Gutter Tools

The Big Bear Trim Coil Dispenser is made from high-impact ABS plastic to hold 24-inch coils and prevent them from unraveling or causing hazards. It uses 5⁄16″ UV-protected bungee cords for tension control and includes base pads to protect coil edges while dispensing. Its design allows clamping to surfaces or placement on the ground for stable operation. Key features: Molded ABS plastic housing Uses 5⁄16″ UV-protected bungee cords to control coil tension Integrated base pads protect coil edges...

The Malco GOT Gutter Outlet Punch is a ratcheting tool designed to create clean, accurate downspout outlet holes in aluminum gutters. It uses interchangeable punch and die components to cut precise openings for standard downspout sizes, allowing for efficient gutter installation and modification. The ratcheting mechanism enables controlled cutting with minimal effort while maintaining consistent hole quality. Key Features Creates clean outlet holes in aluminum gutters for downspout...

The Malco SL2R Snap Lock Punch / Gutter End Cap Crimper is a hand tool designed to create secure snap-lock crimps in sheet metal and aluminum gutters. It produces a raised dimple that locks gutter end caps and adjoining materials together without the need for fasteners, helping create a tight, reliable connection during installation. The adjustable design allows for controlled crimp depth across a range of sheet metal applications. Key Features Creates snap-lock crimps for gutter end caps and...

The Malco C5R Downspout Crimper is a 5-blade hand tool designed to downsize the ends of round duct, pipe, and downspout sections to create a tight, interlocking connection. The multi-blade design forms long, shallow double crimps that replicate factory indentations, allowing sections to fit together securely while maintaining shape and alignment. Key Features 5-blade design creates long, shallow double crimps for tight-fitting jointsProduces factory-style indentations for secure,...

The Malco C4R Downspout Crimper is a 5-blade hand tool designed to downsize the ends of round pipe and downspout sections to create a secure, interlocking fit. The multi-blade design forms long, shallow double crimps that replicate factory-style indentations, allowing sections to connect tightly while maintaining the shape of the material. Key Features 5-blade design creates long, shallow double crimpsDownsizing function creates a male end for joining sectionsProduces factory-style crimps for...

The Van Mark CD24 Coil Dispenser (24 in.) is designed to keep coil stock organized, controlled, and easy to feed while you work. Ideal for siding, trim, fascia, and flashing applications, this dispenser lets coil unroll smoothly without tangling, kinking, or “running away” on the jobsite. Paired with a brake or used as a standalone accessory, the CD24 improves workflow, reduces material damage, and helps crews work cleaner and faster. Built with durable components to withstand everyday...

The Malco GOTRC Gutter Outlet Punch Replacement Chocks are replacement components designed for use with Malco gutter outlet punch tools. These internal chocks work within the tool’s drive mechanism to maintain proper grip and motion during punching operations, helping ensure consistent cutting performance and reducing slippage during use. Key Features Replacement chocks for Malco gutter outlet punch toolsRestore proper function of the punch drive mechanismHelp prevent slipping during punching...

The Malco GSG6 Magnetic Gutter Screw Guide is an extra-long driver attachment designed to hold and guide 1/4" hex head gutter screws during installation. It fits over the outside edge of the gutter, allowing fasteners to be driven accurately while protecting the gutter finish. The built-in magnetic tip keeps the screw engaged, while the aluminum sleeve stabilizes the screw for straight, controlled starts and consistent seating. Key Features Holds and guides 1/4" hex head gutter...

The Malco Gutter Outlet Punch (2" x 3") is a ratcheting punch tool designed to create clean, accurate rectangular outlet holes in aluminum gutters for downspout installation. Using a matched punch and die, it cuts precise openings while maintaining gutter shape, allowing for consistent placement of 2" x 3" downspout outlets. The ratcheting mechanism and angled blade provide controlled cutting with minimal effort. Key Features Creates clean, accurate 2" x 3" outlet holes in aluminum...

