Everhard MR02150 - 2 in. x 2 in. Steel Radius Roller

The MR02150 pairs a polished, radius-edge steel wheel with a sturdy offset frame to deliver firm, even pressure without leaving sharp track lines. The rounded profile helps the roller glide cleanly over laps, step-downs, and transitions, while enclosed bearings keep the action smooth for consistent seam consolidation on TPO, PVC, and EPDM systems.

Key Features

• 2″ diameter × 2″ wide polished steel radius roller minimizes edge/track marks on membranes
• High, uniform compression ideal for long runs, overlaps, and transition areas
• Offset single-fork steel frame keeps hardware clear of the contact path for precise tracking
• Enclosed precision bearings for smooth, long-life operation with reduced chatter
• 5″ ergonomic handle (cushion/soft-grip style) provides control and knuckle clearance near walls and corners
• Balanced weight for steady passes without excess fatigue
• Jobsite-ready construction engineered for daily professional roofing use
• Made in the USA to Everhard’s professional standards

Roller Diameter: 2″ (50.8 mm)

Roller Width: 2″ (50.8 mm)

Roller Profile: Radius (rounded edges to minimize track/edge marks)

Roller Material: Polished solid steel

Frame/Fork: Offset single-fork steel frame for clear tracking

Bearings: Enclosed precision ball bearings

Handle: 5″ soft-grip (cushion) handle with knuckle clearance

Overall Length (approx.): ~8.5″

Weight (approx.): ~1.8 lb (0.82 kg)

Origin: Made in USA

• Grip the 5″ wood handle firmly to maintain control of the roller.
• Place the steel roller across the membrane seam or area you wish to press.
• Roll forward with smooth, even pressure to consolidate the seam.
• If needed, roll backward over the same path to reinforce adhesion.
• Keep the roller aligned to prevent it from shifting off the seam line.
• After use, wipe off any adhesive, dirt, or residue from the roller surface.
• Store the roller in a dry, protected place to preserve the steel and bearings.

Q: What is the MR02150 designed for?
A: Applying firm, even pressure on single-ply seams (TPO, PVC, EPDM) and transitions to help achieve strong, uniform adhesion.

Q: Why a radius (rounded-edge) steel roller?
A: The radius profile reduces sharp track/edge marks as you roll over laps and step-downs, while solid steel delivers concentrated compression and tactile feedback.

Q: What are the key size, weight, and materials?
A: The wheel is 2″ diameter × 2″ wide, polished solid steel, on an offset steel frame with enclosed ball bearings and a 5″ soft-grip handle; overall length ~8.5″; weight ~1.8 lb (0.82 kg).

Q: Any usage or care tips?
A: Use steady, even passes; avoid striking fasteners; keep the wheel/bearings clean; and store the tool dry to maximize service life. Made in the USA.