Flame Engineering

The Red Dragon 7" Spud Bar Replacement Blade is a bolt-on replacement designed to restore cutting performance on compatible spud bars. It replaces worn or damaged blades to maintain effective material removal during roofing tear-off work. This blade is used on spud bars for removing built-up roofing, gravel, and adhered materials from roof surfaces. Its replaceable design allows crews to swap blades in the field and keep tools in service without replacing the entire bar. Key Features 7" wide...

The Flame Engineering Red Dragon HR-836 Roll Hook is a lightweight tool used to position and move roofing membrane rolls during torch-applied applications. It allows the operator to push or pull rolls into place without stepping on the material. This tool is used in modified bitumen roofing work to help maintain proper membrane placement while torching. It supports controlled handling of rolls and helps reduce foot traffic directly on the membrane during installation. Key Features Allows...

The Red Dragon® RD 6009 Roof Dryers defrost, dry and get you back on the job with minimum effort. Our rugged design and user-friendly features make them the perfect choice for professional roofing contractors. Use them to dry surfaces after ponding water has been removed or to remove morning dew, frost or light debris. The Roof Dryers work by combining high heat (up to 350º F) and a 200 mph airstream to facilitate quick drying and reduce costly downtime. There are no electrical cords or danger...

The Flame Engineering Red Dragon SPA-740A is a roll-mounted modified bitumen applicator designed for torch-applied membrane installation. It features a multi-burner system with adjustable torches mounted on a mobile frame, allowing controlled and consistent heating across the width of the roll. This applicator is used in commercial roofing to apply modified bitumen membranes efficiently. The adjustable manifold and roll-mount design allow the operator to control torch positioning and heat...

The Flame Engineering Red Dragon Spark Lighter provides a safe and reliable way to ignite propane torches, welders, and cutting equipment. Designed for ease of use, this flint-style lighter produces consistent sparks without the need for matches or open flames. Each unit includes a pack of replacement flints and is capable of producing up to approximately 1,500 ignitions per flint. Its lightweight and durable design makes it suitable for regular use in roofing and other applications requiring...

The Flame Engineering Red Dragon RT 2-1/2-20 C is a field torch kit designed for stand-up roofing applications. It delivers up to 400,000 BTU of heat output and is used for applying modified bitumen membranes and other torch-down materials. The kit includes a complete torch assembly with hose, regulator, and accessories needed for operation. Its 29" torch length and 2.5" bell are configured for controlled flame application while allowing the operator to work in an upright position. Key...

The Flame Engineering Red Dragon RT Combo Torch Kit is a combination field and detail torch system used for torch-applied roofing work. It includes both a high-output field torch and a smaller detail torch, allowing the operator to switch between wide-area heating and more precise work using the same setup. The kit features a quick-connect system that allows the user to change between torches without tools. This setup is used in modified bitumen applications where both large surface heating...

By customer request we are offering a new wagon similar to a competitor’s model. The older style two handle design modernized by Red Dragon technology. Features include a stainless steel manifold and framework and 7 durable vapor torches. Each torch has a flame adjusting needle valve for total flame control and the manifold easily moves to and from the roll. Lighter weight than the competition and American made. Manifold easily moves to and from the roll. Apply 3/4, 1, 1-1/2 square rolls. For...

The Flame Engineering Red Dragon RT 1-1/2-10 C is a detail torch kit used for precision heating in roofing applications. It delivers 50,000 BTU and features a compact torch design for working around flashings, walls, and other tight areas. This kit includes the components needed for setup, including hose, regulator, and ignition tool. It is used in modified bitumen work where controlled heat is required for smaller sections and detail areas. Key Features 50,000 BTU burner output15" torch...

The Flame Engineering Red Dragon RT TWIN C is a twin burner field torch kit designed for high-output roofing applications. It features a dual burner configuration that increases total heat output compared to a standard single torch setup. This kit is used in modified bitumen work where larger surface areas require more heat coverage. The twin burner design allows wider flame spread during application while maintaining a stand-up torch configuration. Key Features Dual burner torch...

The Flame Engineering Red Dragon SPA-540A is a roll-mounted modified bitumen applicator designed for torch-applied membrane installation. It features a five-torch configuration mounted on a mobile frame to provide consistent heat across the roll during application. This applicator uses an adjustable manifold and Easy-Roll mount system to control torch position and flame angle while advancing the membrane. It is used in commercial roofing where controlled heat distribution and steady roll...