The Malco Gutter Outlet Punch X-Style (3" x 4") is a punch and die system designed to create X-style outlet openings in aluminum gutters for direct downspout attachment. Unlike standard rectangular cuts, the X-style punch forms tabs that can be folded to secure the downspout without a separate drop outlet. Used with the Malco GOT tool frame, it delivers clean, consistent cuts with a ratcheting mechanism and controlled cutting action. Key Features Creates X-style outlet openings for direct...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

The Malco Single Crimper Gutter Tool (SC2) is a light-duty hand tool designed to create a single crimp in aluminum downspouts for quick downsizing and connection. Its compact, one-blade design allows for simple adjustments at the end of a pipe or downspout, making it useful for small jobs, repairs, or tight spaces where larger multi-blade crimpers are not practical. Key Features Creates a single crimp for downsizing aluminum downspoutsCompact design fits easily in tool bags and tight work...

The Malco SL5 Snap Lock Punch is a hand tool used to create raised locking tabs in vinyl siding for securing panels into finishing trim. It punches a three-sided tab into the edge of a siding panel, allowing it to snap into utility trim at the top of walls or beneath windows. The tool forms a high projection to compensate for the natural relaxation of vinyl, helping maintain a secure fit over time. Key Features Creates locking tabs in vinyl siding panels for finishing trimForms raised...

For use with a minimum 1/2-in. (13 mm) cordless or corded electric drill and Malco combination Arbor and High Speed Pilot Drill. Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set at 10 per-inch (per 25.4 mm) will not grab or twist material, even when cutting half round gutter. The Pilot drill bit projects only 11 mm (7/16-in.) out of the shallow 25.4 mm (1-in.) gutter saw...

The Armadillo 12–14 in Flashing Dispenser is built to safely house coil ends under its cover after cutting, reducing exposure. It supports two coil sizes using integrated 1" spacer clips and includes a 5⁄16" UV-protected bungee cord to keep the coil from unwinding. A built-in cutting edge in the cover allows for straight cuts, and a carrying handle helps stabilize it on uneven surfaces. Key features: Keeps the sharp coil end stored beneath the cover Dual 1" spacer clips support two different...

The Malco SL1R Snap Lock Punch is a hand tool designed to create locking tabs in sheet metal for forming secure snap-lock connections. It raises a louver-shaped projection along the edge of the metal, allowing one piece to lock into the rolled seam of another without additional fasteners. The tool is commonly used in ductwork and sheet metal fabrication to create tight, interlocking seams. Key Features Creates louvered locking tabs for sheet metal connectionsTabs fit into standard rolled lock...

Malco Gutter Outlet Punch and Dies make clean, accurate hole cuts in .032" (0.81mm) aluminum gutter. Ample throat clearance allows these lightweight outlet punches to work over the front edge of gutter to quickly line up cuts. Fastener holes are provided in the tool frame base for optional bench mount application. An easy ratcheting mechanism and angled punch-blade provide smooth cutting action. High carbon steel blades on punches assure long service life and are also easily replaceable. Heat...

The Malco Horizontal Nail Hole Slot Punch (NHP1R) is a hand tool designed to add or elongate nail slots in vinyl siding and light-gauge aluminum siding. It creates a horizontal slot that allows siding panels to be properly fastened even when stud spacing does not align with existing nail holes. This helps maintain correct installation and allows for proper panel movement. Key Features Creates horizontal nail slots for vinyl siding installationUsed to add or extend existing nail holes to match...

The Van Mark 3028 Anchor Screws are designed to give contractors a strong, reliable way to secure Van Mark brakes, stands, and related accessories to suitable surfaces. At 3 inches long, these screws provide deep bite and holding power, helping keep your equipment stable during bending, cutting, and forming operations. Packaged in a convenient 100-count box, they’re ideal for both initial setups and future replacements, ensuring you always have the right fasteners on hand for the job. Key...

The Malco JCCR J-Channel Cutter (5/8") is a compound-leverage hand tool designed to cut drain tabs, downstream notch cutouts, and 45° miter cuts in vinyl J-channel. It produces consistent cuts with controlled pressure, allowing installers to quickly form clean, functional trim details during siding installation. Key Features Cuts drain tabs, notch cutouts, and miter joints in vinyl J-channelDesigned for 5/8" J-channel (model JCCR)Produces a single “click” when the cut is complete for...

The Malco JCC75R J-Channel Cutter (3/4") is a compound-leverage hand tool designed to cut drain tabs, downstream notch cutouts, and 45° miter joints in vinyl J-channel. It produces consistent, repeatable cuts with controlled pressure, helping installers form clean trim details quickly during siding installation. Key Features Cuts drain tabs, notch cutouts, and 45° miters in vinyl J-channelDesigned for 3/4" nominal J-channel (model JCC75R)Produces a single click when the cut is complete for...

