Everhard Products

Built for clean, controlled pressure in tight detail areas, the MR05020 pairs a compact silicone roller with a durable frame to deliver uniform, non-marring results on single-ply membranes and flashing. Its smaller width excels along seams, upstands, and corners, while the smooth-rolling bearings help you track straight lines without chatter or scuffing.Key Features Non-marring silicone roller — resists heat and common roofing solvents while protecting finished surfaces. Compact size for...

A time-saving combo tool that lets you roll and immediately test your seam without swapping tools. The MR05032 pairs a heat-resistant silicone roller with a built-in seam tester so you can verify weld integrity in one continuous pass. Its extended offset fork improves line-of-sight and keeps your hand farther from the heat source, while the cushion-grip handle and smooth bearings deliver steady, low-drag rolling on TPO, PVC, and EPDM.Key Features All-in-one roller + tester: Roll the seam, then...

Everhard MR05028 Ergonomic Silicone Roller This compact, non-marring silicone seam roller is built for precise work on single-ply membranes and flashing. The extended offset roller keeps hardware out of the contact path for smoother tracking and better visibility along edges, upstands, and tight detail areas. A cushioned, ergonomic handle reduces hand fatigue while precision bearings help deliver uniform pressure and a professional finish.Key Features 1-7/16 in diameter × 1-3/4 in width...

Purpose-built for fast, clean cuts in common insulation materials, the MK46000 pairs a sharp, rigid blade with a comfortable molded handle so you can size batts, trim duct wrap, and score foam board without tearing or crumbling. Lightweight yet tough, it’s the dependable jobsite knife you reach for when you need straight lines, square edges, and tidy cutouts.Key Features Sharp, rigid blade designed to slice fiberglass/mineral wool batts and score/cut rigid foam boards (EPS/XPS/polyiso) with...

The MM21034 Premium Convertible Seam Tester is a versatile, American-made tool designed to give roofing professionals ergonomic comfort and flexibility. Its ability to convert between handheld and stand-up use, combined with a safe seam probe, makes it excellent for installers needing both precision detail and broader seam inspection capabilities.Key Features Dual-purpose functionality—portable handheld test probe or pole‑mounted stand‑up tool for efficient inspection across large membrane...

The Everhard MR05029 is a high-quality, U.S.-made silicone roller optimized for right-handed roofers. Its heat-resistance, ergonomic handle, extended offset fork, and smooth bearings make it a top-tier tool for precision seam finishing, especially under hot-air applications.Key Features Ergonomic Advantage: Extended offset fork provides greater knuckle clearance—reducing wrist strain and enhancing visibility in confined or angled work areas  Right-Handed Design: Tailored specifically for...

Designed for fast, reliable field inspections, the Check-N-Fold gives you a pro-grade seam probe that folds safely into a compact handle for pocket or belt carry. The radiused tip and angled geometry deliver clear tactile feedback without gouging, while the secure lockup and grippy handle keep you in control around laps, corners, and penetrations on TPO, PVC, and EPDM. It’s the seam tester you’ll actually keep with you—because it’s built to disappear in your pocket when the job moves.Key...

DC65990 are lightweight stainless steel bent shears designed for membrane and metal roofing work. They measure 10" in total length, with a cutting edge of 4¾″ . Key Features Durable yet light stainless‑steel build Offset (bent) blades for smoother flush cuts and better visibility Ideal for detail trimming and precision cuts on roofing membranesHot Drop Forged : Steel is heated and drop hammered into the forged shape.Hardened and Tempered : High quality, cutlery grade steel requires precision...

The MR05200 is engineered to keep your wrist in a neutral, comfortable position while delivering non-marring, uniform pressure along single-ply seams. Its Wrist-Saver offset geometry improves line-of-sight and knuckle clearance, so you can track straight runs and tight details with less fatigue. A compact silicone roller paired with smooth, enclosed bearings makes it a go-to tool for hot-air welding on TPO, PVC, EPDM, and similar membranes.Key Features Wrist-Saver offset design reduces...

The MR02150 pairs a polished, radius-edge steel wheel with a sturdy offset frame to deliver firm, even pressure without leaving sharp track lines. The rounded profile helps the roller glide cleanly over laps, step-downs, and transitions, while enclosed bearings keep the action smooth for consistent seam consolidation on TPO, PVC, and EPDM systems.Key Features 2″ diameter × 2″ wide polished steel radius roller minimizes edge/track marks on membranes High, uniform compression ideal for long...

