insert nails through the four offset slots into the roof deck for placement.
-
Confirm that the bracket is level and firmly seated.
-
Place a structurally sound 2×4 plank into the heel of the bracket.
-
Arrange additional brackets at intervals of no more than 8 ft and lay planks across to form staging.
-
Inspect the staging platform for stability before use.
FAQs
Q: What type of plank is compatible with this bracket?
A: It is designed to support structurally sound 2×4 lumber planks.
Q: How many nail slots are included and why?
A: There are four offset nail slots, exceeding OSHA requirements to prevent bracket slippage.
Q: Will using this bracket damage roofing materials?
A: No—the smooth edges of the bracket allow for clean installation without harming shingles.
Q: What is the recommended spacing for safety?
A: Brackets should be spaced no more than 8 ft apart when staging with 2×4 planks.
Q: What load can be supported per bracket?
A: Each bracket supports one worker plus up to 40 lb of materials per 4-ft span.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
ACRO - Roof Bracket 90°, 2" x 8" 19" Back Length, 29908
The ACRO 29908 Roof Bracket provides durable 90° support for 2×8 planks, featuring OSHA-compliant nail slots, a reinforced design, and a powder-coated yellow finish for visibility and safety.
Price: $18.70
Availability: In Stock
Usually ships within 1-2 Business Days
The ACRO 29908 Roof Bracket is a contractor-grade support bracket set at a 90° angle, featuring an extended 19″ back plate designed for structurally sound 2×8 lumber planks. It includes four offset nail slots—surpassing OSHA’s minimum specification—for secure attachment. Built for robustness, it incorporates a back-stiffening rib and welded gusset to resist twisting and flexing. Smooth, rounded edges safeguard hands and roofing surfaces while allowing shingle-safe installation and removal. The...
ACRO - Roof Bracket 60°, 2" x 6" 19" Back Length, 29606
For use with a sound 2 x 6" plank CONTRACTOR GRADE
Price: $17.45
Availability: In Stock
Usually ships within 1-2 Business Days
The ACRO 29606 Roof Bracket is a rugged, contractor-grade support designed at a 60° angle with a generous 19″ back plate tailored for use with structurally sound 2×6 lumber. It exceeds OSHA safety standards with its four offset nail slots to prevent upward slippage, supplemented by six long welds, a back-stiffening rib, and welded gusset to reinforce structural integrity. With rounded, smooth edges that protect both hands and roofing materials and a high-visibility, powder-coated safety-yellow...
ACRO - Roof Bracket 60°, 2" x 8" 19" Back Length, 29608
For use with a sound 2 x 8 in. plank CONTRACTOR GRADE
Price: $18.70
Availability: In Stock
Usually ships within 1-2 Business Days
The ACRO 29608 Roof Bracket is a contractor-grade, 60° angled support bracket with a generous 19″ back plate, specifically designed for use with structurally sound 2×8 lumber planks. It includes four OSHA-compliant offset nail slots to prevent upward slippage, reinforced with six long welds, a back-stiffening rib, and a welded gusset to provide exceptional strength and resistance to twisting or bending. The bracket’s smooth, rounded edges protect hands and roofing materials, and its...