The Flame Engineering Red Dragon RT 3-20C is a high-output field torch kit designed for roofing applications requiring increased heat coverage. It delivers up to 500,000 BTU and uses a twin-head torch design to produce a wider and longer flame compared to standard single-head torches. This kit is used in modified bitumen work where higher heat output is needed across larger areas. The increased flame width allows for broader coverage during application while maintaining a stand-up torch...

The Flame Engineering Red Dragon 567RD is a high-pressure adjustable propane gas regulator designed for use with roofing torches, tar pot heaters, weed burners, and other high-demand applications. It delivers precise pressure control from 0 to 100 PSI, making it suitable for a wide range of jobsite conditions. This regulator is built for cylinder systems using either liquid or vapor LP gas and features a compact, medium-capacity design with consistent regulating performance. It includes a...

The Flame Engineering Red Dragon P-W795 is a hand-tighten excess flow P.O.L. fitting designed to safely connect LP gas cylinders to regulators, hoses, and other propane equipment. Its hand-wheel design allows for quick installation and removal without the need for tools, making it ideal for jobsite use. Built with a soft-nose brass construction, this fitting provides a secure, leak-resistant connection while incorporating an integrated excess flow safety device that automatically restricts gas...

The Flame Engineering Red Dragon Spark Lighter Flint Replacement Kit provides reliable replacement flints for maintaining consistent ignition in spark lighters. Designed for use with flint-style torch lighters, each flint delivers strong, dependable sparks for safe ignition of propane torches and similar equipment. Each pack includes five replacement flints, with each flint capable of producing up to approximately 1,500 ignitions depending on use. These flints are easy to install and ensure...

The Flame Engineering Red Dragon 567RC is a medium-capacity adjustable propane gas regulator designed for use with roofing torches, tar pot heaters, weed burners, and other high-demand applications. It delivers precise pressure control from 0 to 60 PSI, making it suitable for a variety of jobsite conditions. Designed for cylinder systems using either liquid or vapor LP gas, this regulator features a hand-wheel adjustment for easy control and a built-in plugged gauge port for optional pressure...

The Flame Engineering Red Dragon Quick Connectors (HN-5, HN-6, HK-7, and HK-8) are designed to allow fast connection and disconnection of LP gas lines from roofing torches and other propane equipment without the use of tools. These all-brass fittings provide a secure and efficient way to swap between tools or service connections in the field. The quick-connect design allows coupling under pressure with minimal fuel loss, improving efficiency on the jobsite. Both male and female connectors...

The Flame Engineering Red Dragon V-880P/H-1 is a squeeze valve and handle kit designed to add on-demand flame control to compatible vapor torch systems. It features a high-pressure brass valve with an integrated adjustable pilot, allowing the operator to maintain a low flame between uses and activate full output only when needed. This kit is used in roofing and torch applications where intermittent flame control is required. The squeeze lever design helps reduce continuous fuel flow, while the...

The Flame Engineering Red Dragon V-334 is a heavy-duty needle valve used to control propane flow in roofing torch and heating equipment. It features a compact, all-brass construction for durability in demanding job site conditions. This valve is commonly used in torch setups and repair assemblies where precise flame adjustment is required. The integrated thumb wheel allows for controlled gas flow, helping operators fine-tune flame output during use. Key Features All-brass construction for...

The Flame Engineering Red Dragon P-1685 is a standard P.O.L. fitting used to connect propane cylinders to regulators, hoses, and other torch system components. It threads directly into most vapor propane and butane cylinders using a left-hand P.O.L. connection. This fitting features a straight-through flow design without an internal excess flow safety device, allowing consistent fuel delivery in high-demand applications such as roofing torch systems and modified bitumen equipment. Key Features...

The Flame Engineering Red Dragon RT-BASIC is a field torch kit designed for roofing applications where a straightforward setup is required. It features a 400,000 BTU torch assembly based on the RT 2-1/2-20 configuration, providing standard heat output for torch-applied work. This kit includes only the core components needed for operation, making it suitable for crews looking for a basic torch setup without additional accessories or upgrades. It is used in modified bitumen applications where a...

The Flame Engineering Red Dragon VT 2-1/2-0 is a replacement torch head designed for use with compatible Red Dragon vapor torch kits and modified bitumen applicators. It delivers high heat output for roofing and surface heating applications. This torch head is commonly used as a replacement component in roofing torch systems where consistent flame performance is required. Its 2.5" bell design supports controlled heat distribution during torching operations. Key Features 400,000 BTU maximum...

