Clearance Specials

Make bold, legible layout marks that survive the jobsite. Keson lumber crayons deliver dense, high-contrast lines on rough materials—framing lumber, OSB/plywood, concrete forms, masonry, and steel. The durable wax/ pigment blend resists crumbling, won’t wash out at the first hint of moisture, and glides smoothly for fast, consistent marking. Sized to fit standard crayon holders and pockets, they’re the everyday staple for framers, carpenters, masons, and fabricators. Key Features...

The Tie Down 65087 Hitch Clip is a compact, lightweight roof anchor designed to provide versatile attachment on residential roofs. It uses a keyhole pattern to accept guardrail posts, bunk jacks, and other staging equipment while functioning as a 5,000-lb single anchor point. The product comes ready to install and compatible with wood and metal substrates. Key Features Compact, lightweight powder-coated aluminum designKeyhole pattern supports guardrail posts, staging, and accessoriesRated to...

Ensure safety and compliance on your worksite with Spar-Marathon's Warning Line System. This system is engineered to provide quick setup and reliable protection. Key Features: OSHA Compliant: Meets OSHA Standard 29 CFR 1926.502(f) to ensure workplace safety.Effortless Setup: Designed for quick and easy installation, saving you time and labor costs.Portable and Lightweight: Each stand weighs just 34 lbs., making it easy to transport and set up on site.Flexible Configuration: Recommended spacing...

Compact, accurate, and easy to carry—the Keson RR112 RoadRunner is your grab-and-go wheel for fast distance takes on pavement, compacted soil, gravel, and short turf. A smooth-rolling wheel and top-mounted counter make readings effortless, while the trigger reset at the handle speeds re-measures. The foldable shaft, debris scraper, and kickstand keep it tidy and ready between pulls—perfect for estimating, layout, striping, landscaping, utilities, and general construction. Key Features...

The Tie Down 48579 Wedgie is a lightweight roofing accessory designed to keep shingles secure during installation by preventing them from sliding off. It is fabricated from durable polyurethane foam and supports up to 120 lb load per pad. With dimensions of 7 × 7 in and weighing approximately 2 lb, the Wedgie is easy to place under shingle tabs row by row and is ideal for maintaining roof alignment and reducing waste. Key Features Polyurethane foam construction for durability and lightweight...

FEATURES: Nose Buds Secure The Glass And Prevent Slipping While Providing A Pillow Soft Fit Strategic Placement Of Lens Insert Is Out Of User’s Direct Line Of Vision Exceeds ANSI Z87.1-2003 High Impact Requirements CE EN166 Certified CAN/CSA Z94.3-07

The Tie Down 48586 Corner Ladder Stabilizer enhances ladder safety when working near building corners or flat surfaces by providing extra clearance. The stabilizer offers an 18 in stand-off on flat surfaces, uses lightweight aluminum construction, and includes rubber end caps and mounting hardware. It fits aluminum extension ladders of various duty ratings and helps prevent ladder contact with siding or trim while improving stability. Key Features 18 in stand-off clears ladder from siding,...

Steel RACE 5 Gallon Asphalt Carrying Bucket includes a round bottom to prevent sticking to roof surfaces. It features a “D” style lower handle and a heavy ball top handle that resists falling against the bucket side. Key features: All-steel construction Round bottom to avoid asphalt sticking “D” type lower handle Heavy ball top handle that cannot fall against bucket side

Dynee Mytee is constructed with extra tough HPPE polyethylene fiber for maximum strength combined with minimum weight. If you're looking for a glove that is extremely durable, resistant to moisture, UV light and chemicals, this glove will get the job done. Coated with polyurethane for added protection and a solid grip. Extra Tough HPPE Shell for Maximum Strength Open Back Allows Hands to Breathe Knit Wrist Seals Out Dirt and Particles Excellent Tactile Sensitivity and Dexterity Polyurethane...

Used for electronics, glass cutting, sheet metal handling, parts assembly, sharp small parts handling, construction, and other general duty applicationsFeatures: Seamless construction offers increased comfort and breathability Dyneema Diamond and Lycra shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistancePolyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry gripKnit Wrist helps...

Replacement 6 Pt. Ratchet Suspension for Pyramex HP161 Cap Style Hard Hats

Lucas #8000 100% Silicone Roof Coating* is a 98% solids moisture-cure coating intended for the repair and restoration of asphalt, modified bitumen, metal, concrete, TPO, PVC, KEE(Fibertite), Hypalon (CSPE), PIB, and EPDM roofs. Silicone’s low water absorption allows for improved ponding water resistance. Fast cure time allows for same day recoating. Lucas #8000 is low odor, and contains no solvents or water, so it will not freeze! VOC compliant in all of North America. #8500 is a thicker...

