A "roller-bearing" pipe support used to support roof-mounted gas pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing damage to the roof membrane. Pipes rest on a self-lubricating polycarbonate resin roller rod and roller. The pipe support base is made of polycarbonate resin, the supporting all-thread and all metal parts are made of stainless steel. Pipestand will accommodate up to 3" pipe (inside diameter) or up to 3 3/4" (outside diameter) pipes.
Base Material: Polycarbonate
Size: The deck base is 7.50" by 10" and has a maximum cradle width of 4".
Max Pipe Size: 3" inside diameter and 3.75" outside diameter.
Max Pipe Clearance: The 3-RAH can adjust in height from a low of 2.75" to a high of 7" in elevation above the roof membrane.
Max Load Weight: Maximum load weight may not exceed 100 lbs. per pipestand.
Spacing: Manufacturer's recommended spacing is not to exceed 10 foot centers depending upon the load. Do not exceed 100 lbs. load weight.