Built for speed, control, and versatility, the MR05260 delivers broad, even pressure along long seams and transitions—then switches to stand-up operation when you need to cover distance. Its non-marring silicone wheel glides over TPO, PVC, EPDM, and similar membranes without scuffing, while the convertible handle setup lets you work handheld for detail work or add an extension for efficient, ergonomic rolling on long runs. Key Features 2″ diameter × 4″ wide silicone roller for faster coverage...

The MR05240 pairs a wide, non-marring silicone wheel with a rugged offset frame to deliver smooth, even pressure across laps, seams, and transitions. Built for hot-air welding work on TPO, PVC, EPDM, and similar membranes, it tracks cleanly without leaving scuffs, helping you achieve strong, uniform adhesion over longer runs and detail areas alike. Key Features 2" diameter x 2" wide silicone roller for broad, consistent pressure and faster coverage Non-marring, heat- and solvent-resistant...

Experience the power of precision with Everhard’s MK46300 Blade. Designed specifically for the demands of modern roofing, this insulation knife effortlessly cuts through thicker IsoBoard and other insulation materials. The blade is crafted from hardened and tempered high carbon spring steel. This provides a long-lasting edge that offers the perfect balance of rigidity and flexibility. Double-beveled on all three edges, the precision ground blade ensures consistent edge quality for a clean and...

The MM21100 is a hand-held membrane slitter specifically designed for cutting TPO and PVC roofing membranes quickly and precisely. It’s ideal for clean straight cuts and fast thermoplastic trimming on the job site.Key Features For TPO and PVC MembranesSimple operation: Bottom guide slides under membrane and forces membrane into cutting blade.Uses three-hole slitter blades: Blade safely mounted in secure housing. Easy to replace and rotate blade. Replacement blades available, item #...

Built for broad, even compression on long runs, the MR02090 pairs a 4″ wide polished steel wheel with a rugged frame and smooth, enclosed bearings. It tracks cleanly across laps, step-downs, and terminations, giving you the firm feedback of steel without chatter. A comfortable 5″ handle provides control and knuckle clearance near edges and walls, making this a go-to roller for TPO, PVC, and EPDM work. Key Features 4″ wide polished steel roller delivers strong, uniform pressure for faster...

Purpose-built for tight detail work, the MR13500 uses a lightweight, corrosion-resistant aluminum V-profile wheel that nests into inside corners, ribs, and channels where flat rollers can’t reach. The V shape focuses pressure right in the angle for crisp, uniform consolidation on single-ply membranes, while a rigid frame and smooth bearings keep tracking precise and chatter-free. Comfortable in hand and tough enough for daily use, it’s a go-to finisher for corners, step-downs, and...

Built for clean cuts through sticky materials, the DC65915 pairs Everhard’s SuperNonStick blade finish with a bent (offset) design for visibility and control. The coating helps shed adhesives, tape, and membrane residue, while hardened, precision-ground blades deliver a smooth, accurate cut across roofing membranes, flashing, peel-and-stick underlayments, and jobsite tapes. Key Features SuperNonStick blade finish reduces drag and buildup from adhesives, tapes, and sealants 10" overall length...

Built for smooth finishing with a wider contact line, the MR08580 uses a 1/4″ rounded (convex) steel wheel to deliver even pressure without imprinting sharp track lines. The curved edge lets you blend seams, patches, and step-downs cleanly, while a rigid frame and enclosed bearings keep the roll precise and chatter-free on TPO, PVC, and EPDM. Key Features 1/4″ rounded/convex steel wheel spreads pressure for faster blending and fewer visible edge marks Ideal for dressing long seams,...

Built to protect your go-to hand tools and keep them close at hand, the DM90100 is a rugged, jobsite-ready sheath for everyday roofing work. The durable, weather-resistant body shields edges and tips from damage (and pockets from accidental nicks), while the secure belt carry and reinforced construction stand up to daily climbs, kneels, and crawl-throughs. Use it to stage cutters, seam testers, small slitters, or other compact tools so you can move faster and work safer on the roof. Key...

