OMG Roofing Products

OV1WAY is OMG’s one-way aluminum roof vent from the OlyVent line, designed to allow trapped air pressure within a roof system to escape via a rubber valve while preventing ingress of rain, snow or pests. Its wide base and conical design improve flashing details and make installation easier than standard cylindrical vents. Manufactured from heavy-gauge spun aluminum and fitted with a durable Duro-Nitrile rubber valve, this vent is suitable for various roofing types, including single-ply and...

The OMG Hercules Aluminum RetroDrains (SKUs HDAL3A, HDAL4A, HDAL5A, HDAL6A) are durable retrofit roof drains designed to replace existing drains in re-roofing projects without removing the existing drain fixture. Each drain features a one-piece spun aluminum body, heavy cast aluminum strainer dome, large flange for secure membrane attachment, and a U-Flow mechanical watertight seal that connects reliably to existing plumbing (PVC or cast iron). These drains meet multiple codes and standards...

The OMG 98700 Quick Connects (6-pack) are replacement/upgrade couplers for fluid adhesive systems like PaceCart, Adco Cart, or roof sprayers. They feature universal 38 mm threaded or snap-in necks, automatic flush valves to reduce spills, and durable materials for long-term reliability. Sold in a 6-pack to facilitate multiple machines or replacements, these quick connects help improve productivity and reduce setup time. Key Features universal 38 mm necks (threaded or snap-in) for broad...

The PGM-BK Mini PipeGuard from OMG (OlyFlow line) is a one-piece roof pipe support engineered to hold rooftop steel pipe, electrical conduit, or copper tubing with diameters between ½-inch and 1½-inch. It lifts the pipe 1½-inches off the roof surface to avoid damage, sagging, or strain, replaces wood blocks, and installs extremely quickly without tools. Made of weather-resistant EPDM, it is durable, resists UV and moisture, and supports loads up to 225 lbs. Key Features supports pipe diameters...

PGS-BK is the “Small” size of OMG’s PipeGuard line, designed to support rooftop steel pipe, electrical conduit, copper tube, or similar, ranging from ¾-inch to 2-inch in diameter. The device lifts the pipe 3½-inches off the roof surface to prevent damage, vibration, or strain, using a molded EPDM body that resists UV and weather. It installs quickly without tools via an integral clamp, offering durability and high load performance. Key Features supports pipe diameters between ¾-inch and 2-inch...

OB500PCT-PSKT is a replacement pump seal kit designed specifically for the OMG PaceCart 1 & 2 adhesive dispensing carts. It includes all the necessary seals and components to refresh or restore the pump’s integrity, helping to prevent leaks, maintain pressure, and ensure smooth, consistent adhesive flow. Ideal for routine maintenance especially when pump performance begins to degrade. Key Features full seal kit for pump of PaceCart 1 & 2 units helps prevent leaks and maintain pump pressure...

The PGL-BK is the large version in the OMG PipeGuard line, built to support rooftop steel pipe, copper tube, or electrical conduit ranging from 2½-inch to 5-inch in diameter. It elevates the pipe 3½-inches off the roof to help protect roof membrane from abrasion or water trapping, using a one-piece EPDM rubber body and an integral clamp so no tools are required. Rated for high loads and quick installation, it replaces wood blocks and offers a more durable and weather-resistant support. Key...

OB500LTS-1GAL is a storage fluid (PCPreserver) designed for long-term preservation of PaceCart adhesive dispensing equipment. It helps flush out residual OlyBond500 adhesive from pumps, hoses, and gun assemblies and lubricates internal parts during periods of non-use. The formulation is non-hazardous, very low VOC, and compatible with both Part 1 and Part 2 sides of the PaceCart system. Key Features enables long-term storage of PaceCart equipment without damage flushes adhesive residues from...

The U-Flow Screwdriver is a special-purpose tool by OMG designed to install U-Flow Seals for Hercules Retrofit Roof Drains. It features an extra-long shaft to reach recessed screws on the compression seals and includes a loss prevention bar so the tool is more secure during use. Its #2 Robertson square tip matches the low-profile, recessed head screws used in the U-Flow Seals. Key Features long 12.5-inch shaft for reaching deep screws in drain stems #2 Robertson square tip that fits the...

