Roof Weatherproofing Safety

The Guardian Fall Protection Temper Reusable Roof Peak Anchor (00455) is a heavy-duty, cost-effective fall protection anchorage connector designed for temporary installation on residential and commercial roofing projects. Made from zinc-plated steel, this anchor installs over the roof peak and provides a secure tie-off point for a single worker. Its reusable design makes it ideal for contractors who work across multiple jobsites, while the included fasteners simplify installation. Compact...

The Guardian Fall Protection Two-Way Standing Seam Roof Anchor (10600) is designed for safe and secure attachment on standing seam metal roof systems. Featuring a two-way tie-off design, it provides dual-direction anchorage for improved mobility and flexibility. Constructed of durable, corrosion-resistant steel, the 10600 anchor clamps directly onto standing seams without penetrating the roof surface, preserving roof integrity. Its reusable design makes it ideal for both temporary and...

The Guardian Bull Ring Anchor (00484) is a durable and reusable roof anchor designed for wood substrates. Made from galvanized steel (also available in stainless steel), this anchor features a pivoting bull ring that offers 360° loading for flexible fall arrest tie-off options. Lightweight and easy to install using included fasteners (nails or lag screws), it’s ideal for residential projects where anchor repositioning is needed. Rated for one user (130–420 lb) and tested to a minimum breaking...

A compact, economical shingle-roof anchor that blends in and installs fast. The D-Minus uses a 7/8" connector hole instead of a D-ring and mounts with six fasteners into wood framing. Choose gray powder-coated 11-ga steel or 11-ga 430 stainless to match your environment. For retrofit installs over existing shingles, pair it with the RetroFlash flashing to cover the anchor and fasteners for a clean, weather-protected finish. Features Low-profile, shingle-roof design — specified for asphalt...

The ACRO 12070 Steep-Pitch Guardrail System includes a bracket and post designed to provide fall protection, slide-guard, and toeboard on eave edges of roofs with slopes ranging from 4/12 to 16/12. Easy to install and remove like a roof bracket, it interleaves with shingles and supports 2×4 cross-rails and a toe board setup. Lab-tested to OSHA 2011 requirements, it facilitates early guardrail installation—even before shingle installation or removal—without damaging roofing materials. With a...

The Guardian Fall Protection Snappy Disposable Roof Anchor (00710) is a cost-effective, temporary fall protection solution for residential and commercial roofing projects. Made from galvanized steel, each anchor is lightweight yet durable, designed to be easily nailed onto a wood roof surface to provide a secure tie-off point for personal fall arrest systems. Once a project is completed, the anchors can be left behind or removed as needed. This bulk pack of 25 anchors is ideal for contractors...

The D-Minus anchor is our most economical fall arrest anchor and is available in gray powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied stainless steel spiral shank nails or an optional #12 screws. This anchor is specified for use on asphalt shingle roofing and is low profile making them difficult to notice on the roof. This anchor can be used for new construction, reroof or retrofitting onto existing roofs. In addition, this anchor can be used...

The RS-20 anchor is a permanent roof anchor designed specifically for tile, slate, wood and synthetic roofing materials. The 20” long strap allows you to adjust the reveal of the D-ring for your specific roofing material and the unique design of the anchor also allows you to physically bend the D-ring portion of the anchor up and over the tile or slate so that it lays flat on the surface. This permanent, low profile anchor comes with stainless steel attachment hardware and comprehensive...

The Guardian Halo Reusable Anchor (00482) is a ridge-mounted fall protection point engineered for residential roofs. Featuring a rubber-hinge design that allows it to straddle roof ridges and a chain-mounted O-ring that moves with the user, this zinc-plated steel anchor supports a 5,000 lb minimum breaking strength. It installs easily with included fasteners into wood or metal decks, works on pitches up to 12/12, and is suitable for personal fall arrest, restraint, or work positioning systems....

This roof anchor is designed for permanent installation under wood roof ridge materials and leaves the D-ring exposed for fall-protection equipment attachment. It features a stainless-steel body with a 17″ nailing surface and a 2″ connecting D-ring. The package includes 16D stainless-steel nails for installation to wood structures, and the anchor meets OSHA 1926.502 regulations for fall-arrest anchorage. Key features: 17″ stainless-steel nailing plate designed for installation under roof...

A reusable, hinged roof anchor for fast, reliable tie-off on wood-framed roofs. The 3006 mounts at the ridge or in the field and accepts nails (included) or approved screws. Built from 11-gauge zinc-coated steel and rated to 5,000 lb for single-user fall arrest/restraint, it conforms to steep pitches or lays flat on the deck and meets common OSHA/ANSI requirements. Features 1-person roof anchor for wood framing; install at ridge or field locations. 11-gauge zinc-coated steel construction for...