The MR02140 delivers firm, even pressure for strong seam consolidation on single-ply membranes and flashing. Its 2″ diameter × 2″ wide polished steel wheel tracks cleanly along laps and transitions, while the offset frame and smooth, enclosed bearings help you apply consistent compression without chatter. Built for daily jobsite use, it’s a dependable choice when you want the feel and feedback of a solid steel roller. Key Features 2″ diameter × 2″ wide polished steel roller provides...

The MR05110 combines a wide, non-marring silicone wheel with a rugged offset frame to deliver smooth, even pressure across long seams, laps, and transitions. Built for hot-air welding and detail work on single-ply membranes, it tracks straight without scuffing, helping you achieve strong, uniform adhesion with fewer passes and less fatigue. Key Features 2″ diameter × 4″ wide silicone roller for broad coverage and consistent compression on long runs Non-marring, heat- and solvent-resistant...

Built for fast, clean cuts on single-ply roofing, Everhard’s MM21105 replacement blades keep your membrane slitter performing at its best. The industry-standard three-hole design drops into the MM21100 Slitter in seconds, and each blade can be rotated to extend service life—perfect for TPO and PVC trimming on the job.Key Features Purpose-built compatibility: Direct replacements for the Everhard® MM21100 Roofing Membrane Slitter. Industry-standard format: Three-hole slitter blades for quick...

Designed to make membrane cutting more ergonomic and efficient, the MM21110 allows you to cut both straight and curved lines while standing—no kneeling required.Key Features Best for installers handling large membrane rolls where kneeling is physically demanding. Ideal during long days of cutting TPO or PVC seams across commercial and industrial roofs. Excellent when pursuing professional finish lines—particularly for curved or scribed seams.Work while standing – At approximately 32″ tall with...

Built for everyday quality checks, the MM21031 gives installers and inspectors a reliable way to verify single-ply weld integrity, locate skips or voids, and confirm corners and terminations. A radiused probe tip delivers clear tactile feedback without gouging the membrane, while the angled profile and comfortable handle keep your knuckles clear and your line-of-sight on the seam. It’s lightweight, durable, and ready to live in your pouch for every walkthrough. Key Features Radiused,...

Purpose-built for quick, reliable quality checks on single-ply roofing seams, the MM21090 helps you verify weld integrity, locate skips or cold welds, and confirm terminations and corners. A radiused probe tip concentrates feedback without gouging, while the angled profile and grippy handle give you leverage and line-of-sight in tight spots. It’s a lightweight, jobsite-tough tool you’ll keep on your belt for every inspection. Key Features Radiused stainless-steel probe tip designed to probe...

Engineered for stability and smooth tracking, the MR02040 pairs a 2″ × 2″ polished, radius-edge steel wheel with a rigid double-fork frame. The radius profile helps the roller glide over laps, step-downs, and transitions without leaving sharp track lines, while the twin-fork design keeps the axle square under pressure for consistent, even compression. With enclosed bearings and a comfortable 5″ handle, it delivers reliable, repeatable results on TPO, PVC, and EPDM seams—day after day. Key...

The Everhard Utility Knife and Seam Tester is a combination tool that has a folding utility knife on one end and a folding seam tester on the other end. It has a comfortable, black, anodized aluminum handle that allows for easy use for anyone. The knife and seam on this roofing tool has a probe that locks into place when completely open, and when folded can be safely kept in a pocket, attached to a belt using the pocket clip, or carried in the belt sheath that comes with the tool. Key Features...

The Fairmont Offset Seaming Tong delivers precise control where straight tools can’t reach. Its offset handle geometry gives you knuckle clearance over raised seams, fasteners, and edges while the wide, flat jaws spread pressure evenly for crisp bends, tight hems, and seam-flattening without waviness. Built from forged steel with a corrosion-resistant finish, it’s tough enough for daily jobsite abuse and refined enough for shop-grade results on trim, flashing, and duct details. Key Features...

Built for stability and high, even pressure on long runs, the MR02100 pairs a wide 2″ × 4″ polished steel wheel with a rigid double-fork frame. The twin-fork support keeps the axle square under load so the roller tracks straight across seams, step-downs, and terminations. Enclosed bearings deliver a smooth, chatter-free feel, while the comfortable 5″ handle gives you confident control on verticals and edges. It’s a jobsite-ready workhorse for TPO, PVC, and EPDM applications where the firm...