The RACE Roller Mop Frame 18 in is designed to accommodate roller mop rollers for coating applications. It fits either aluminum or wood pin-type mop handles for compatibility. The frame is intended for use with additional components: a mop adapter, roller mop roller, and compatible handle. Key features: Fits aluminum or wood pin-type mop handles Designed to be used with roller mop rollers Compatible with coated and roofing materials Requires separate adapter, roller, and handle Constructed for...

The RACE FS2020 Face Shield w/ Foam Band features a clear PET visor and a hypoallergenic foam forehead strip for comfort. An elastic headband keeps the shield securely in place while accommodating glasses or safety goggles. The lightweight design offers splash protection against fluids and contaminants. Key features: Hypoallergenic foam band absorbs sweat and cushions the forehead Elastic strap provides a secure, adjustable fit Anti-fog PET visor maintains clarity of view Lightweight design...

The RACE 10 Ft Rope Ratchet provides a no-knot locking design that securely holds rope tension. It is compatible with ropes sized 1/4 inch to 3/8 inch in diameter. This durable, weather-resistant ratchet allows quick tensioning and controlled release through a thumb lever mechanism. Key features: 10 ft rope length No-knot locking design for secure tensioning Compatible with 1/4" to 3/8" diameter rope Thumb lever for controlled release Weather-resistant housing for extended service life ...

The Portals Plus Premolded Corners (items 52020, 51030 & 52030) provide pre-fabricated inside and outside corner flashings designed for parapet walls, mechanical openings, skylights, roof-top furnaces and other roof interface points. Each unit is injection-molded of 0.060″ thick EPDM (for single-ply membranes) or Neoprene (for built-up roofs) and features 8″ height with 6″ legs, radius corners, and feathered edges to optimize adhesion. The corners are ozone and ultraviolet light resistant, and...

ANSI Approved (ANSI/ISEA 107), TYPE R, CLASS 2 Hi-vis lightweight polyester mesh material. 2" silver reflective stripes. Hook and loop closure.

Multi Surface Protection Film is a durable, self-adhering protective film for hard surfaces, such as tile, marble, granite, vinyl, VCT, laminates and factory finished hardwood. It's not only great for floor protection but it can be used to prevent damage to most counter tops, tubs, sinks, doors and more! Ideal for remodeling, painting, moving, model home tours and parties, it is a true multipurpose product!

The Guardian Fall Protection 11202 Double-Leg Internal Shock (Tubular) Lanyard is a 6 ft. twin-leg fall arrest solution designed for continuous tie-off and increased mobility. Its tubular webbing conceals the integrated shock absorber, reducing bulk while effectively limiting fall arrest forces. The double-leg configuration provides 100% tie-off, allowing workers to stay connected when transitioning between anchorage points. Constructed with durable polyester tubular webbing and heavy-duty...

Designed and developed as a breathable cut resistant glove, MaxiCut® combines cut protection with comfort, flexibility and dexterity for dry environments.FEATURESMicro-Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistanceKnit Wrist helps prevent dirt and debris from entering the gloveInnovative Fibers - Unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfortReinforcement - Between...

The Malta Dynamics A6318 Adjustable Pitch Roof Anchor is a temporary anchorage connector designed for use on sloped wood roofs during roofing, remodeling, and construction work. The anchor bends over the roof peak or adjusts to match roof pitch, providing a tie-off point for personal fall arrest systems. Constructed from alloy steel, the anchor installs using 16d common nails through pre-punched holes for fast setup on the jobsite. Its removable design allows the anchor to be detached after...

Pyramex CNB12PKB Features: Cooling Beaded BandanaPolymer crystal beads provide heat stress relief.Conveniently ties around neck or head.To activate, simply soak in cool water then knead and spread cooling gel for comfortable fit.Reusable just reactivate.Machine washable.One size fits most.

This rebar impalement protection cover fits rebar sizes #7 through #12 and is made of engineered high-impact plastic with a steel reinforcing insert. It conforms to California OSHA #C1718AG and #C1723AG, complies with Federal OSHA 701(b), and features a 16 sq in top surface area for protection while self-centering to rebar. Key features: Fits rebar sizes #7 to #12 Engineered high-impact plastic construction Steel re-enforced insert to seat cover perpendicular to rebar 16 square inch top...

Rebar Impalement Protective Cover Adapter (DES-PCA) fits onto DISC-10 or HH-M protective covers to form a saddle that supports double 2×4s, creating a system to safeguard a line of in-line rebar. It meets California Safety Order C-1722-AG and Federal OSHA 701(b). Key features: Compatible with DISC-10 & HH-M protective covers  Forms a saddle to secure double 2×4s over rebar rows  Complies with California Safety Order C-1722-AG  Meets Federal OSHA 701(b) ...

