ESE Machines

The ESE Machines 001C First Stage Hand Seamer is designed for forming the initial 90° bend on single‐lock standing seam panels that measure ½″ (0.500″) across the top. It features a lightweight, easy-use body engineered for hard-to-reach locations and start, finish or full‐roof use. The tool is designed to avoid scratching or peeling coated or painted metal surfaces and is manufactured in the USA. Key features: Compatible with standing seam profiles measuring ½″ across the top leg. Forms the...

The ESE Machines 001N First Stage Hand Seamer is engineered for creating the initial 90° bend on single-lock standing seam panels that measure 1/2″ (0.500″) or 9/16″ (0.562″) across the top. It features a lightweight frame and a unique leverage design for start, finish or full-roof applications in tight or hard-to-reach locations. The tool is designed with non-scratch jaws to protect coated or painted surfaces and is manufactured in the USA. Key features: Creates the first-stage 90° bend for...

The ESE Machines 099 Finish Hand Seamer is designed for the second-stage 180° bend on double-lock standing seam panels that measure ½″ (0.500″) across the top. It is lightweight and engineered to be used in hard-to-reach locations for starting, finishing or full-roof application. The tool is made in the USA and features construction that will not scratch or peel painted or coated surfaces. Key features: Forms the 180° bend for double-lock panels measuring ½″ across the top leg. Lightweight...

The ESE Machines 001-750 First Stage Hand Seamer is designed for forming the initial 90° single-lock bend on standing seam panels that measure 3/4″ (0.750″) across the top. Its lightweight construction and long handles allow controlled work in tight or elevated areas. The tool is engineered to avoid scratching or peeling coated or painted metal surfaces, making it suitable for start, finish, or full-roof applications. It is manufactured in the USA for professional metal-roofing use. Key...

The ESE Machines 001-812 First Stage Hand Seamer is designed for forming the initial 90° single-lock bend on standing seam panels that measure 13/16″ (0.812″) across the top. The tool is lightweight, engineered with a leverage design for start, finish, or entire-roof applications, safe for painted or coated metal surfaces, and manufactured in the USA. Key features: Creates the first-stage 90° bend for profiles measuring 13/16″ (0.812″) across the top leg. Lightweight and leverage-assisted...

The ESE Machines K9DL Double Lock Power Seamer is a powered tool engineered to form a double-lock standing seam in one pass on panels with leg heights of 1″ or 1-1/2″. The machine is lightweight at about 40 lbs, runs on a 115 V single phase motor drawing 7 amps, and can be converted for single-lock use with optional rolls. It is designed for both painted and unpainted metal roofing surfaces and manufactured in the USA. Key features: Rolls a full double-lock standing seam in a single pass for...

The ESE Machines 002C Curved Hardy Tool is designed specifically for forming single or double lock standing seams in areas with curved or contoured surfaces that the standard flat-bottom model cannot fit. It features an ergonomic handle with multiple flat surfaces for firm grip and control, and is manufactured in the USA. Key features: Ideal for curved surfaces where the standard flat-bottom Hardy Tool cannot be used Supports both single lock and double lock standing seam formation Ergonomic...

The ESE Machines 099-812 Finish Hand Seamer is engineered for closing the second-stage 180° bend on double-lock standing seam panels that measure 13/16″ (0.812″) across the top leg. It is lightweight, designed for start, finish or entire roof runs in constrained or hard-to-reach locations, and includes a finish-safe design to protect coatings and painted surfaces. The tool is manufactured in the USA. Key features: Designed specifically for double-locking a standing seam profile with a 13/16″...

The ESE Machines 099HD Heavy Duty Finish Hand Seamer is designed for the second-stage 180° bend in double-lock standing seam panels that measure 9/16″ or 5/8″ across the top. It utilises a unique leverage design and is lightweight, engineered for start, finish or full-roof use in hard-to-reach locations. The tool is made in the USA and features brass jaws with steel handles to protect coated or painted surfaces. Key features: Designed for double-locking standing seams with 9/16″ or 5/8″ top...

The ESE Machines 001-875 First Stage Hand Seamer is designed to perform the initial 90° bend on single-lock standing seam panels measuring 7/8″ (0.875″) across the top. It features a lightweight design with brass jaws and steel handles engineered to avoid scratching or peeling painted or coated metal surfaces. This tool is suitable for use at the start, finish, or across entire roof runs and is manufactured in the USA. Key features: Designed for panels with a 7/8″ top leg width in single-lock...

The ESE Machines Hardy Tool 002 provides an anvil-style foundation for forming standing seams—usable for both single and double lock profiles. It features an ergonomic handle with flat surfaces for controlled grip and is made in the USA for use in metal roofing applications. The tool supports both single and double locking techniques for standing seams where such shaping is required. Key features: Operable in both single lock and double lock standing‐seam formations Ergonomic handle with...

The ESE Machines 099-750 Finish Hand Seamer is built to form the 180° second-stage bend in double-lock standing seam panels that measure ¾″ (0.750″) across the top. It includes a lightweight design, suitable for start, finish or full-roof use—even in hard-to-reach areas. The tool is designed to avoid scratching or peeling coated surfaces and is manufactured in the USA. Key features: Engineered specifically for double-locking a standing seam with a ¾″ top width. Forms the full 180° bend for the...