Bring comfort and control to tight, awkward spots. The MT14030 combines Fairmont’s wide, flat jaws with an offset handle that gives you knuckle clearance over raised seams and fasteners, while the cushion-grip handles cut fatigue during repetitive forming. Uniform pressure across the jaws helps you make crisp bends, tight hems, and flatten seams without waviness—perfect for trim, flashing, coil stock, and duct details on the roof or in the shop. Key Features Offset handle design for better...

Keep your duct and insulation knife protected—and always within reach. The DM90070 is a slim, jobsite-ready sheath built to ride comfortably on your belt while shielding the blade (and your gear) between cuts. Tough fabric, reinforced stitching, and a low-profile design make it a dependable holster for daily HVAC and insulation work. Key Features Slim, belt-hang design keeps your knife accessible without bulk; sits flat against tool belts or pants. Reinforced construction with rugged,...

The MR02240 delivers concentrated, even pressure for stronger seam consolidation on single-ply membranes and flashing. Its compact 1-1/2″ diameter × 2″ wide polished steel wheel tracks straight along laps and detail areas, while the offset frame and smooth bearings help you roll long runs with control—and without chatter. Built for daily jobsite use, it’s a dependable choice when you want the feel and feedback of a solid steel roller. Key Features 1-1/2″ diameter × 2″ wide polished steel...

The MR12866 nylon cone attachment is an accessory that fits onto any Everhard silicone roller with a 1⅜″ diameter core. It converts your standard roller into a cone‑shaped roller, perfect for reaching tight corners, flashing edges, and other narrow areas where full-width rollers can't goKey Features Precision rolling: Tip down into tight corners and small detail areas without risk of membrane damage. Cost-effective: Convert your existing roller instead of buying multiple specialized...

Built to finish tight corners and change-of-plane details fast, the MR13115 puts two aluminum V-profile rollers on a single tool so you can switch tasks without swapping tools. The V shape nests neatly into inside angles, ribs, and step-downs, focusing pressure exactly where a flat wheel can’t reach. Lightweight, corrosion-resistant aluminum keeps fatigue low and heat transfer stable during hot-air weld finishing, while the rigid frame and smooth bearings deliver precise, chatter-free...

Designed for precise seam finishing with a touch more coverage than ultra-thin detail rollers, the MR08530 uses a 1/8″ rounded (convex) steel wheel to deliver controlled, even pressure without leaving harsh track lines. The curved edge lets you run right up to laps, transitions, and change-of-plane details, while the rigid frame and smooth bearings keep your passes steady and chatter-free on TPO, PVC, and EPDM.Key Features 1/8″ rounded/convex steel wheel for clean consolidation with minimized...

Built for precise forming and finish work, the Everhard MT14000 Fairmont Seaming Tong delivers flat, even pressure across the workpiece so you can create crisp bends, close hems, and flatten seams with confidence. Its broad, straight jaws give you control on trim, flashing, and detail work where a standard plier or hammer just can’t keep lines straight. Tough enough for daily jobsite use, yet refined for shop-quality results. Key Features Wide, flat jaws distribute force evenly for straight,...

Built for precision in tight corners and change-of-plane details, the MR13110 uses a solid brass V-profile wheel to deliver firm, even pressure exactly where flat rollers can’t reach. The V shape nests into inside angles, ribs, and step-downs to help you consolidate seams cleanly without scuffing adjacent surfaces. Paired with a rigid frame, smooth bearings, and a comfortable handle, it’s a go-to finisher for detail flashing on TPO, PVC, and EPDM. Key Features Brass V-profile roller focuses...

Built for versatility and control, the MR05270 pairs a compact, non-marring silicone wheel with a convertible, threaded handle so you can switch from precise hand work to comfortable stand-up rolling in seconds. The single-fork frame keeps hardware out of the contact path, while enclosed bearings deliver smooth, even pressure along seams, laps, and transitions on single-ply membranes. Key Features 2″ diameter × 2″ wide silicone roller for clean, uniform compression on TPO/PVC/EPDM seams. ...

Built for ultra-precise finishing, the MR08500 uses a super-narrow, 1/16″ rounded-edge wheel that reaches where standard rollers can’t. The curved edge helps you ride right up to a seam or change-of-plane without leaving hard track lines, while the slim profile concentrates pressure exactly where you need it. Smooth bearings and a rigid frame give you controlled, chatter-free passes on detail flashing for TPO, PVC, and EPDM. Key Features 1/16″ rounded-edge wheel focuses pressure into tight...