Built for brutal jobsites and long pulls, the Keson NR18200 pairs a tough steel blade with a protective nylon coating to deliver accurate, readable lines—without the kinks, rust, and edge wear that kill ordinary tapes. The impact-ready housing and smooth crank make take-ups fast, while the hook end grabs confidently on stakes, rebar, or corners so you can measure solo with less fuss. Key Features Nylon-reinforced steel blade: Added abrasion and corrosion resistance for longer service life. 200...

The Malta Dynamics C5117 Double-Leg Stretch Lanyard provides continuous fall protection with a 100% tie-off design, allowing users to safely remain connected while transitioning between anchor points. This 4.5'–6' stretch lanyard features an internal shock absorber and two large rebar hooks for easy anchorage, plus a snap hook for connecting to the dorsal D-ring of a harness. Ideal for ironworkers, tower climbers, and construction professionals working at height.Keywords: Double-leg design...

The Kirby Fiberglass KF003 Applicator Monster is built for the toughest, largest floor jobs. Weighing 8.5 lb, this ultra-heavy-duty applicator is designed to deliver fast, consistent coverage of floor finishes, sealers, and coatings across expansive commercial and industrial spaces. Its “Monster” size helps reduce application time while promoting an even, professional-looking finish with fewer passes. Packed in a box of 6, the KF003 is ideal for high-demand janitorial crews, facility...

The Guardian Fall Protection 01605 Rebar Positioning Device is designed to provide workers with a safe and reliable means of connecting to rebar structures while performing elevated tasks. Constructed from high-strength alloy steel, this device ensures durability in demanding jobsite environments. It is engineered for use in positioning applications, allowing workers to maintain stability and secure tie-off while working hands-free on vertical rebar assemblies. Lightweight and easy to connect,...

The S-5! S-5-PV-41 Kit is a zero-penetration attachment solution engineered to secure framed photovoltaic modules to standing seam metal roofs. It accommodates module frame thickness of approximately 1.6 in (41 mm) to 2.4 in (60 mm). The kit includes a mounting disk (aluminum or stainless depending on clamp material), Universal PV Stud, PV Grab for module clamping, and a flange nut. Clamps or brackets are sold separately. The system ensures module-to-module electrical bonding and protects roof...

The S-5! K Grip Clamp is engineered for concealed-fastened, bulb snap-together roof profiles such as KlipLok®, Clip-Loc, KlipRib®, Speed Deck, Loc-Rib®, Mirage®, and similar panels. It uses side-bolts rather than setscrews, and the top mounting bolt is positioned over the center of the seam to reduce the moment arm, improving strength and minimizing seam distortion. Interchangeable inserts (sold separately) match various seam geometries. There is also a “Mini” version which is shorter and uses...

Level up your layout lines with contractor-grade, bright white marking chalk from Keson. The 1060W delivers crisp, easy-to-see lines for framing, layout, roofing, masonry, and general construction. Finely milled for smooth flow and even coating, it loads fast, sticks well to common jobsite surfaces in dry conditions, and cleans up easily when you’re done. Key Features Contractor-grade performance: Consistent, reliable line quality for daily pro use. Bright white, non-permanent color:...

The Malta Dynamics B0002 Harness Shoulder Pads are a comfort-enhancing accessory designed to reduce pressure and friction from full-body fall protection harnesses. Sold as a pair, these padded inserts easily attach to most standard harness shoulder straps, improving wearability for long shifts in construction, roofing, and industrial applications. Ideal for users seeking all-day comfort without sacrificing compliance. keywords: Sold as a pair for left and right shoulder strap coverage Soft...

Used in refrigerated areas, utilities, food processing, commercial fishing, construction, outdoor winter activities and recreation.FEATURESSeamless construction for a comfortable fitAcrylic gloves provide economical cold weather protectionNitrile foam coating provides superior grip in dry, wet and oily applicationsFully coated flat nitrile helps keep hands dry in wet applicationsKnit wrist helps prevent dirt and debris from entering the gloveHi-Vis coloring makes this product very easy to...

The Marathon BCTS49CR is a 4-inch Copper-Tite retrofit roof drain with a copper body, factory-applied tape seal, and clamping ring for watertight performance. It is designed for reroof and retrofit applications and includes a 10-inch ABS clamping ring and 10-inch polyethylene strainer. Available with a 14-inch small flange or an 18-inch large flange, the BCTS49CR features a 9-inch outlet length to fit securely into existing piping. Key Features: 4-inch retrofit drain with anti-backup tape seal...