OV2WAY is OMG’s two-way breather roof vent in the OlyVent product line, designed to help manage both trapped air pressure and moisture within roofing assemblies. It features a Duro-Nitrile rubber valve, spun aluminum body, and wide base for effective flashing detail. The two-way design works together with one-way vents to improve ventilation and prolong roof system life in both single-ply and built-up roofing applications. Key Features allows release of trapped air plus evacuation of moisture...

The SCUPRD3, SCUPRD4, SCUPRD5, and SCUPRD6 models are part of OMG’s Scupper Thru-Wall RetroDrain product line. Designed to replace existing through-wall or side-wall drains in re-roofing applications, these drains provide a secure and watertight solution without requiring removal of existing plumbing. They feature a durable aluminum body, stainless steel hardware, a large pre-punched flange for flashing integration, and the proven U-Flow mechanical seal to connect securely to PVC or cast iron...

The OB213PUMP-SHAFT is the official replacement shaft for the pump in the PaceCart2 adhesive system by OMG. Designed to replace the original shaft when wear, damage, or bending causes reduced flow or leaks, this shaft helps restore pump performance and longevity. It is manufactured to OEM tolerances to ensure proper fit and alignment in the PaceCart2 pump assembly. Key Features OEM replacement shaft for PaceCart2 pump to restore performance manufactured to match original dimensions and...

OB500SSGUN-SU18V is the cordless stand-up power applicator by OMG for use with OlyBond500 SpotShot, NightShot, and fleece membrane adhesive cartridges. It uses 18-volt lithium-ion batteries for extended runtime, comes with fast charging, and is designed for ease of use on projects where mobility and speed matter. It dispenses adhesive in 12-inch on-center bands, with the bead rising about ¾- to 1-inch above the substrate; chemical cure takes about 10-15 minutes depending on temperature. Key...

OB500SS-R is the regular temperature SpotShot version of OMG’s OlyBond500 two-component polyurethane foam adhesive, supplied in 1,500 ml cartridge sets. It is designed for stand-up or hand applicators, ideal for smaller jobs, repairs, and hard-to-reach areas. The adhesive is fast-acting, low-odor, provides excellent rise and board adhesion, and cures in roughly 10-15 minutes depending on ambient conditions. Key Features regular grade formulation for temperatures 40 °F (4 °C) and above packaged...

OB500SSGUN is a SpotShot hand applicator designed for use with OlyBond500 SpotShot two-component cartridges. It is ideal for roof repairs, edges, or smaller jobs where a full-size dispensing cart isn’t practical. Lightweight and easy to maneuver, it delivers the correct 1:1 mix for adhesive cartridges ensuring accurate bead placement and consistent cure.Key Features designed for smaller jobs, repairs, edges, or hard-to-reach spots works exclusively with OlyBond500 SpotShot 1,500 ml cartridges...

PGTS-BK is the “Tall Small” size from OMG’s PipeGuard line, designed to elevate and support rooftop pipes, conduit, or tubing between ¾-inch and 2-inch in diameter, 6-inches off the roof surface. Constructed from heavy-duty EPDM rubber, it is durable, UV and weather-resistant, and includes an integral clamp so no tools are needed. Its wide base gives stability, and it’s engineered to handle substantial load while protecting the roof membrane. Key Features supports pipe sizes from ¾-inch to...

The HDTPO3A, HDTPO4A, HDTPO5A, and HDTPO6A models are Hercules series TPO-Flange RetroDrains by OMG, designed for retrofit roof drain projects under TPO membrane systems. They feature a one-piece spun aluminum body, a TPO-coated flange engineered for direct membrane welding, a watertight U-Flow mechanical seal to connect to existing PVC or cast iron piping, and cast aluminum strainer dome and clamping components for durability in harsh environments. These drains allow rooftop drains to be...

The OMG PaceCart 3 (SKU OB500PCART3) is a durable and high-output dispensing cart engineered specifically for applying OlyBond500 two-part insulation adhesive. It delivers high production rates (up to 120 squares per hour) while being user-friendly and serviceable. The design includes a 30-foot application hose, color coded trays to avoid cross-contamination of Part-1 and Part-2 adhesive lines, built-in volt meter, and generator shelf for rooftop mobility. Key Features capable of dispensing...

The OMG RBT007 RhinoBond with OptiWeld kit is a next-generation induction welder designed to weld RhinoBond plates under TPO or PVC membranes without penetrating the membrane. It includes built-in OptiWeld automatic calibration to adjust energy for membranes up to 80 mils thick, a bright LED touch display, and comes with a 6-pack of heat sink magnets. The tool is built to improve speed, consistency, and reliability for commercial roofing contractors. Key Features automatic calibration...

