Tramex CRH-KIT1 Concrete Slab Moisture & Humidity Test Kit

A Complete Kit measures Moisture content, Relative Humidity, Temperature and Dew Point in concrete and gypsum flooring. Contains a CRH Moisture and Humidity Meter with Software and PC Cable, Two Relative Humidity Probes, RH Probe Calibration Check Solution with Sleeve, Pack of twelve RH Sleeves, and optional instant read Infrared Surface Thermometer. Use to perform ASTM F2170 and ASTM F2420.

The world’s most advanced MOISTUREand RELATIVE HUMIDITYMeter for the flooring industry,the Tramex CRH measures MOISTURE CONTENT, RELATIVE HUMIDITY, TEMPERATURE and DEW POINT in concrete and gypsum flooring.

The CRH Moisture/RH meter enables you to carry out 4 individual tests: 1 Measure non-destructively and instantly the moisture content in concrete and gypsum flooring 2 Measure the relative humidity,temperature and dew point within the floor slab or screed using the (below surface) In-situ method 3 Measure the relative humidity,temperature and dew point above the surface of the floor slab or screed using RH hood test methods 4 Measure the relative humidity,temperature and dew point of the environment that the floor is being installed The CRH allows you to carry out the most appropriate tests

HOW DOES IT WORK
In MOISTURE MEASURING MODE it uses the principle of electrical impedance measurement to give accurate non-destructive moisture readings in concrete and gypsum floor screeds. From Electrodes with special spring mounted probes on the base of the instrument,a low frequency signal is transmitted into the material being tested to measure the electrical impedance. In HYGROMETER MODE it uses a solid state capacitive sensor RH probe to give accurate and fast relative humidity and temperature readings. While being easy and uncomplicated to operate the CRH has a powerful micro controller,which processes the information received and accurately calculates the moisture content,relative humidity,temperature and dew point and displays it on the clear digital display.It has a high capacity non-volatile memory chip which stores and retains its data.This information can be recalled at any time by scrolling and reading directly from the instrument’s own display or downloaded to a PC for storage and inclusion on spread sheet or report.

FEATURES

Two versatile measuring modes,measures moisture content plus relative humidity,temperature and dew point with plug in RH probe

User can switch between moisture meter and hygrometer modes

Non-destructive moisture measurement

Stores up to 900 recorded readings in 30 files

Recorded readings can be recalled and displayed on dot matrix LCD

Download recorded reading to pc for transfer to word processing or spread sheet

Choice of scales to suit different types of floor slabs and screeds

Operates on time proven impedance measurement principle

Instant readings on clear LCD display

NEED FOR THE CRH
Excessive moisture in concrete floor slab and screeds can lead to a host of problems in all types of floor coverings such as:adhesive degradation,delaminating of the floor covering from the slab and within itself, condensation,blistering,movement and deterioration of the covering.In the case of wood flooring,excess moisture can lead to swelling,cupping and movement of the wood which can lead to floor failure and even structural damage.Excess moisture can also lead to mold,and mildew as well as the emission of harmful vapours.Most of these problems can be related to the floor covering being installed on a sub floor that is not sufficiently dry.It is therefore important to insure that the floor slab or screed is sufficiently dry enough to accept a covering.