PGHA85-BK is a height adjustable version of OMG’s PipeGuard designed to support rooftop pipe, conduit, or tubing with diameters from ½-inch to 4-inches. It lifts pipes to heights adjustable between 5-inches and 8½-inches above the roof surface using an adjustable stainless steel support, combined with an EPDM rubber base to protect roofing membranes. Its triangular design sheds water and the integral clamp allows quick tool securing. Key Features fits pipe sizes from ½-inch to 4-inches...

The Malta Dynamics C1004 Dual SRL Connector is a durable steel D-ring extension bracket that allows you to safely attach two single-leg SRLs to a single harness D-ring for 100% tie-off applications. Ideal for pairing Pygmy or other compact SRLs, this connector simplifies twin-leg configurations, maintains balance, and keeps SRLs aligned for smoother mobility.Keywords: Allows use of two single-leg SRLs on a single harness dorsal D-ring Heavy-duty steel D-ring bracket provides secure dual...

Used for electronics, glass cutting, metal handling, food processing and meat processing.FEATURESSeamless construction offers increased comfort and breathabilityDyneema® & Spandex shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistancePolyurethane coated palm and fingertips for great abrasion resistance, excellent puncture resistance and outstanding wet/dry gripKnit Wrist helps prevent dirt and debris from entering the gloveCotton color binding denotes...

Designed and developed as a breathable cut resistant glove, MaxiCut® combines cut protection with comfort, flexibility and dexterity for dry environments. FEATURES Micro-Foam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistanceKnit Wrist helps prevent dirt and debris from entering the gloveInnovative Fibers - Unique high performance yarns and fibers that offer cut protection while maintaining high levels of comfortReinforcement -...

Fits over most prescription glasses.Lightweight nylon temples adjust for length and pitch.Fits over frames up to 5 3/8" W x 1 3/4" H | 137mm x 44mm.Custom imprinting available.

The Malta Dynamics K1001 Equipment Pro Bag is a heavy-duty, jobsite-ready gear bag built to carry your fall protection equipment, PPE, and tools with ease. Designed for durability and convenience, this rugged duffel features reinforced handles, weather-resistant material, and ample space for harnesses, lanyards, helmets, and more. Whether you're heading to the roof or the field, it keeps your gear organized and protected. keywords: Spacious main compartment holds a full-body harness, lanyard,...

Residential Guardrail System meets or exceeds OSHA standards and adjusts from flat roof up to a 16:12 pitch. The package includes one roof bracket, one toeboard bracket, one leg insert, and one upright; it can also be used to catch debris during shingle installation. Key features: Meets or exceeds OSHA standards  Adjustable from flat roof up to 16:12 pitch  Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright  Can be used to catch debris for removal during...

The SAS-2801 ARS 2×8 is a permanent stainless steel roof anchor designed for residential fall protection applications. It installs to 2×4, 2×6, or 2×8 rafters and can be drill-through mounted on 2×10 or 2×12 members. Each anchor includes a TPE flashing and stem cover to integrate with asphalt shingle or wood shake roofing while maintaining a watertight seal. Features Permanent fall protection roof anchor Stainless steel construction, 5,000 lb minimum strength Supports 2×4, 2×6, 2×8 rafters;...

S-5! R Clamp is a structural, non-penetrating clamp engineered for attachment to ribbed standing seam metal roof profiles (e.g. Rib Roof® and similar). It securely holds roof-mounted accessories like snow guards, signage, lighting, or solar without piercing the panel. Made of structural aluminum, it comes with stainless steel hardware and includes an M8 bolt for accessory mounting. The clamp can be installed optionally with a supplemental sheet-metal screw for added holding strength....

The Portals Plus 67255 Underdeck Clamping Ring is a cast-aluminum accessory designed to secure a roof drain bowl to the deck structure. By clamping the drain under the deck substrate or membrane flange, it maintains alignment and prevents movement of the drain bowl under load. It is compatible with roof drain systems that require an under-deck clamp and is suitable for both retrofit and new-construction drain assemblies. Key features: Cast-aluminum construction offers durability and corrosion...

The Malta Dynamics C5106 Double-Leg Stretch Lanyard is a 100% tie-off fall protection solution designed to maximize safety during transitions between anchor points. Its stretchable 4.5'–6' design minimizes tripping hazards, while the internal shock absorber and three ANSI-compliant snap hooks ensure secure, low-impact fall arrest performance. Perfect for construction, roofing, maintenance, and industrial applications.Keywords: Double-leg design allows continuous tie-off for safer climbing and...