OBPC15KIT is a conversion kit for OMG PaceCart 2B and PaceCart 3 equipment that allows contractors to use two 15-gallon drums (30 gallons total) of OlyBond500 adhesive instead of smaller bag-in-box sets. It increases dispensing capacity, saves time by reducing refills, and installs quickly in under 15 minutes. The kit provides flexibility to use drums or bag-in-box sets as job conditions demand, enhancing productivity on large roofing jobs. Key Features conversion to allow use of 15-gal drums...

OMG PowerGrip Universal 7 (SKU PGRPU7-STD2 for 2-pack; PGRPU7-STD12 for 12-pack) is a compact roof anchor engineered for commercial roofing systems to securely support solar racks, pipe supports, and other rooftop equipment. It provides high static loads while minimizing ballast and transferring loads directly to the roof deck. Each anchor is designed to be watertight without flashing in many applications. Key Features Compatible with mechanically attached, fully adhered, and ballasted roof...

OMG OB18WHIP is a 36-inch whip hose designed as a replacement part for the OMG PaceCart3 adhesive dispensing system. It connects between the Vee manifold and the 30-foot material hose, allowing for better flexibility at the gun and fast replacement in case of clogs. Built with Moisture-LOK lining for material purity and rated for high pressure to perform reliably in demanding jobsite conditions. Key Features 36-inch length for good reach and flexibility at the gun Moisture-LOK lining to reduce...

RB-HandWelder is the OMG RhinoBond handheld induction welder made for bonding RhinoBond plates to TPO and PVC membranes where full welders can’t reach—such as under rooftop equipment, at edges, or on vertical surfaces. The tool delivers reliable welds using induction technology, offers adjustable energy settings for different membrane thicknesses, and provides visual and tactile feedback to ensure proper weld cycles. It also comes with magnets for cooling and positioning, and is powered via...

RBM003 is a set of six Heat Sink Magnets for the OMG RhinoBond system, used immediately after each induction weld to ensure a strong, consistent bond. These magnets transfer heat away from the welded plate to allow proper curing and reduce membrane movement. The polymer body and magnet design are optimized for alignment, heat dissipation, and field durability. Key Features six magnets included so multiple welds can be held down at once made of a proprietary polymer to improve thermal transfer...

PGSTRUT10X10HA-BK is an OMG PipeGuard model featuring a height-adjustable galvanized strut channel mounted on a heavy-duty black EPDM rubber base. Its 10-inch length supports single or multiple pipes or conduit runs up to 6-inches total diameter. The strut height adjusts from 4-inches to 10-inches above the roof deck, making it useful where pipe routing requires elevation. It is built for durability, stability, and compatibility with standard strut clamps.Key Features height adjustable from...

The OMG OB500HOSE-30 is a 30-foot replacement material hose for OMG’s PaceCart adhesive dispensing systems. It is built with Moisture-LOK lining to prevent material contamination, rated for high working pressure, and designed to keep adhesive flow consistent even in demanding jobsite conditions. This hose helps maintain performance on larger jobs by giving roofers reach and flexibility. Key Features 30-foot hose length for extended reach and maneuverability Moisture-LOK lining for maintaining...

OB5001-TANK and OB5002-TANK are the pressurized Part 1 and Part 2 canisters for the OMG OlyBond500 two-component polyurethane foam adhesive system. These tanks allow contractors to apply adhesive without requiring a PaceCart, making them highly portable for a range of job sizes. The system dispenses semi-liquid beads that rise ¾- to 1-inch above the substrate and cure in 4-8 minutes depending on conditions. The canisters are designed for applications where speed, mobility, and convenience are...

OMG SpeedTite RetroDrain models SPT3A, SPT4A, SPT5A, SPT6A are retrofit roof drains designed to improve drainage performance by reducing vortexing and accelerating water removal. They install from the roof surface into existing drain leaders, featuring a mechanical seal that provides a watertight connection in seconds. With sizes from 3 to 6 inches and an extra-large flange, they accommodate most field conditions and work with many roof cover types. Key Features vortex breaker reduces slow...

PGSTPE10 is a Strut model PipeGuard by OMG, designed to support multiple rooftop pipes, conduit, or tubing with up to 6-inch total diameter. It features a 10-inch wide base and a low-profile galvanized strut channel to accommodate one or more strut clamps. Available in HDPE (black or safety yellow), it lifts pipes approximately 3.75-inches above the roof surface, providing strength, stability and high load capacity in a durable, weather-resistant package. Key Features accommodates multiple...