This roof anchor is designed for permanent installation under wood roof ridge caps to provide a secure tie-off point for fall-protection systems. It features a 12″ stainless-steel nailing plate and two 2-¼″ plated alloy-steel D-rings. The unit includes 16D stainless-steel nails for installation on wood roof structures and is engineered to meet the requirements for overhead anchorage in wood-roof applications. Key features: Stainless-steel 12″ nailing plate designed for wood roof ridge...

#1 selling anchor for reroof, new construction and remodeling. The low-profile design is aesthetically pleasing and is designed to last the life of the structure. The Retro-Fit is designed to give all who access the roof a reliable tie-off point. Installs with just 8 nails and comes with special butyl waterproof flashing strips to seal the stainless-steel nails. Fabricated with 430 stainless steel and certified for over 5,000 pounds. Use over asphalt shingle, wood shake or metal roofing, the...

This overhead anchorage connector is designed for fixed position installation onto steel I-beams, columns or other steel structures using user-supplied fasteners. The anchoring plate measures 2″ × 4½″ and is made of alloy steel. The forged alloy D-ring provides a 5,000-lb minimum static strength tie-off point. The unit complies with ANSI Z359.18-2017 for fall protection anchorages. Key features: Forged D-ring and bolt-on plate designed for use on steel I-beams, columns and other steel...

The ACRO 12075 Open Edge Guardrail System provides comprehensive fall protection around roof edges by combining a bracket and interchangeable post. Crafted for use on rake-edges of any pitch and eave-edges up to 4/12, this system installs similarly to standard roof brackets, interleaves with shingles, and supports 2×4 cross-rails and toe boards without damaging roofing materials. When paired with the 12070 Steep-Pitch Guardrail System along steeper eaves, it forms a complete perimeter safety...

The Guardian Fall Protection Residential Guardrail System (15173) provides a safe, easy-to-install, and OSHA-compliant fall protection solution for residential roofing applications. Designed to work with pitched roofs and framing, this system creates a secure perimeter guardrail without requiring roof penetration. Adjustable for various pitches, the 15173 system supports standard lumber rails and offers durable steel construction with a powder-coated finish to resist jobsite wear. Lightweight...

The RS-10 is a compact, stainless steel retrofit anchor designed for fast, watertight installs on new or existing shingle roofs. At 8-1/2" long, it sits over the roofing material and provides a low-profile, single D-ring tie-off for routine access, service work, and permanent protection. Rated to 5,000 lb and compliant with OSHA/ANSI, it’s a rugged, one-person anchorage you can trust at the ridge, hip-ridge, or in the field. Features Built for shingles & retrofits: 8-1/2" length allows...

Tie-Off Straps are made from 2” wide polyester or nylon and are designed for use as temporary anchorage points to connect vertical lifelines, SRL’s, web lanyard and rope lanyards. Use on wood, steel and concrete structures. Tie-Off straps are wrapped, cinched around the structure to make for a secure anchor or can be embedded into concrete and evacuated when finished with the job. Please see the part number list below for Application, Length, Compliance and Packaging information for all our...

This overhead anchorage connector is constructed for permanent mounting on steel I-beams or columns. It features a 2″ × 4½″ unplated alloy steel anchoring plate ideal for weld-on installation, and a plated alloy steel D-ring rated at 5,000 lb minimum static strength. The unit also provides ½″ bolt holes for optional fixed-position installation when welding is not used. Key features: 2″ × 4½″ unplated alloy steel anchoring plate optimized for weld-on installation Plated alloy steel D-ring rated...

Purpose-built for tile and slate roofs, the 2815T is a permanent, low-profile double D-ring anchor that slides under the last course so only the rings show. Its extended strap (with ~40" between D-rings) lets you hit structure while keeping a clean look, and it installs without penetrating the sheathing. A factory butyl strip and stainless fasteners help deliver a water-resistant, long-lasting tie-off point that meets OSHA/ANSI. Features Tile/slate ready: Designed for high- and low-profile...

The ACRO 12048 Steel Wall Scaffold Bracket is a heavy-duty attachment designed to install over wall sheathing just below eave height, enabling safe and stable walkway staging for tasks like installing trusses, plywood, shingles, fascia, gutters, and under-eave treatments. Constructed from robust steel and finished in powder-coated safety yellow, it incorporates a 3/16" sway brace (swapable for right or left use) and is secured with a 5/8" safety bolt and clip for added stability. Each bracket...

