Price: $63.50
Item #MIR-5-RAH-8
Write a review!
Description
The MIRO 5-RAH-8 is a rooftop roller pipe support built for 5 in. nominal pipe up to 5.6 in. outside diameter. Its adjustable roller height from 2.75 to 7 inches provides flexibility for different clearance requirements while ensuring smooth pipe movement for thermal expansion. The durable polycarbonate base distributes loads evenly without roof penetrations, helping protect membranes and extend roof service life.
Key Features:
-
supports 5 in. nominal pipe up to 5.6 in. OD
-
adjustable clearance range from 4 in. to 8 in.
-
roller design allows smooth axial thermal expansion and contraction
-
non-penetrating polycarbonate base protects roof membranes
-
backed by a 20-year limited warranty
Specifications
- Model / SKU: 5-RAH-8
-
Pipe capacity: up to 5 in. nominal; maximum OD 5.6 in.
-
Adjustable clearance: 4 in. 8 in.
-
Base dimensions: approx. 14 in. × 18 in.
-
Footprint area: approx. 252 sq. in.
-
Materials: UV-stable polycarbonate base, polycarbonate roller, galvanized hardware
-
Load rating: up to 242 lb per support (evenly distributed static load)
-
Recommended spacing: up to 7 ft on center depending on pipe size and load
-
Design: non-penetrating, adjustable roller stand, accommodates pipe expansion
How To
- plan pipe run and determine required clearance height.
-
clean and level roof surface at installation points.
-
place the 5-RAH-8 base on the roof aligned with the pipe route.
-
adjust the roller height between 4 in. and 8 in. as needed.
-
set pipe onto the roller cradle, ensuring smooth axial movement.
-
repeat along the run, spacing supports up to 7 ft on center.
-
verify alignment, stability, and load distribution across all supports.
FAQs
Q: what pipe size does the 5-RAH-8 support?
A: it supports 5 in. nominal pipe with outside diameters up to 5.6 in.
Q: what is the adjustable clearance range?
A: the roller height can be adjusted between 4 in. and 8 in.
Q: does the base penetrate the roof?
A: no, the polycarbonate base is non-penetrating and rests directly on the roof.
Q: how much weight can each unit support?
A: each 5-RAH-8 supports up to 242 lb of evenly distributed static load.
Q: does the roller allow for thermal expansion?
A: yes, the roller design permits pipes to move freely as they expand or contract.
Reviews (0) • Write a review!
This product has no reviews yet. Write a review!
MIRO 4-RAH-14 Roller Pipe Support - Supports Pipes up to...
The MIRO 4-RAH-14 Pipestand offers adjustable rooftop pipe support with a roller-bearing design for smooth thermal movement and roof protection. Adjustable 4.5" to 14"
Price: $54.65
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 4-RAH-14 is an adjustable rooftop roller support built for 4 in. nominal pipe with up to 4.5 in. outside diameter. With an adjustable clearance range from 4.5 to 14 inches, it provides greater elevation flexibility while allowing pipes to move freely on a low-friction roller. Its durable, UV-stable polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof system life. Key Features: supports 4 in. nominal pipe up to 4.5 in. OD...
MIRO 3-RAH-8 Roller Pipe Support - Adjustable 3.875" to 8"...
The MIRO 3-RAH-8 Pipestand that is adjustable 3.875" to 8". Heightprovides adjustable-height roller-bearing support for rooftop piping systems, reducing stress on membranes.
Price: $33.00
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 3-RAH-8 is an adjustable rooftop roller pipe support designed for gas, conduit, or mechanical piping requiring height flexibility. With an adjustable clearance range of 2.75 to 8 inches, it accommodates thermal expansion while maintaining stability and roof protection. The polycarbonate base and roller system provide a non-penetrating, load-distributing solution for flat and low-slope roofs. Key Features: adjustable clearance range from 3.875 in. to 8 in. supports axial pipe movement...
MIRO 3-RAH-12 Roller Pipe Support - Adjustable 3.875" to...
The MIRO 3-RAH-12 Pipestand offers durable, adjustable-height of 3.875" to 12" roller support for rooftop piping systems, minimizing membrane stress.
Price: $36.00
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 3-RAH-12 is an adjustable rooftop roller pipe support designed for gas, conduit, and mechanical piping that requires higher clearance. With an adjustable roller height from 5.25 to 12 inches, it ensures proper spacing while accommodating thermal expansion. Its polycarbonate base distributes loads evenly without roof penetrations, protecting membranes and extending roof life. Key Features: adjustable clearance range from 3.875 in. to 12 in. supports axial thermal pipe movement with...
![]()
Clearance!
MIRO 6-RAH-8 Roller Pipe Support - Supports Pipes up to 6"...
The MIRO 6-RAH-8 Pipestand supports up to 8.5" pipes with adjustable elevation and a high load capacity from 4.375" to 8". ideal for rooftop mechanical systems.
Price: $99.95
Availability: In Stock
Usually ships within 1-2 Business Days
The MIRO 6-RAH-8 is a rooftop roller pipe support engineered for 6 in. nominal piping with outside diameters up to 8.5 inches. Its adjustable roller height from 4.375 to 8 inches allows flexibility for rooftop clearances while enabling free axial thermal pipe movement. With a UV-stable polycarbonate base and roller system, this non-penetrating support protects roof membranes while handling heavy-duty mechanical and HVAC piping loads. Key Features: supports 6 in. nominal pipe up to 8.5 in. OD...