Subfloors

FEDERAL OSHA 1926.502(B)(3): Guardrail system shall be capable of withstanding, without failure, a force of at least 200 pounds (890N) applied within 2 inches (5.1 cm) of the top edge, in any outward or downward direction, at any point along the top edge. PRODUCT SPECIFICATIONS: Base: Durable high strength plastic Dimensions: 8½ (L) x 5¾ (W) x 5¼ (H) FEATURES: Durable high strength plastic Pliable, yet flexible to withstand harsh job-site environments and abuse Reusable Safety orange for high...

The Safety Bar is a temporary, reusable open-framing anchor that gives crews a safe tie-off point before sheathing or full bracing. It spans three trusses, locks in with stainless detent pins, and automatically gauges trusses at 24" on center. Rated for two users and compatible with shock-absorbing lanyards or SRLs, it’s a fast, rugged solution for truss-stage fall protection. Features Made for 2×4 top chords: Model 1010 sized for 2×4 trusses; bars for other sizes available separately. ...

The Moveable ARS 2x8 is a permanent, flashed roof anchor designed to mount to 2x8 top chords and stay in place for the life of the roof. It provides a low-profile tie-off point you can position to suit the shingle layout, then seal in with the included flashing kit for a clean, watertight finish. Built for single-person fall arrest or restraint with a 5,000 lb rating, it uses heavy-duty hardware for a rigid, durable connection and a molded stem cover to keep water out and the installation...

The Combo Safety Bar is a temporary, reusable open-framing anchor designed to protect crews during the truss-setting phase—before sheathing is installed. It spans three trusses, auto-gauges spacing at 24 inches on center, and locks on with stainless detent pins. The dual-size saddle design fits both 2x4 and 2x6 top chords, so one bar covers multiple framing packages. Rated for two users when used with appropriate PFAS components, the bar provides a rugged, highly visible tie-off point that...

The Guardian Fall Protection CB-1-B Bolt-On Wall Anchor (00600) is a permanent fall protection solution designed for use on wood, steel, or concrete wall structures. Constructed from heavy-duty galvanized steel, this anchor provides a secure tie-off point for fall arrest, restraint, or work positioning applications. The CB-1-B is designed for bolt-on installation, offering long-term durability and stability, making it ideal for both residential and commercial construction environments. Fully...

The Guardian Fall Protection Swivel Concrete Anchor (00242) is a heavy-duty, reusable anchorage connector designed for concrete surfaces. Featuring a 360° swiveling D-ring, this anchor allows lifelines, SRLs, and lanyards to rotate freely, reducing line tangling and improving worker mobility. Constructed from high-strength steel with a zinc-plated finish for corrosion resistance, the 00242 provides a reliable tie-off point for fall arrest and restraint systems. It installs quickly into cured...

This truss anchor kit is designed for permanent installation on wood roof truss members 2 × 4 or larger. It features a 10-3/4-inch stainless steel post with an 11/16-inch connecting eye, a weather-resistant post cap with zip-tie, and a 10-inch roof flange. The kit includes stainless steel nails for installation and meets OSHA 1926.502 fall-protection anchorage requirements. Key features: 10-3/4″ stainless steel post with 11/16″ connecting eye  Weather-resistant post cap with zip-tie and...

The Guardian Fall Protection Stair Mount Guardrail System (61141) provides a secure and OSHA-compliant guardrail solution for stairways on residential, commercial, and industrial job sites. Designed to work with standard 2×4 lumber, this system creates stable stair rails that meet OSHA requirements for fall protection and worker safety. Constructed from high-strength powder-coated steel, the 61141 system is lightweight, durable, and reusable, making it an essential accessory for temporary...

The Safety Bar 1011 is a temporary, reusable open-framing anchor built specifically for 2x6 top chords. It spans three trusses, locks in place with stainless detent pins, and gives crews a safe, stable tie-off point during the hardest stage to protect—before roof sheathing is installed. Rated for two users and rugged enough for everyday jobsite use, it sets spacing, speeds production, and helps maintain compliant fall protection from the moment trusses go up. Features Purpose-built for 2x6...

The Guardian Fall Protection Stair Mount Guardrail System (61140) is a versatile fall protection solution designed specifically for stairways. Unlike the 61141 model which uses 2×4 lumber rails, the 61140 is engineered to work with Guardian’s standard guardrail posts, allowing for quick installation of compliant stair guardrails. Constructed from powder-coated steel, the 61140 system provides durability, reusability, and long-term resistance to jobsite conditions. Lightweight and easy to...

The Guardian Fall Protection Bolt Hole Anchor (00230) is a reusable, portable anchorage connector designed for use in precast concrete or steel bolt holes. Constructed from high-strength alloy steel, this anchor installs quickly into compatible holes, creating a secure tie-off point for fall arrest, work positioning, or restraint. Lightweight and compact, it is ideal for applications where mobility and reusability are required. The 00230 provides reliable safety at height and is fully OSHA and...

The Guardian Fall Protection CB-1-W Weld-On Wall Anchor (00610) is a permanent anchorage connector engineered for welding onto steel wall structures. Made from heavy-duty steel, this anchor delivers a secure and permanent tie-off point for fall arrest, restraint, or work positioning systems. Its weld-on design ensures maximum stability and durability for long-term safety solutions in industrial and commercial environments. Built for reliability under tough conditions, the Guardian 00610 CB-1-W...

This anchor is intended for permanent installation on wood truss structures to provide a secure attachment point for fall-protection systems. It features a stainless-steel construction designed for long-term use and includes a fixed D-ring connection point. The anchor installs directly onto the truss and provides a reliable tie-off location for personal fall-arrest equipment. Key features: Designed for permanent installation on wood truss structures Stainless-steel body for long-term...