The ESE Machines Fixed Cleat Bending Tool is designed for forming fixed cleats efficiently in a two-step process. It is available in two versions to produce either a 1 inch or a 1.5 inch cleat height. Each tool supports multiple metals including steel, stainless steel, aluminum, and copper within the listed thickness limits. The tool uses pre-cut material sizes and features built-in nail impressions to simplify installation. Key features: Forms fixed cleats in two quick forming steps for...

The ESE Machines 001-812SU First Stage Hand Seamer is a stand-up design created for forming the initial 90° single-lock bend on standing seam panels that measure 13/16″ (0.812″) across the top. It is optimized for use in hard-to-reach zones, offers job-site convenience (stand‐up operation), is lightweight and engineered to avoid scratching or peeling coated or painted metal surfaces. The tool is made in the USA. Key features: Designed for single-locking standing seam profiles measuring 13/16″...

The ESE Machines 001-625 First Stage Hand Seamer is engineered for performing the initial 90° bend on single-lock standing seam panels measuring 5/8″ across the top. It features a lightweight frame with brass jaws and steel handles, designed to avoid scratching coated metal surfaces. This tool is suitable for starting, finishing, or completing entire roof runs and is manufactured in the USA. Key features: Forms the first-stage 90° bend for 5/8″ (0.625″) wide standing seam profiles Brass jaws...

The ESE Machines 099-875 Finish Hand Seamer is designed to form the second-stage 180° bend on double-lock standing seam panels that measure 7/8″ (0.875″) across the top. It features a unique leverage design made for hard-to-reach locations, is lightweight and easy to use without scratching or peeling painted or coated metal surfaces. This tool is made in the USA and is suitable for starting, finishing, or seaming entire roof runs. Key features: Built specifically for double-locking the second...

The ESE Machines 001-700 First Stage Hand Seamer is designed to form the initial 90° bend on single-lock standing seam panels that measure 11/16″ across the top. It features brass jaws with steel handles in a lightweight frame engineered to protect coated metal surfaces from scratching or peeling. This tool is built for starting, finishing, or executing entire roof runs and is manufactured in the USA. Key features: Designed specifically for panels measuring 11/16″ across the top in single-lock...

The ESE Machines 099-700 Finish Hand Seamer is built to form the second stage 180° bend on double-lock standing seam panels measuring 11/16″ (0.700″) across the top. It is designed for use in hard-to-reach locations and for start, finish or full-roof applications. The tool includes a unique leverage design and brass jaws with steel handles to avoid scratching or peeling coated metal surfaces. Manufactured in the USA. Key features: Designed specifically for double-locking standing seams with an...

The ESE Machines T180ER True 180 Edge Roller is a hand-tool for rolling along a sheet-metal edge that has already been bent to 90° and forming it into a clean 180° hem with a maximum depth of 1″. It features an industry-exclusive spiral scratch guard and a top-mounted roll to prevent damage to coated surfaces. The tool is manufactured in the USA and compatible with other edge-benders from brands like Freund and Malco. Key features: Rolls a 90° pre-bend into a crisp 180° hem, up to 1″ depth...

The ESE Machines T90ER True 90 Edge Roller is engineered to roll along the edge of sheet metal to produce a crisp 90° bend. It features a special angled roller that provides an additional 12° clearance to allow a true 90° configuration. The adjustable length bearing shaft accommodates different material depths and the tool is made in the USA. Key features: Rolled forming of a 90° bend using an industry-exclusive angled roller that offers 12° of added clearance Adjustable bearing shaft length...

The ESE Machines 1″ L3 Expansion Cleats are manufactured from 304 stainless steel in 28 gauge and are compatible with all roofing materials. They feature a 3″ base and an exclusive ESE butterfly-top design, and are intended for use with long roof panels that require expansion functionality. These cleats were originally designed for use with the ESE 100 system and are made in the USA. Key features: Constructed of 304 stainless steel at 28 gauge, offering full compatibility with all roofing...

The ESE Machines 1″ Fixed Cleats are available in either galvanized steel or 304 stainless steel, both at 28 gauge. The stainless version is compatible with all roofing materials, while the galvanized version is compatible with all materials except copper and mill-finished aluminum. These fixed cleats are designed for use near roof peaks or in low-expansion zones, and each box of 1,000 units ships from the USA. Key features: Available in two material options: galvanized steel and 304 stainless...

ESE Machines 1-1/2″ Expansion Cleats (SKU: 1.5-ESS) are made from 304 stainless steel at 28 gauge and are compatible with all roofing materials. They feature a 3″ base and an exclusive “butterfly” top design for use with long roofing panels where thermal expansion is expected. These cleats are manufactured in the USA for professional metal roofing systems. Key features: Made from 304 stainless steel at 28 gauge for full compatibility with all roofing materials 1-1/2″ cleat height with 3″ base...

The ESE Machines 1-1/4″ Fixed Cleats (SKU 1-25-FSS) are made from 304 stainless steel at 28 gauge and are compatible with all roofing materials. They are designed for use near the roof peak or in areas of low thermal expansion and are supplied in boxes of 1,000 units for large-scale use. The product is manufactured in the USA. Key features: 304 stainless steel construction at 28 gauge for full material compatibility Fixed cleat height of 1-1/4″ suitable for near-peak or low-expansion...