The OMG AccuTrac Plate bucket (Item BKT6862904) includes 1000 flat-bottom, 3-inch square insulation plates made of Galvalume-coated steel. Designed to be used with the OMG AccuTrac and AccuTrac EZ tools, these plates improve productivity by providing a durable, uniform fastening surface for insulation and cover boards. Approved by Factory Mutual and Dade County, they are packaged in weatherproof buckets for jobsite durability. Key Features flat bottom plate style compatible with Phillips head...

PowerGrip Plus (SKU PGRP-PLUS, Box of 8) is a commercial roof mount system by OMG engineered to secure solar panel racks and rooftop equipment to TPO or PVC single-ply membrane roofs. Each mount transfers uplift and shear loads directly to the structural deck, maintaining watertight integrity when properly installed. The wide flange is designed for heat welding to the membrane, and the mount includes corrosion-resistant bolt and stand components. Key Features designed to secure solar racks and...

The PGSTRUT6-BK is a fixed-height, strut-model PipeGuard from OMG designed to support rooftop pipes, conduit, or copper tubing up to 5-inches in combined diameter. Its EPDM base protects the roof membrane, while the galvanized strut channel accommodates single or multiple pipes using strut clamps sold separately. At 4-inches height and 6-inches width, it offers excellent stability and high load performance (800 lbs), ideal for commercial solar conduit or mechanical plumbing runs. Key Features...

The OMG OB17GRAVHOSE is a clear Tygon gravity hose designed for use with OMG’s PaceCart2 and PaceCart3 adhesive dispensing carts. It allows adhesive to flow by gravity, helping maintain consistent application performance. The hose is built with chemical resistance in mind, and designed as a durable replacement part to keep the dispensing system reliable. Key Features replacement part for PaceCart2 and PaceCart3 carts clear Tygon construction for visibility of adhesive flow gravity-fed flow for...

PGHA85-BK is a height adjustable version of OMG’s PipeGuard designed to support rooftop pipe, conduit, or tubing with diameters from ½-inch to 4-inches. It lifts pipes to heights adjustable between 5-inches and 8½-inches above the roof surface using an adjustable stainless steel support, combined with an EPDM rubber base to protect roofing membranes. Its triangular design sheds water and the integral clamp allows quick tool securing. Key Features fits pipe sizes from ½-inch to 4-inches...

VTBSTR10-YW is the yellow vortex breaker strainer dome by OMG, designed to retrofit onto existing Hercules or Aluminum Classic roof drains in 3-, 4-, 5-, or 6-inch sizes. The strainer integrates vortex breaker technology in its cast aluminum dome to accelerate drainage (up to 2.5× more flow versus standard strainers), reduce “chugging” of water, and enhance performance under heavy rainfall. Its bright safety yellow finish helps visibility on the roof and marks drain locations clearly. Key...

The OMG XHD003B is a 3-inch #15 Extra Heavy Duty roofing fastener designed for maximum performance in light gauge steel, OSB, plywood, and aluminum decks. Its oversized shank and thread diameters improve pull-out resistance, while deep buttress threads reduce back-out. A miniature drill point ensures quick penetration and the CR-10 coating protects against corrosion. Key Features: Oversized heavy shank and thread diameters for superior pull-out resistance Deep buttress thread design for...

OB500-DUALTK is a small canister kit for OMG’s OlyBond500 two-component, low-rise polyurethane adhesive. The set includes both Part 1 and Part 2 in pressurized canisters, plus a hose, gun assembly, mix tips and extension tubes to allow roofers to apply adhesive without extra equipment. It’s ideal for jobs that need mobility, quick setup, or spattering application for fleece backed membranes. Key Features equipment-free kit with pre-pressurized canisters, hose, gun, mix tips, and extensions...

The OMG PowerGrip Universal 11 (SKU PGRPU-STD for single unit; PGRPU-STD-6PK for a 6-pack) is a high-strength roof mount anchor for commercial roofing applications, designed to secure equipment like solar racks, pipe supports, and mounted HVAC without relying on ballast. It anchors directly to the roof deck, offering excellent static tensile, shear, and compressive capacities while maintaining watertight integrity without needing flashing in many installations. Available in single or 6-unit...