The Flame Engineering Red Dragon RT COMBO LW is a lightweight combination torch kit that includes both a field torch and a detail torch for roofing applications. It allows the operator to switch between wide-area heating and more controlled detail work using the same setup. This kit features quick-connect fittings that allow tool-free switching between torches while using a single hose, regulator, and fuel source. Both torches are lightweight versions, reducing overall handling weight during...

The Flame Engineering Red Dragon RT 2-1/2-20LWC is a lightweight field torch kit designed for stand-up roofing applications. It delivers 400,000 BTU and uses the same general configuration as standard RT 2-1/2-20 systems, with a reduced-weight design for easier handling during extended use. This kit is used in modified bitumen work where a full-size field torch is required, but with less overall weight in the assembly. It includes the necessary components for setup, allowing for controlled...

The Flame Engineering Red Dragon M7273 is a wrench-tighten M.O.P. fitting designed for use with liquid propane torch systems. It provides a secure connection point for high-demand liquid fuel applications where a more rigid, tool-tightened seal is preferred. This fitting is used in roofing torch setups that operate on liquid propane, offering a more vibration-resistant connection compared to hand-tight fittings. It is commonly selected as a replacement for standard M.O.P. fittings when a...

The Flame Engineering Red Dragon G-23 is a steel-cased pressure gauge used to monitor working pressure in propane regulator systems. It provides a visual reading of system pressure through a 0–100 PSI scale. This gauge mounts directly to compatible Red Dragon regulators with a 1/4" male pipe connection and is used where pressure monitoring is required during operation. Key Features Steel case construction0–100 PSI pressure range1/4" male pipe stem connection2" dial diameterMounts to compatible...

The Flame Engineering Red Dragon P-3200W is a P.O.L. fitting with an integrated excess flow safety device for connecting propane cylinders to torch systems and related equipment. It threads directly into standard LPG cylinder valves and provides a controlled connection point to regulators or hoses. This fitting is used in roofing torches, tar pots, and asphalt heating equipment where higher fuel demand and added flow protection are required. The excess flow feature helps limit gas discharge in...

The Flame Engineering Red Dragon ST1-12C is a propane-powered soldering iron kit used for roofing and sheet metal applications. It operates using a standard propane cylinder, eliminating the need for electricity or acetylene while maintaining consistent heat during use. This kit is used for soldering flashings, gutters, copper, and other roofing metals where steady heat and mobility are required. It is commonly used in field conditions where power access is limited or portability is needed....

The Flame Engineering Red Dragon Valve Repair Kits and Lever Assembly are replacement components designed for use with the V-880P squeeze valve. These kits allow users to service specific parts of the valve instead of replacing the entire assembly. Available options include repair kits for the pilot valve, main valve, and the lever assembly, giving crews the ability to restore function to worn or damaged components in the field. Key Features Designed for V-880P squeeze valve repairOptions...

The Flame Engineering Red Dragon F-322 is a hex coupling used to connect two 1/4" female pipe thread (FPT) components in gas, air, oil, or water systems. It provides a straight-through connection point for extending or joining threaded fittings. This coupling is commonly used in propane torch assemblies and related equipment where matching female-threaded components need to be connected inline. The hex body allows for wrench tightening during installation. Key Features 1/4" FPT x 1/4" FPT...

The Flame Engineering Red Dragon TB-4 Torch Stand is a bolt-on accessory designed to support roofing torches when not in use. It attaches directly to the extension tube of compatible Red Dragon torches to hold the burner off the surface. By keeping the torch elevated and directing the flame upward, this stand helps maintain safer handling during pauses in operation. It is commonly used in modified bitumen torching setups to prevent contact with the roof surface between uses. Key Features...

The Flame Engineering Red Dragon ET-2B Twin Burner Adaptor is used to convert a single-burner roofing torch into a dual-burner setup. It installs between the extension tube and burner, allowing a second torch head to be added to the system. This adaptor is used in roofing applications where increased heat coverage is needed. By running two burners from one torch assembly, it allows wider heat distribution during modified bitumen work. Key Features Converts single burner torch into dual burner...

The Flame Engineering Red Dragon Torch Extension is a replacement tube used to connect the control valve to the torch head on compatible Red Dragon roofing torches. It serves as the standard extension component in RT series torch assemblies. Available in two lengths, the ET-20 (18") and ET-4 (4"), these extensions are used to maintain proper spacing and configuration between torch components. Each extension includes a welded torch stand to support the burner when not in use. Key Features...