The Guardian Fall Protection Guardrail Post (15175) is a 42-inch steel post designed for use with Guardian’s guardrail systems to provide OSHA-compliant fall protection. Rugged, reusable, and powder-coated for corrosion resistance, this post installs easily into compatible bases, clamps, or gussets and securely holds standard 2×4 or 2×6 lumber rails. Suitable for both temporary and permanent applications, the 15175 guardrail post is an essential component for creating reliable, code-compliant...

The Guardian Fall Protection Universal Guardrail Post (61133) is a 52-inch steel guardrail post designed for use with Guardian guardrail systems to provide OSHA-compliant fall protection. Taller than standard 42-inch posts, this universal post offers additional height for enhanced safety, particularly where extra coverage is needed on rooftops, decks, stairways, or elevated work platforms. It accepts standard 2×4 or 2×6 lumber rails and installs easily into compatible bases, clamps, or...

The Guardian Fall Protection Beamer 2000 Fall Arrest Anchor (00101) is a versatile and reusable anchor point designed for use on structural steel I-beams. Adjustable to fit beam flanges ranging from 3.5 to 14 inches wide and up to 1.25 inches thick, it provides a secure and OSHA-compliant tie-off point for fall arrest systems. Constructed from durable steel and aluminum components, the Beamer 2000 installs quickly without tools and can be repositioned as needed, making it an excellent choice...

A permanent roof anchor engineered for pre-engineered metal buildings that use Z-purlins. The Super Z-Purlin Anchor provides a discreet, code-compliant tie-off point for routine access and service work. The single pack includes everything needed for a watertight install—anchor, stem, EPDM flashing with vulcanized aluminum strip, Grade 8 bolts, and the installation manual—so crews can achieve a clean, reliable finish in one visit. Rated to 5,000 lb for one user, it’s built from...

Built for metal building purlin structures, this permanent Z-purlin anchor provides secure, single-user connection for both fall arrest and fall restraint. The 11-gauge 430 stainless steel body resists corrosion, while an EPDM flashing base with a vulcanized aluminum strip helps seal out weather. Rated to 5,000 lb minimum breaking and tensile strength, it’s a rugged, long-term solution for rooftop safety on industrial and commercial sites. Features Dual-mode safety: Supports fall arrest and...

The Guardian Fall Protection Window Gap Anchor (15176) is a portable, adjustable anchorage connector designed for installation in window and wall openings. Its innovative design uses a compression fit to create a secure tie-off point without the need for drilling or fasteners. Made from durable, powder-coated steel, the Window Gap Anchor is reusable and easy to transport, making it ideal for temporary applications. Designed for use in construction and industrial environments, the Guardian...

The Guardian Fall Protection Universal Guardrail Post (61135) is a 65-inch steel post designed to provide enhanced fall protection where greater guardrail height is required. Taller than standard 42-inch and 52-inch posts, this 65-inch model offers additional coverage for unique jobsite conditions, making it ideal for commercial, industrial, and specialized residential applications. It is compatible with Guardian bases, gussets, and parapet clamps, and securely holds standard 2×4 or 2×6 lumber...

Residential Guardrail System meets or exceeds OSHA standards and adjusts from flat roof up to a 16:12 pitch. The package includes one roof bracket, one toeboard bracket, one leg insert, and one upright; it can also be used to catch debris during shingle installation. Key features: Meets or exceeds OSHA standards  Adjustable from flat roof up to 16:12 pitch  Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright  Can be used to catch debris for removal during...

The Guardian Fall Protection Beamer 2000 Fall Arrest Anchor (00103) is a reusable beam anchor engineered for secure fall arrest tie-off on structural I-beams. It adjusts to fit flange widths from 6 to 16 inches and flange thicknesses from 0.5 to 1.25 inches, making it ideal for a wide variety of steel erection, welding, and construction applications. Built from aluminum, steel, and nylon components, the Beamer 2000 installs quickly, travels smoothly along beams, and can be repositioned without...

Residential Guardrail Gable/Rake System meets or exceeds OSHA standards. It is adjustable from flat roof up to a 16:12 pitch. The system includes one roof bracket, one toeboard bracket, one leg insert, and one upright. It can be used to collect debris for removal during shingle installation. Key features: Meets or exceeds OSHA standards  Adjustable from flat roof up to 16:12 pitch  Includes: 1 roof bracket, 1 toeboard bracket, 1 leg insert, 1 upright  Can be used to catch debris...

The Guardian Stacker Bracket Toe Board Attachment (61142) is a sturdy accessory designed for use with Guardian’s Stacker Bracket hanging scaffolding system. Crafted from powder-coated steel for enhanced durability, this attachment allows for the secure installation of toeboards—critical for preventing tools and materials from falling to lower levels. Lightweight and reusable, it integrates seamlessly with the scaffold system to enhance safety on elevated work surfaces. Fully compliant with...