Price: $965.00
Item #TRAMEX-MRH3Hi1
Write a review!
Description
This is a complete kit for moisture and humidity measurement of the building envelope.
It incorporates 3 modes of operation.
The MRH is a digital display multi featured version of the popular Tramex Moisture Encounter Plus meter. It non-destructively measures percentage moisture content in wood but incorporates a switchable specific gravity adjustment covering wood SG’s of 0.3 to 0.8. Like the MEP it provides relative/comparative readings deep into most building materials such as Dry-wall, Roofing, Brick, Ceramic tile etc.
Plug in WPIE with Hammer Probe to give accurate moisture readings in wood from 7 to 40%.
Plug in reusable Relative Humidity Probe for Relative Humidity, Temperature, Dew-Point and Mixing Ratio readings. This RH probe is for measuring ambient conditions or for performing In Situ (ASTM F2170) or RH Hood (ASTM F2420, BS 5325:2001 & BS 8203:2001) methods.
Instant Readings in non-destructive and wood probe modes
5 scales in non-destructive mode including percentage moisture content in wood
Measures from 7% to 40% Moisture Content in Wood using the plug in WPIE and Hammer Probe with insulated pins.
Reusable Relative humidity probe provides clear digital display with simultaneous reading for Humidity in both (%RH) and grains/lb. or grams/kg. in addition to Temperature and Dew Point for measuring ambient conditions.
Reusable Relative Humidity probe can also be used for sub-surface In-Situ method (ASTM F2170) or Non-Destructive Hood Method (ASTM F2420)
Complies with BS Standard BS5325:2001 and BS 8203:2001 for above surface readings of RH, Temperature and Dew Point readings.
Detachable 0.4" (10mm) diameter stainless steel RH Probe.
Intelligent RH Probe can be recalibrated. (Traceable to NIST and international standards.)
"Hold" feature freezes reading on display.
Battery Operated (Supplied)
Die cut foam case allows for addition of Optional extras such as Hand Probe with insulated deep-wall pins, infra-red surface thermometer and a second Tramex moisture meter.
Specifications
The Complete Moisture and Humidity Meter
The complete instrument for moisture and humidity testing
incorporating 3 modes of operation.
Digital Non-Destructive meter for measuring moisture content...instantly...
in a wide variety of construction materials.Includes specific gravity on wood
scale from 0.3 to 0.8.
Plug in Wood Probe to give accurate moisture readings in wood from 7 to 40%.
Plug in Humidity Probe for Relative Humidity,Temperature,Dew-Point and
Mixing Ratio readings.
Excess moisture in buildings and construction
materials can cause numerous problems including
material damage,mold growth,environmental
damage and even structural damage.
Moisture testing makes sense and it can be done
easily with the MRH meter for moisture and humidity
measurement of the building envelope.
MRH Non-destructive moisture testing mode
The MRH is a digital display version of the Tramex Moisture Encounter MEP hand-held electronic
impedance moisture meter.It operates on the principle of non-destructive impedance
measurement.Parallel co-planar electrodes are mounted on the base which,during operation,
transmit a low-frequency electronic signal into material under test.
To carry out moisture tests simply press the MRH firmly against the surface being tested and take a
reading.There’s no surface damage and no waiting.The MRH has 5 different measurement scales:
Wood,Roofing,Masonry,Drywall and Laminate.The MRHmeasures percentage moisture in wood
when using the Wood Scale.All other scales and readings are comparative.
WOOD MOISTURE PROBES Pin-type resistance meter mode.
When the Tramex Wood Probe Interface Electronics (WPIE) is plugged into the MRH,it
automatically changes to Wood Probe Mode.TheTramex Hammer Probe HA25
(supplied as standard) or the Hand Held Probe HH15 can then be plugged in to the WPIE to
take precise measurements of moisture content in wood and wood products.Using built-in pins,the
WPIE and probes are easy to use,extremely accurate,giving readings in 0.1% increments over the
entire measurement range.
Readings are displayed on the LCD of the MRH.The WPIE and probes offer a most practical and
accurate way of determining that wood is at the correct moisture level for its intended use,proving
to be a vital tool for good quality control of wood flooring and other wood applications.
RELATIVE HUMIDITY (RH) PROBE Hygrometer Mode
When theTramex RH Probe is plugged into the MRH,it automatically changes to Hygrometer
Mode.The Tramex RH Probe provides the ideal solution for the measurement
of Humidity,Temperature and Dew-point in structural materials such as concrete flooring,walls
etc as well as the environmental conditions within the building or structure.Humidity readings
are displayed in both Percentage Relative Humidity (%RH) and mixing ratio (grains/lb or grams/kg).
The solid-state capacitive sensor in the RH probe gives accurate,fast results.
Allows testing of concrete slabs using the In situ (ASTM F 2170) or RH hood (ASTM 2420,BS 5325
& BS 8203) methods.
The standard MRH Kit comes in a carrying case with die-cut foam lining and contains the following:
MRH,Wood Probe Interface Electronics (WPIE),Slide Action Hammer Probe and a Relative Humidity
Probe.The MRH,accessories and all other Tramex meters can be purchased separately.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!