ACRO - Roof Bracket 90°, 2" x 4" 16" Back Length, 26904

The ACRO 26904 Roof Bracket is a contractor-grade, 90° support bracket with a 16-inch back plate, designed specifically for use with structurally sound 2×4 lumber planks for roofing staging. It includes four offset nail slots—exceeding OSHA’s requirement for three—to prevent upward slipping, six extended welds and a back-stiffening rib to resist twisting or flexing, and a welded gusset for added strength. Finished with smooth, rounded edges to protect hands and roofing surfaces, and powder-coated in safety yellow, the bracket installs and removes cleanly without damaging shingles. It supports one worker plus up to 40 lb of materials per 4 feet of staging when spaced correctly, combining safety, durability, and ease of use.

Key Features:
• Four offset OSHA-compliant nail slots prevent bracket slippage
• Reinforced with six long welds, a stiffening rib, and a gusset for robust performance
• Smooth, rounded edges protect workers and roof surfaces
• Installs and removes cleanly without shingle damage
• Supports one worker plus up to 40 lb per 4 ft when installed at proper intervals

• Model: 26904 – 2″ × 4″ Roof Bracket at 90° angle, 16″ back plate
• Compatible plank size: Use with standard 2×4 lumber
• Nail slots: Four offset slots exceeding OSHA minimum
• Structural reinforcements: Six long welds, back-stiffening rib, welded gusset
• Finish: Powder-coated safety yellow for visibility and corrosion resistance
• Load capacity: One worker + 40 lb of materials per 4 ft of staging
• Installation spacing: Place brackets no more than 8 ft apart
• Weight: (Not specified—refer to spec if needed)

• Position the bracket on the roof slope at desired staging location over structural decking.
• Drive nails through all four offset slots into deck substrate.
• Ensure bracket is level and securely engaged.
• Place a straight 2×4 plank into the bracket’s heel for stable staging.
• Position additional brackets at intervals no greater than 8 ft and lay planks across to form staging.
• Confirm stability before loading or stepping onto platforms.

Q: What plank size is this bracket designed to support?
A: It is engineered for use with structurally sound 2×4 lumber planks.

Q: How many nail slots are provided and why are they important?
A: It includes four offset nail slots, exceeding the OSHA minimum of three and preventing upward sliding.

Q: Does this bracket damage shingles during use?
A: No—its smooth edges and careful design allow clean installation and removal without harming roofing materials.

Q: What spacing is recommended for staging safety?
A: Maximum spacing is 8 ft between brackets when used with 2×4 planks for proper staging support.

Q: How much load can each bracket safely support?
A: Each bracket supports one worker plus up to 40 lb of material per 4-ft staging span.