The OMG ALDCR2A 2-inch O-Ring RetroDrain is a retrofit roof drain insert engineered to replace existing drains without removing plumbing fixtures. It features a seamless one-piece spun aluminum body, dual rubber O-rings, and an extra-large flange to secure roofing membrane flashing. It comes with a U-Flow cast aluminum strainer dome and aluminum clamping ring to maintain durability and watertight integrity. Key Features seamless one-piece spun aluminum body to eliminate leak points two rubber...

The OMG CRHD8B is an 8-inch #14 heavy duty roofing fastener engineered for securing insulation and membranes to common roofing decks. It features deep thread geometry for strong pull-out resistance. A 30° spade point aids fast starts and penetration, and the CR-10 finish provides corrosion resistance. Key Features: Deep thread profile for high pull-out resistance 30° spade point for rapid penetration and fast starts CR-10 corrosion-resistant coating for durability #3 Phillips truss head...

The OMG RhinoTrac EZ insulation plate is designed for use in mechanically attached commercial roofing systems to secure insulation and membrane assemblies. It provides consistent holding power while helping distribute load across the insulation surface. The plate is used with compatible fasteners to create a secure attachment system for a range of roofing applications. Key features Designed for mechanically attached roofing systems Helps distribute load across insulation surface Compatible...

The OMG XHD006B is a 6-inch #15 Extra Heavy Duty roofing fastener designed for attaching insulation and membrane to light gauge steel, OSB, plywood, and aluminum decks. With oversized shank and thread diameters, it offers maximum pull-out resistance. Deep buttress threads reduce pull-out and back-out risks, while the miniature drill point provides quick penetration. The CR-10 coating ensures long-lasting corrosion protection. Key Features: Oversized shank and threads improve pull-out...

The OMG CRHD6B is a 6-inch heavy duty roofing fastener in the #14 series designed to secure insulation and membrane to steel, wood, and concrete decks. It features deep thread geometry and a sharp spade-type point for rapid penetration. The fastener is coated with OMG’s CR-10 corrosion-resistant finish and is FM and Miami-Dade approved. Key Features: Deep threads provide high pull-out resistance and secure grip in roofing substrates Sharp 30° spade point allows fast penetration into steel,...

The OMG CRHD9B is a 9-inch #14 heavy duty roofing fastener used to secure insulation and membranes to common roof decks. Deep thread geometry delivers strong pull-out resistance. A 30° spade point speeds penetration, and the CR-10 finish provides corrosion resistance. Key Features: Deep thread profile for high pull-out resistance 30° spade point for fast starts and penetration CR-10 corrosion-resistant coating for durability #3 Phillips truss head compatible with standard screw guns 9-inch...

The OMG RGDP003B is a 3" #12 Standard RoofGrip Drill Point fastener designed to attach insulation and membranes to steel decks (18–24 gauge) and wood decks. It features deep buttress threads that enhance pull-out resistance. The extra sharp drill point allows use in retrofit and new construction, while the CR-10 coating provides corrosion protection. Key Features: Deep buttress threads for high pull-out resistance Extra sharp drill point for efficient penetration #3 Phillips truss head design...

The AccuTrac EZ is a cordless, stand-up insulation fastening tool from OMG designed to install AccuTrac insulation plates and fasteners in one smooth operation. Its ergonomic, upright design reduces bending and fatigue while maintaining consistent fastener depth and alignment. The tool improves rooftop productivity by allowing faster, more accurate insulation attachment using a cordless screw gun. Key Features: cordless operation allows use with standard cordless screw guns stand-up ergonomic...

OMG Bead Style Replacement Mix Tips are designed for use with OlyFill two-component foam sealant systems & OlyBond500 Adhesive System. These disposable static mixing nozzles ensure proper blending of material during application and help maintain consistent bead output. Sold in packs of 10, these replacement tips are ideal for contractors who need fresh nozzles between applications to ensure proper mixing and performance. Bead-style configuration is designed for controlled foam placement in...

The OMG RGDP006B is a 6" #12 Standard RoofGrip Drill Point fastener intended to secure insulation and membrane systems to steel decks (18-24 ga) and approved wood decks. It employs deep buttress threads to resist pull-out. Its drill point tip allows penetration even in retrofit scenarios, while the CR-10 coating provides corrosion protection. Key Features: Deep buttress threads enhance pull-out resistance Sharp drill point enables efficient penetration, even through membranes #3 Phillips truss...