Built for control in tight spots, the Everhard MA74110 puts 3-inch offset jaws right where you need them—over raised seams, near fasteners, and along drip edges—so you can form crisp bends and flatten details without banged knuckles. It’s a rugged, jobsite-ready seamer for roofing trim work, flashing, and HVAC metal where straight-jaw tools can’t quite reach. Key Features 3" offset jaws provide knuckle clearance and visibility when working over standing seams, laps, and obstructions. Parallel...

Everhard MR02153 Wrist-Saver Steel Radius Seam Roller — 2" x 2" The MR02153 combines Everhard’s Wrist-Saver offset geometry with a 2" x 2" polished steel radius roller to deliver high, even pressure without edge marking. The radius profile helps the roller glide over laps, transitions, and step-downs while the offset frame improves line-of-sight and keeps your wrist in a more neutral position. Enclosed bearings and a cushioned handle give you smooth, controlled tracking for long runs and...

Built for high-pressure seam consolidation with less fatigue, the MR02143 pairs a compact 2" x 2" solid steel roller with Everhard’s Wrist-Saver geometry to keep your wrist in a more neutral, comfortable position. The polished steel wheel, smooth bearings, and offset frame help you track long runs and tight details with steady, even pressure—ideal for demanding single-ply work on TPO, PVC, and EPDM. Key Features Wrist-Saver offset design improves line-of-sight, knuckle clearance, and control...

*Left Handed Model Purpose-built for southpaws, the DC65925 combines Everhard’s low-drag SuperNonStick blade finish with a true left-handed, bent (offset) geometry. The mirror-ground blade orientation and offset handle give left-hand users a natural cutting stroke, better line-of-sight, and safer hand clearance over the work. Hardened, precision-ground carbon-steel blades stay sharp through roofing membranes, flashing, peel-and-stick underlayments, and jobsite tapes—while the release coating...

Purpose-built for simulated standing seam and ribbed membrane systems, the MR05180 uses two compact silicone wheels to deliver equal, uniform pressure along profile ribs. This helps you hand-weld precisely on decorative rib systems like Sika Sarnafil’s Décor Roof profiles—tracking cleanly without scuffing the membrane. Key Features Dual heat-resistant silicone rollers for uniform pressure and clean tracking along profile ribs.  Each roller measures 1-7/16″ diameter × 1″ wide for...

A robust sheath designed for snips and shears, the MM20200 keeps your tools secure and your belt organized on the job site. Universal fit: Spacious enough to hold a wide range of snips and shears — especially models like Everhard’s KDC9 or similar trimmers. Long-lasting protection: Uprated nylon material and rivet construction ensure resilience in outdoor and rough environments. Convenient & secure carry: Belt-ready design allows for easy, accessible tool storage at your hip. Key Features...

Everhard's convertible seam tester is a hand-held tool that can convert into a tool used while standing -- just screw the handle onto the threaded end of a 60" fiberglass handle. Key Features Convertible design – Easily switch between handheld probing and pole-mounted stand-up operation—ideal for finishing large areas while minimizing roof traffic. Safe and effective – Blunted probe and angled tip allow precise seam checking without penetration damage. Ergonomic and lightweight –...

Built for control and comfort, the MT14020 pairs Everhard’s flat, precision jaws with a cushioned, non-slip handle that keeps your hands fresh through repetitive forming. It distributes pressure evenly for crisp bends, tight hems, and seam-flattening on trim, flashing, and duct details—delivering shop-quality results on the jobsite. Key Features Cushion-grip handles reduce hand fatigue and provide confident, non-slip control—gloved or bare-handed. Wide, flat jaws spread force evenly for...

A compact, heavy-duty roller built for precise pressure where it matters most. The MR02200’s small 1" x 1" steel head delivers concentrated force along seams, terminations, and tight detail areas, helping ensure strong, uniform adhesion on demanding roofing work. Smooth rolling action and a comfortable, jobsite-ready handle make it easy to track straight lines without chatter. Features 1" diameter x 1" wide solid steel roller for high, focused compression in tight spaces Smooth, consistent...