Malco Gutter Outlet Saws make safe, fast, clean cuts in thin walled and half round gutter. Downspout fits snug and flush with gutter every time. High speed steel teeth set a 10 per-inch will not grab or twist material, even when cutting half round gutter. The pilot drill bit projects only 11mm (7/16 in.) out of the shallow 25.4mm (1 in) gutter saw cup to ensure controlled safe engagement of teeth. A tapered compression spring collar on the arbor pilot drill bit automatically ejects the metal...

Use the Malco Gutter Nail Driver with hidden hangers and 8D galvanized nails to hang aluminum or steel gutters. A non-slip ergonomic grip provides multiple positions for grasping tool and working from above or below roof overhang. Durable 2-piece steel construction plus weather resistant zinc and nickel plating assure long service life of this professional quality tool. FEATURES: Ergonomic Grip 2-piece steel Weather Resistant Zinc and Nickel Planting ...

The Van Mark TAG50 Trim-A-Gutter is a specialized bending system designed to create custom-fit gutter protection right on the jobsite. Built for professional contractors, this tool forms strong, accurate bends in gutter cover material so you can deliver clean, secure, and reliable gutter protection without relying on pre-fab pieces. With its rugged construction and easy-to-use setup, the Trim-A-Gutter helps you work faster, reduce waste, and maintain a consistent, professional finish on every...

The Armadillo 8–10 in Flashing Dispenser stores flashing coils securely, with a cover that keeps sharp ends beneath for safety. It supports two coil sizes using dual 1" spacer clips and includes a UV-protected bungee cord to prevent the coil from unraveling. A built-in cutting edge on the cover enables straight cuts, and the carrying handle helps stabilize it on uneven surfaces. Key features: Stores flashing coil end safely beneath cover Holds two coil sizes via 1" spacer clips UV-protected...

The Malco GOPRB is a replacement blade for GOP23UK.Features:Interchangeable Dies

The Malco JCC50R J-Channel Cutter (1/2") is a compound-leverage hand tool designed to cut drain tabs, downstream notch cutouts, and 45° miter joints in vinyl J-channel. It allows installers to produce consistent trim cuts with controlled pressure, helping streamline repetitive siding work. Key Features Cuts drain tabs, notch cutouts, and 45° miters in vinyl J-channelDesigned for 1/2" nominal J-channel (model JCC50R)Produces a single click to indicate a completed tab cutGraduated jaw markings...

The Midwest Snips C5 5-Blade Duct Crimper (MWT-C5) is a hand-operated tool made to form factory-precision crimps on sheet metal duct ends. It features a 1-5/8″ throat depth that corrugates the duct ends to help ensure tight fitting joints. The crimper uses compound leverage handles to multiply user force and improve ease of use. Designed for ductwork and stovepipe applications, it may be used with either hand. Key features: • Five-blade design produces consistent crimps for tight joint fits •...

The Midwest Snips 5 Blade Crimper Short 1-1/4 in is a hand-operated crimping tool used to form uniform crimps in round sheet metal. It features a five-blade head designed to create evenly spaced crimps for proper duct and fitting connections. The short handle design allows for controlled operation in tight or confined work areas. This tool is commonly used in HVAC and sheet metal applications. Key features: • Five-blade head forms consistent, evenly spaced crimps • Short handle design supports...

Malco’s sheet metal hole cutter can be quickly installed into the chuck of any corded or cordless drill as small as 1/4″ (6.35 mm). The distinctive gold impact cutter bits, highly durable bearings, and pivot pin ensure the longest lasting, fastest cutting, and easiest adjusting solution for cutting holes in sheet metal. The lightweight aluminum frame makes these accessories extremely portable for various hole-cutting applications in sheet metal, including 20-gauge (1.02 mm) galvanized steel....

Use the SC3R 3-Blade Crimper to downsize heavier stove pipe and round metal duct to create a male connection for joining sections. The tool’s hardened steel construction features a heavy-duty compound head and handle linkage, making it easy to crimp up to 24 gauge (0.86 mm) galvanized steel. A handle closing stop maintains a consistent crimp profile for the tool's life, and the steel handle frame withstands abuse without collapsing. Nickel plating resists the elements. The Malco SC3R Crimper...